1 Dec
2018
1 Dec
'18
7:43 a.m.
Hi again.
Did Nik mean chmod o+w or chmod a+w? I looked to the manpage, a+w is
writeable for everyone. It can solve the message "failed to open
'/etc/tqt3/tqt_plugins_3.5rc.tmp'". But I learned that user shouldnt
write in /etc/... folder.
When I made chmod a+w /etc/tqt3 does it affect on /etc or only in
/etc/tqt3? I dont want to destroy my system. :/
For the new readers, this is my problem:
I have ubuntu 18.4 with trinity R14.0.5. If I want to start the arduino
ide from arduino.cc (download and extract arduino-1.8.7-linux64.tar.xz)
there comes the splash-screen for one second and it crashes with this
message:
~/arduino-1.8.7$ ./arduino
Picked up JAVA_TOOL_OPTIONS:
TQSettings::sync: failed to open '/etc/tqt3/tqt_plugins_3.5rc.tmp' for
writing
What I have to install or change?
I logged in today with the ubuntu standard desktop and the arduino ide
works great.
deloptes points in devel to $CLASSPATH, the var in empty in my shell.
./arduino is a bash script.
Thanks for the help.
On 30.11.18 21:21, deloptes wrote:
Dr. Nikolaus Klepp wrote:
trinity-devel-unsubscribe(a)lists.pearsoncomputing.net
Hi!
I have 14.0.6~pre + openjdk-8-jre-headless + arduino 1.8.3. I remember
that I once saw the error you described, but that's been quite a while.
You might try "chown a+w " as a last resort :-/
but this has nothing to do with OPs problem and it is a bad idea to give
permission to everybody to write in /etc (you mean chmod o+w).
---------------------------------------------------------------------
To unsubscribe, e-mail: For additional commands, e-mail:
trinity-devel-help(a)lists.pearsoncomputing.net
Read list messages on the web archive:
http://trinity-devel.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
1 Dec
1 Dec
8:08 a.m.
MLR wrote:
deloptes points in devel to $CLASSPATH, the var in
empty in my shell.
./arduino is a bash script.
Because it pissed me I downloaded the tool and ran the install script.
After this I typed ./arduino and the gui started.
Looking into the install script it might be that it creates links in your
current environment, so I sugggest
1. login in default ubuntu
2. run uninstall.sh
3. login in TDE
4. run install.sh
5. ./arduino
6. it should work
regards
9:27 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hi,
Thanks for the help. The error is the same:
TQSettings::sync: failed to open '/etc/tqt3/tqt_plugins_3.5rc.tmp' for
writing
Strange thing, I use arduino since many years. It works always without
the install.sh script.
I solved the problem with 'sudo chmod a+w /etc/tqt3', it starts. But I
am not happy with it.
Best regards
On 01.12.18 09:08, deloptes wrote:
MLR wrote:
deloptes points in devel to $CLASSPATH, the var
in empty in my shell.
./arduino is a bash script.
Because it pissed me I downloaded the tool and ran the install script.
After this I typed ./arduino and the gui started.
Looking into the install script it might be that it creates links in your
current environment, so I sugggest
1. login in default ubuntu
2. run uninstall.sh
3. login in TDE
4. run install.sh
5. ./arduino
6. it should work
regards
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
9:46 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hi!
Am Samstag, 1. Dezember 2018 schrieb MLR:
Hi,
Thanks for the help. The error is the same:
TQSettings::sync: failed to open '/etc/tqt3/tqt_plugins_3.5rc.tmp' for
writing
Strange thing, I use arduino since many years. It works always without
the install.sh script.
I solved the problem with 'sudo chmod a+w /etc/tqt3', it starts. But I
am not happy with it.
Sure that is not the best solution, but it get's things done. I remember that I had
this problem quite some time ago. It was solved in later versions of TDE, so you might
want to use the Slavecs "bleeding edge" repository.
Maybe this could also work - leaves just one file for your user r/w in /etc/tqt3:
$ touch /etc/tqt3/tqt_plugins_3.5rc.tmp
$ sudo chmod 0755 /etc/tqt3
$ arduino
Nik
Best regards
On 01.12.18 09:08, deloptes wrote:
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
MLR wrote:
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
deloptes points in devel to $CLASSPATH, the var
in empty in my shell.
