27 Jun
2018
27 Jun
'18
11:45 a.m.
Good day everyone,
when I try to open
info:coreutils/dd invocation
in konqueror it fails with this error message:
An error occurred while loading info:coreutils/dd invocation:
Could not start process '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'.
The mentioned files are all there. I may miss some package which I haven't installed
as this is a new system but I can't figure out which one.
Any advice or hint would be much appreciated.
Thanks,
Stefan
25 Jul
25 Jul
10:28 a.m.
New subject: [trinity-users] info: in konqueror fails
Am Mittwoch 27 Juni 2018 schrieb Stefan Krusche:
Good day everyone,
when I try to open
info:coreutils/dd invocation
in konqueror it fails with this error message:
An error occurred while loading info:coreutils/dd invocation:
Could not start process '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'.
The mentioned files are all there. I may miss some package which I haven't
installed as this is a new system but I can't figure out which one.
Any advice or hint would be much appreciated.
Thanks,
Stefan
Until TDE R14.0.4 this has always worked. Could anyone try to
enter "info:coreutils/dd invocation" in the location field in konqueror,
please, and check if it throws an error, too?
I have no clue where to look. The perl script which konqueror claims to be not
able to start ships with TDE and is very old, that is probably unchanged since
decades.
When I start this script in bash it throws this error:
$ /opt/trinity/share/apps/tdeio_info/kde-info2html
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'
Can't use 'defined(@array)' (Maybe you should just omit the defined()?)
at /opt/trinity/share/apps/tdeio_info/kde-info2html line 154.
I have absolutely no experience with perl, unfortunately.
Any advice or hint what I could do would be very much appreciated.
Kind regards,
Stefan
10:34 a.m.
New subject: [trinity-users] info: in konqueror fails
On Wed, Jul 25, 2018 at 6:28 AM, Stefan Krusche <linux(a)stefan-krusche.de> wrote:
Until TDE R14.0.4 this has always worked. Could anyone
try to
enter "info:coreutils/dd invocation" in the location field in konqueror,
please, and check if it throws an error, too?
Indeed. Konqueror R14.0.5 (Using Trinity R14.0.5 [DEVELOPMENT]) on Debian9:
An error occurred while loading info:coreutils/dd invocation:
Could not start process '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/kdeclassic/22x22/actions' 'coreutils' 'dd
invocation'.
--
The secret of happiness is freedom,
and the secret of freedom is courage.
- Thucydides
10:49 a.m.
New subject: [trinity-users] info: in konqueror fails
Am Mittwoch 25 Juli 2018 schrieb Curt Howland:
Thank you for checking.
On Wed, Jul 25, 2018 at 6:28 AM, Stefan Krusche
<linux(a)stefan-krusche.de>
wrote:
Until TDE
R14.0.4 this has always worked. Could anyone try to
enter "info:coreutils/dd invocation" in the location field in konqueror,
please, and check if it throws an error, too?
Indeed. Konqueror R14.0.5 (Using Trinity R14.0.5 [DEVELOPMENT]) on Debian9:
An error occurred while loading info:coreutils/dd invocation:
Could not start process '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/kdeclassic/22x22/actions' 'coreutils' 'dd
invocation'. 
10:46 a.m.
New subject: [trinity-users] info: in konqueror fails
Hi!
Am Mittwoch, 25. Juli 2018 schrieb Stefan Krusche:
Am Mittwoch 27 Juni 2018 schrieb Stefan Krusche:
I get this message:
Beim Laden von info:coreutils/dd invocation ist folgender Fehler aufgetreten:
Prozess '/usr/bin/perl' '/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/32x32/actions' 'coreutils' 'dd
invocation' kann nicht gestartet werden.
Nik
Good day everyone,
when I try to open
info:coreutils/dd invocation
in konqueror it fails with this error message:
An error occurred while loading info:coreutils/dd invocation:
Could not start process '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'.