./arduino is a bash script.
Because it pissed me I downloaded the tool and ran the install script.
After this I typed ./arduino and the gui started.
Looking into the install script it might be that it creates links in your
current environment, so I sugggest
1. login in default ubuntu
2. run uninstall.sh
3. login in TDE
4. run install.sh
5. ./arduino
6. it should work
regards
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
10:33 a.m.
MLR wrote:
TQSettings::sync: failed to open
'/etc/tqt3/tqt_plugins_3.5rc.tmp' for
writing
Strange thing, I use arduino since many years. It works always without
the install.sh script.
I solved the problem with 'sudo chmod a+w /etc/tqt3', it starts. But I
am not happy with it.
I can not reproduce this. Here it runs smooth
regards
11:01 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
On Saturday 01 of December 2018 10:27:43 MLR wrote:
Hi,
Thanks for the help. The error is the same:
TQSettings::sync: failed to open '/etc/tqt3/tqt_plugins_3.5rc.tmp' for
writing
Strange thing, I use arduino since many years. It works always without
the install.sh script.
I solved the problem with 'sudo chmod a+w /etc/tqt3', it starts. But I
am not happy with it.
Best regards
Hi MLR,
the problem with start arduino ide is definitely not caused by writing
to /etc/tqt3/tqt_plugins_3.5rc.tmp. This message only diverts attention
from the real problem. Please do:
1. apt-get purge kgtk-qt3-trinity
2. log out from TDE
3. log in again to TDE
4. try to run arduino ide
Cheers
--
Slávek
2 Dec
2 Dec
7:38 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hello Slávek,
the package kgtk-qt3-trinity is not installed.
Have a nice day
On 01.12.18 12:01, Slávek Banko wrote:
Hi MLR,
the problem with start arduino ide is definitely not caused by writing
to /etc/tqt3/tqt_plugins_3.5rc.tmp. This message only diverts attention
from the real problem. Please do:
1. apt-get purge kgtk-qt3-trinity
2. log out from TDE
3. log in again to TDE
4. try to run arduino ide
Cheers
7:41 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hello Nik,
another error: "TQSettings::sync: error writing file
'/etc/tqt3/tqt_plugins_3.5rc'".
I set it again to "chmod a+w /etc/tqt3" and see what happend in the
furure. :/
Best regards
On 01.12.18 10:46, Dr. Nikolaus Klepp wrote:
Hi!
Am Samstag, 1. Dezember 2018 schrieb MLR:
Hi,
Thanks for the help. The error is the same:
TQSettings::sync: failed to open '/etc/tqt3/tqt_plugins_3.5rc.tmp' for
writing
Strange thing, I use arduino since many years. It works always without
the install.sh script.
I solved the problem with 'sudo chmod a+w /etc/tqt3', it starts. But I
am not happy with it.
Sure that is not the best solution, but it get's things
done. I remember that I had this problem quite some time ago. It was solved in later
versions of TDE, so you might want to use the Slavecs "bleeding edge"
repository.
Maybe this could also work - leaves just one file for your user r/w in /etc/tqt3:
$ touch /etc/tqt3/tqt_plugins_3.5rc.tmp
$ sudo chmod 0755 /etc/tqt3
$ arduino
Nik
Best regards
On 01.12.18 09:08, deloptes wrote:
MLR wrote:
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
deloptes points in devel to $CLASSPATH, the var
in empty in my shell.
./arduino is a bash script.
Because it pissed me I downloaded the tool and ran the install script.
After this I typed ./arduino and the gui started.
Looking into the install script it might be that it creates links in your
current environment, so I sugggest
1. login in default ubuntu
2. run uninstall.sh
3. login in TDE
4. run install.sh
5. ./arduino
6. it should work
regards
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
9:12 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Am Sonntag, 2. Dezember 2018 schrieb MLR:
Hello Nik,
another error: "TQSettings::sync: error writing file
'/etc/tqt3/tqt_plugins_3.5rc'".
I set it again to "chmod a+w /etc/tqt3" and see what happend in the
furure. :/
Best regards
Interesting. Which version of TDE is installed?
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
10:58 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hi again Nik,
I have R14.0.5 the latest stable. Is it possible to install the latest
unstable to test and switch back after that? I am afraid that config
files will become unusable for the stable as result.
Best regards
On 02.12.18 10:12, Dr. Nikolaus Klepp wrote:
Am Sonntag, 2. Dezember 2018 schrieb MLR:
Hello Nik,
another error: "TQSettings::sync: error writing file
'/etc/tqt3/tqt_plugins_3.5rc'".
I set it again to "chmod a+w /etc/tqt3" and see what happend in the
furure. :/
Best regards
Interesting. Which version of TDE is installed?
11:18 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Am Sonntag, 2. Dezember 2018 schrieb MLR:
Hi again Nik,
I have R14.0.5 the latest stable. Is it possible to install the latest
unstable to test and switch back after that? I am afraid that config
files will become unusable for the stable as result.
I would be quite surprised if any config file changes in a incompatible way - but I have
never moved back to stable. To be sure copy your ~/.trinity to ~/_trinity-save.
Best regards
On 02.12.18 10:12, Dr. Nikolaus Klepp wrote:
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
Am Sonntag, 2. Dezember 2018 schrieb MLR:
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
Hello Nik,
another error: "TQSettings::sync: error writing file
'/etc/tqt3/tqt_plugins_3.5rc'".
I set it again to "chmod a+w /etc/tqt3" and see what happend in the
furure. :/
Best regards
Interesting. Which version of TDE is installed?
5:28 p.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hi MLR,
well, if kgtk-qt3-trinity is not installed, here is another potential
source of problems: gtk-qt-engine-trinity and gtk3-tqt-engine-trinity. In
Trinity Control Center, check the GTK engine setting and set it to
another engine, than QT-Engine and TQT-Engine.
Cheers
--
Slávek
On Sunday 02 of December 2018 08:38:04 MLR wrote:
Hello Slávek,
the package kgtk-qt3-trinity is not installed.
Have a nice day
On 01.12.18 12:01, Slávek Banko wrote:
Hi MLR,
the problem with start arduino ide is definitely not caused by
writing to /etc/tqt3/tqt_plugins_3.5rc.tmp. This message only diverts
attention from the real problem. Please do:
1. apt-get purge kgtk-qt3-trinity
2. log out from TDE
3. log in again to TDE
4. try to run arduino ide
Cheers
6:50 p.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
said Slávek Banko:
| well, if kgtk-qt3-trinity is not installed, here is another potential
| source of problems: gtk-qt-engine-trinity and gtk3-tqt-engine-trinity.
| In Trinity Control Center, check the GTK engine setting and set it to
| another engine, than QT-Engine and TQT-Engine.
where in trinity control center is this located? i ask not because of the
original poster's problem but for another issue: after having worked for
years, my flatbed scanner, using epson's iscan software, doesn't work
anymore. starting it from a terminal to catch the errors, i get this:
[kcrash] TDECrash: Application 'iscan-gtk-tqt-application' crashing...
the backtrace renders this:
iscan-gtk-tqt-application: No such file or directory.
as well as pages of other things about the machine and what's installed.
i've never heard of iscan-gtk-tqt-application before.
--
dep
Sent with ProtonMail Secure Email. Because privacy matters.
7:20 p.m.
New subject: Scanner Problems
On Sunday 02 December 2018, dep wrote:
said Slávek Banko:
| well, if kgtk-qt3-trinity is not installed, here is another potential
| source of problems: gtk-qt-engine-trinity and gtk3-tqt-engine-trinity.
| In Trinity Control Center, check the GTK engine setting and set it to
| another engine, than QT-Engine and TQT-Engine.
where in trinity control center is this located? i ask not because of the
original poster's problem but for another issue: after having worked for
years, my flatbed scanner, using epson's iscan software, doesn't work
anymore. starting it from a terminal to catch the errors, i get this:
[kcrash] TDECrash: Application 'iscan-gtk-tqt-application' crashing...
the backtrace renders this:
iscan-gtk-tqt-application: No such file or directory.
as well as pages of other things about the machine and what's installed.
i've never heard of iscan-gtk-tqt-application before.