The mentioned files are all there. I may miss some package which I haven't
installed as this is a new system but I can't figure out which one.
Any advice or hint would be much appreciated.
Thanks,
Stefan
Until TDE R14.0.4 this has always worked. Could anyone try to
enter "info:coreutils/dd invocation" in the location field in konqueror,
please, and check if it throws an error, too?
I have no clue where to look. The perl script which konqueror claims to be not
able to start ships with TDE and is very old, that is probably unchanged since
decades.
When I start this script in bash it throws this error:
$ /opt/trinity/share/apps/tdeio_info/kde-info2html
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'
Can't use 'defined(@array)' (Maybe you should just omit the defined()?)
at /opt/trinity/share/apps/tdeio_info/kde-info2html line 154.
I have absolutely no experience with perl, unfortunately.
Any advice or hint what I could do would be very much appreciated.
Kind regards,
Stefan
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
10:52 a.m.
New subject: [trinity-users] info: in konqueror fails
On Wednesday 25 July 2018 12.46:40 Dr. Nikolaus Klepp wrote:
I get this message:
Beim Laden von info:coreutils/dd invocation ist folgender Fehler
aufgetreten: Prozess '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/32x32/actions' 'coreutils' 'dd
invocation' kann nicht gestartet werden.
Nik
I get this (very close to Nik):
Could not start
process '/usr/bin/perl' '/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/kdeclassic/22x22/actions' 'coreutils' 'dd
invocation'.
By the way, can anyone tell me what I've been doing with this "coreutils dd
invocation" (sounds like black magic :)
Thierry
11:23 a.m.
New subject: [trinity-users] info: in konqueror fails
Am Mittwoch 25 Juli 2018 schrieb Thierry de Coulon:
On Wednesday 25 July 2018 12.46:40 Dr. Nikolaus Klepp
wrote:
With konqueror you used to be able to read/browse UNIX info pages, like man
pages. For a little more info type "help:/konqueror/man-info.html" in
konqueror's address field.
In a shell that would be:
$ info coreutils 'dd invocation'
which launches the "info" programm to show the page for "dd" commande
which is
part of "coreutils".
Kind regards,
Stefan
I get this message:
Beim Laden von info:coreutils/dd invocation ist folgender Fehler
aufgetreten: Prozess '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/32x32/actions' 'coreutils' 'dd
invocation' kann nicht gestartet werden.
Nik
I get this (very close to Nik):
Could not start
process '/usr/bin/perl'
'/opt/trinity/share/apps/tdeio_info/kde-info2html'
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/kdeclassic/22x22/actions' 'coreutils' 'dd
invocation'.
By the way, can anyone tell me what I've been doing with this "coreutils dd
invocation" (sounds like black magic :)
Thierry 
11:27 a.m.
New subject: [trinity-users] info: in konqueror fails
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Bug fixed and pushed. Will be available in R14.0.5.
By the way, can anyone tell me what I've been
doing with this "coreutils dd invocation" (sounds like black magic
:)
It will show the man page of dd
Cheers
Michele
-----BEGIN PGP SIGNATURE-----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=vXVu
-----END PGP SIGNATURE-----
11:36 a.m.
New subject: [trinity-users] info: in konqueror fails
Am Mittwoch 25 Juli 2018 schrieb Stefan Krusche:
When I start this script in bash it throws this
error:
$ /opt/trinity/share/apps/tdeio_info/kde-info2html
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'
Can't use 'defined(@array)' (Maybe you should just omit the defined()?)
at /opt/trinity/share/apps/tdeio_info/kde-info2html line 154.