Hi Dep
Try grabbing the firmware binary from the windows drivers and have it load
when you call the scanner.
You will have to check out some howtos to get it right.
This is assuming it's a firmware loading problem like mine was.
Find the conf file for your scanner and add something like
# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
Userful Sites:
https://everythinglinux.org/scanner/index.html
http://manpages.ubuntu.com/manpages/trusty/man5/sane-epson2.5.html
http://ljm.home.xs4all.nl/SANE-faq.html
8:10 p.m.
New subject: [trinity-users] Scanner Problems
said Kate Draven:
| Try grabbing the firmware binary from the windows drivers and have it
| load when you call the scanner.
|
| You will have to check out some howtos to get it right.
| This is assuming it's a firmware loading problem like mine was.
|
| Find the conf file for your scanner and add something like
|
| # Path to the firmware file
| # This file comes with the Windows driver
| # The scanner won't work without it
| option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
|
| Userful Sites:
| https://everythinglinux.org/scanner/index.html
| http://manpages.ubuntu.com/manpages/trusty/man5/sane-epson2.5.html
| http://ljm.home.xs4all.nl/SANE-faq.html
Thanks very much -- I'll do this if I can't get the native software to
work. What puzzles me about it is that the Epson-provided Linux IScan
application has always worked reliably here, and only now when I invoke it
does it explode.
--
dep
Sent with ProtonMail Secure Email. Because privacy matters.
10:28 p.m.
dep wrote:
where in trinity control center is this located? i ask
not because of the
original poster's problem but for another issue: after having worked for
years, my flatbed scanner, using epson's iscan software, doesn't work
anymore. starting it from a terminal to catch the errors, i get this:
[kcrash] TDECrash: Application 'iscan-gtk-tqt-application' crashing...
the backtrace renders this:
iscan-gtk-tqt-application: No such file or directory.
as well as pages of other things about the machine and what's installed.
i've never heard of iscan-gtk-tqt-application before.
Hi,
can you please not hijack others threads?!
Which iscan version are you using? I had to patch iscan-2.30.3 in order to
work on stretch. I can post you a link to the package(s)
regards
10:56 p.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
On Sunday 02 of December 2018 19:50:07 dep wrote:
said Slávek Banko:
| well, if kgtk-qt3-trinity is not installed, here is another potential
| source of problems: gtk-qt-engine-trinity and
| gtk3-tqt-engine-trinity. In Trinity Control Center, check the GTK
| engine setting and set it to another engine, than QT-Engine and
| TQT-Engine.
where in trinity control center is this located? i ask not because of
the original poster's problem but for another issue: after having
worked for years, my flatbed scanner, using epson's iscan software,
doesn't work anymore. starting it from a terminal to catch the errors,
i get this:
[kcrash] TDECrash: Application 'iscan-gtk-tqt-application' crashing...
the backtrace renders this:
iscan-gtk-tqt-application: No such file or directory.
as well as pages of other things about the machine and what's
installed. i've never heard of iscan-gtk-tqt-application before.
Trinity Control Center => Appearance & Themes => GTK Styles and Fonts.
Cheers
--
Slávek
3 Dec
3 Dec
12:17 a.m.
New subject: [trinity-users] iscan
said deloptes:
| can you please not hijack others threads?!
inasmuch as there was a tqt issue in the original post, i had no reason to
suppose that this was not pertinent to the original discussion. but thanks
anyway for the scolding, which like java you seem to do on many
platforms.<g>
| Which iscan version are you using? I had to patch iscan-2.30.3 in order
| to work on stretch. I can post you a link to the package(s)
2.30.1-1 for amd64. the link would be appreciated
--
dep
Sent with ProtonMail Secure Email. Because privacy matters.
6:51 p.m.
New subject: iscan
dep wrote:
the link would be appreciated
http://deloptes.no-ip.org/iscan_2.30.3-1debian9.0.5+eko3_amd64.deb
http://deloptes.no-ip.org/iscan-data_1.39.0-1debian9.0.5+eko3_all.deb
http://deloptes.no-ip.org/iscan-dbgsym_2.30.3-1debian9.0.5+eko3_amd64.deb
md5sum
63c7eb31bb08e2c58d039cdace51c403 iscan_2.30.3-1debian9.0.5+eko3_amd64.deb
0518445829560fc4d671e488ee1e3803
iscan-data_1.39.0-1debian9.0.5+eko3_all.deb
c6e8a70e32367e7697893a287cef236c
iscan-dbgsym_2.30.3-1debian9.0.5+eko3_amd64.deb
you have to download and install with dpkg -i (it is not a repository)
The patch (attached) I applied AFAIR on 2.30.1.
regards
9:10 p.m.
New subject: [trinity-users] Re: iscan
said deloptes:
| http://deloptes.no-ip.org/iscan_2.30.3-1debian9.0.5+eko3_amd64.deb
| http://deloptes.no-ip.org/iscan-data_1.39.0-1debian9.0.5+eko3_all.deb
| http://deloptes.no-ip.org/iscan-dbgsym_2.30.3-1debian9.0.5+eko3_amd64.de
|b
Thanks very much.
--
dep
Sent with ProtonMail Secure Email. Because privacy matters.
8:30 p.m.
New subject: [trinity-users] Re: Re: iscan
said deloptes:
| dep wrote:
| > Thanks very much
|
| Did it work? Just curious.
Haven't had a chance to try it -- up to my eyebrows this week with other
work; the project that required the scanner is on hold for the weekend.
--
dep
Sent with ProtonMail Secure Email. Because privacy matters.
8:37 p.m.
New subject: [trinity-users] Re: Re: iscan
said deloptes:
| dep wrote:
| > Thanks very much
|
| Did it work? Just curious.
decided to take a break and install it and see if it helped. it didn't:
[kcrash] TDECrash: Application 'iscan-gtk-tqt-application' crashing...
no further details.
--
dep
Sent with ProtonMail Secure Email. Because privacy matters.
5 Dec
5 Dec
11:17 p.m.
New subject: iscan
dep wrote:
decided to take a break and install it and see if it
helped. it didn't:
[kcrash] TDECrash: Application 'iscan-gtk-tqt-application' crashing...
no further details.
very strange it works here.
when you have time look at what Slavek wrote
well, if kgtk-qt3-trinity is not installed, here is another potential
source of problems: gtk-qt-engine-trinity and gtk3-tqt-engine-trinity. In
Trinity Control Center, check the GTK engine setting and set it to
another engine, than QT-Engine and TQT-Engine.
regards
6 Apr
6 Apr
6:01 a.m.
New subject: [trinity-users] Re: Problem with starting arduino ide (from devel to user)
Hi Nik,
I didn't test it, it's too dangerous. I am using Arduino in a VM since
then :/.
Best regards
On 02.12.18 12:18, Dr. Nikolaus Klepp wrote:
Am Sonntag, 2. Dezember 2018 schrieb MLR:
Hi again Nik,
I have R14.0.5 the latest stable. Is it possible to install the latest
unstable to test and switch back after that? I am afraid that config
files will become unusable for the stable as result.
I would be quite surprised if
any config file changes in a incompatible way - but I have never moved back to stable. To
be sure copy your ~/.trinity to ~/_trinity-save.
Best regards
On 02.12.18 10:12, Dr. Nikolaus Klepp wrote:
Am Sonntag, 2. Dezember 2018 schrieb MLR:
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
Hello Nik,
another error: "TQSettings::sync: error writing file
'/etc/tqt3/tqt_plugins_3.5rc'".
I set it again to "chmod a+w /etc/tqt3" and see what happend in the
furure. :/
Best regards
Interesting. Which version of TDE is installed?
1841
days inactive
1967
days old
24 comments
6 participants
participants (6)
-
deloptes -
dep -
Dr. Nikolaus Klepp -
Kate Draven -
MLR -
Slávek Banko