In the script there is:
150 while (<DIR>) {
151 next if $looking && !/\* Menu/;
152 $looking = 0;
153 my @item = &ParseMenuItem($_,'dir');
154 if (!defined(@item)) { next }
155 my ($MenuLinkTag, $MenuLinkFile, $MenuLinkRef, MenuLinkText) =
@item;
156 if ($MenuLinkRef eq $FileName) {
157 &Redirect($MenuLinkFile, $MenuLinkTag);
158 exit 0;
159 }
160 }
Would it make sense to just do what the error message suggests, like this?:
154c154
< if (!defined(@item)) { next }
---
if (!@item) { next }
Kind regards,
Stefan
11:47 a.m.
New subject: [trinity-users] SOLVED: info: in konqueror fails
Am Mittwoch 25 Juli 2018 schrieb Stefan Krusche:
Am Mittwoch 25 Juli 2018 schrieb Stefan Krusche:
This patch made the script work again:
RCS file: ./RCS/kde-info2html,v
retrieving revision 1.1
diff -u -r1.1 ./kde-info2html
--- ./kde-info2html 2018-07-25 13:33:38+02 1.1
+++ ./kde-info2html 2018-07-25 13:39:20+02
@@ -151,7 +151,7 @@
next if $looking && !/\* Menu/;
$looking = 0;
my @item = &ParseMenuItem($_,'dir');
- if (!defined(@item)) { next }
+ if (!@item) { next }
my ($MenuLinkTag, $MenuLinkFile, $MenuLinkRef, $MenuLinkText) =
@item;
if ($MenuLinkRef eq $FileName) {
&Redirect($MenuLinkFile, $MenuLinkTag);
@@ -406,7 +406,7 @@
sub MenuItem2HTML {
my ($Line, $BaseInfoFile) = @_;
my @parse_results = &ParseMenuItem($Line, $BaseInfoFile);
- if (!defined (@parse_results)) { return $Line; }
+ if (!@parse_results) { return $Line; }
my ($MenuLinkTag, $MenuLinkFile, $MenuLinkRef, $MenuLinkText) =
@parse_results;
#-- produce a HTML line
return "<tr class=\"infomenutr\"><td
class=\"infomenutd\"
width=\"30%\"><ul><li><a
href=\"info:/$MenuLinkFile/$MenuLinkTag\">$MenuLinkRef</a></ul></td><td
class=\"infomenutd\">$MenuLinkText";
But, as I'm an absote perl newbie, someone with perl knowledge should probably
check if that's okay. If so, it would be nice to include it upstream.
Thanks everybody
Stefan
When I start this script in bash it throws this
error:
$ /opt/trinity/share/apps/tdeio_info/kde-info2html
'/opt/trinity/share/apps/tdeio_info/kde-info2html.conf'
'/opt/trinity/share/icons/crystalsvg/22x22/actions' 'coreutils' 'dd
invocation'
Can't use 'defined(@array)' (Maybe you should just omit the defined()?)
at /opt/trinity/share/apps/tdeio_info/kde-info2html line 154.
In the script there is:
150 while (<DIR>) {
151 next if $looking && !/\* Menu/;
152 $looking = 0;
153 my @item = &ParseMenuItem($_,'dir');
154 if (!defined(@item)) { next }
155 my ($MenuLinkTag, $MenuLinkFile, $MenuLinkRef,
MenuLinkText) = @item; 156 if ($MenuLinkRef eq $FileName)
{
157 &Redirect($MenuLinkFile, $MenuLinkTag);
158 exit 0;
159 }
160 }
Would it make sense to just do what the error message suggests, like this?:
154c154
< if (!defined(@item)) { next }
---
if (!@item) { next }
12:17 p.m.
New subject: [trinity-users] SOLVED: info: in konqueror fails
Am Mittwoch 25 Juli 2018 schrieb Stefan Krusche:
This patch made the script work again:
RCS file: ./RCS/kde-info2html,v
retrieving revision 1.1
diff -u -r1.1 ./kde-info2html
--- ./kde-info2html 2018-07-25 13:33:38+02 1.1
+++ ./kde-info2html 2018-07-25 13:39:20+02
@@ -151,7 +151,7 @@
next if $looking && !/\* Menu/;
$looking = 0;
my @item = &ParseMenuItem($_,'dir');
- if (!defined(@item)) { next }
+ if (!@item) { next }
my ($MenuLinkTag, $MenuLinkFile, $MenuLinkRef,
$MenuLinkText) = @item;
if ($MenuLinkRef eq $FileName) {
&Redirect($MenuLinkFile, $MenuLinkTag);
@@ -406,7 +406,7 @@
sub MenuItem2HTML {
my ($Line, $BaseInfoFile) = @_;
my @parse_results = &ParseMenuItem($Line, $BaseInfoFile);
- if (!defined (@parse_results)) { return $Line; }
+ if (!@parse_results) { return $Line; }
my ($MenuLinkTag, $MenuLinkFile, $MenuLinkRef, $MenuLinkText) =
@parse_results;
#-- produce a HTML line
return "<tr class=\"infomenutr\"><td
class=\"infomenutd\"
width=\"30%\"><ul><li><a
href=\"info:/$MenuLinkFile/$MenuLinkTag\">$MenuLinkRef</a></ul></td><td
class=\"infomenutd\">$MenuLinkText";
But, as I'm an absote perl newbie, someone with perl knowledge should
probably check if that's okay. If so, it would be nice to include it
upstream.
So, there is already a bug report: #2822 and it is already fixed in commit
e436f535 (for R14.0.x) just today: 2018-07-25 10:52:48. What a coincidence. I
should have been looking before I started to tamper ;-).
Will this patch be in TDE preliminary stable builds (R14.0.5) soon or do I have
to wait for the official release?
Thanks,
Stefan
12:28 p.m.
New subject: [trinity-users] SOLVED: info: in konqueror fails
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
On 2018/07/25 09:17 PM, Stefan Krusche wrote:
So, there is already a bug report: #2822 and it is
already fixed in commit e436f535 (for R14.0.x) just today:
2018-07-25 10:52:48. What a coincidence. I should have been looking before I started to
tamper ;-).
It is no coincidence. I saw your first email, remember something about a
similar bug and took a look.
The fix was easy, so it made it into R14.0.5 just passed the very last minute (we had
frozen R14.0.5 yesterday but
allowed an exception for this patch).
Will this patch be in TDE preliminary stable builds (R14.0.5) soon or do I have to wait
for the official release?
Yes, it will be in PSB as well. Nevertheless it may take a
bit longer than usual for the new packages to appear
online, since now pre-build process of R14.0.5 has started on Slavek's servers.
cheers
Michele
-----BEGIN PGP SIGNATURE-----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=HIrO
-----END PGP SIGNATURE-----
12:49 p.m.
New subject: [trinity-users] SOLVED: info: in konqueror fails
Am Mittwoch 25 Juli 2018 schrieb Michele Calgaro:
Alright. Until then I can apply my own patch ;-)
On 2018/07/25 09:17 PM, Stefan Krusche wrote:
Great! That's good news. Much appreciated!
Kind regards,
Stefan
So, there is already a bug report: #2822 and it
is already fixed in
commit e436f535 (for R14.0.x) just today: 2018-07-25 10:52:48. What a
coincidence. I should have been looking before I started to tamper ;-).
It is no coincidence. I saw your first email, remember something about a
similar bug and took a look. The fix was easy, so it made it into R14.0.5
just passed the very last minute (we had frozen R14.0.5 yesterday but
allowed an exception for this patch). Will this patch be in TDE preliminary stable
builds (R14.0.5) soon or do
I have to wait for the official release?
Yes, it will be in PSB as well. Nevertheless it may take a bit longer than
usual for the new packages to appear online, since now pre-build process of
R14.0.5 has started on Slavek's servers.
2101
days inactive
2129
days old
12 comments
5 participants
participants (5)
-
Curt Howland -
Dr. Nikolaus Klepp -
Michele Calgaro -
Stefan Krusche -
Thierry de Coulon