tde-devels

devels@trinitydesktop.org

3 participants
3808 discussions

applications/amarok CMake fails to find konqsidebarplugin.h?
by David C. Rankin 14 Mar '12

14 Mar '12

Tim, Darrell, amarok fails to find konqsidebarplugin.h even though it is installed? Eg: -- Performing Test HAVE_QGLWIDGET - Failed -- Performing Test HAVE_KONQSIDEBARPLUGIN_H WARNING: Target "cmTryCompileExec" requests linking to directory "/opt/tqt3/lib". Targets may link only to libraries. CMake is dropping the item. -- Performing Test HAVE_KONQSIDEBARPLUGIN_H - Failed CMake Error at cmake/modules/TDEMacros.cmake:23 (message): ################################################# konqsidebarplugin.h are requested, but not found on your system ################################################# Call Stack (most recent call first): ConfigureChecks.cmake:191 (tde_message_fatal) CMakeLists.txt:67 (include) -- Configuring incomplete, errors occurred! I have it: 23:31 nirvana:~/tde/bld/libkarma> find $CHROOT/david/opt -name konqsidebarplugin.h /mnt/nv1/home/chroot/david/opt/trinity/include/konqsidebarplugin.h Hmm, what's the trick? -- David C. Rankin, J.D.,P.E.

2 3

cmake debug help - amarok
by David C. Rankin 14 Mar '12

14 Mar '12

All, In the following code from amarok/ConfigureChecks.cmake: # konqsidebarplugin.h if( WITH_KONQSIDEBAR ) tde_save( CMAKE_REQUIRED_DEFINITIONS CMAKE_REQUIRED_FLAGS CMAKE_REQUIRED_INCLUDES CMAKE_REQUIRED_LIBRARIES ) set( CMAKE_REQUIRED_DEFINITIONS ${TQT_CFLAGS_OTHER} ) set( CMAKE_REQUIRED_INCLUDES ${TDE_INCLUDE_DIR};${TQT_INCLUDE_DIRS};${CMAKE_INCLUDE_PATH} ) set( CMAKE_REQUIRED_FLAGS "-include tqt.h" ) set( CMAKE_REQUIRED_LIBRARIES -L${TQT_LIBRARY_DIRS} ${TQT_LIBRARIES} ) check_cxx_source_compiles(" #include <konqsidebarplugin.h> int main(int, char**) { return 0; } " HAVE_KONQSIDEBARPLUGIN_H ) tde_restore( CMAKE_REQUIRED_DEFINITIONS CMAKE_REQUIRED_FLAGS CMAKE_REQUIRED_INCLUDES CMAKE_REQUIRED_LIBRARIES ) if( NOT HAVE_KONQSIDEBARPLUGIN_H ) tde_message_fatal( "konqsidebarplugin.h are requested, but not found on your system" ) endif( ) endif( ) What is this code checking? check_cxx_source_compiles(" #include <konqsidebarplugin.h> int main(int, char**) { return 0; } " HAVE_KONQSIDEBARPLUGIN_H ) I can find the '#include <konqsidebarplugin.h>' bit in: amarok/src/konquisidebar/universalamarok.h, but what does the rest of the check_cxx_source_compiles look for? 'int main(int, char**) { return 0; }' isn't in the code: /chroot/david/build/src/amarok> grep -r 'int main(int, char\*\*)' * ConfigureChecks.cmake: int main(int, char**) { (void)new QGLWidget((QWidget*)0, \"qgl\"); return 0; } " ConfigureChecks.cmake: int main(int, char**) { return 0; } " It's nowhere else in the amarok code -- this is what is causing the konqsidebarplugin cmake failure. I can't explain why it isn't seen on Darrell's build -- we should have the same amarok code... That's why I need help understanding exactly what this check_cxx_source_compiles code is looking for. -- David C. Rankin, J.D.,P.E.

2 1

amarok - Almost build error at 70% xine... invalid conversion from 'const char* const*' to 'char**'
by David C. Rankin 14 Mar '12

14 Mar '12

Tim, Darrell, Looks like there is a conversion error in the amarok code: [ 70%] Building CXX object amarok/src/engine/xine/CMakeFiles/libamarok_xine-engine-module.dir/xinecfg.cpp.o cd /build/src/build/amarok/src/engine/xine && /usr/bin/c++ -Dlibamarok_xine_engine_module_EXPORTS -DHAVE_CONFIG_H -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DQT_NO_ASCII_CAST -DQT_CLEAN_NAMESPACE -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_THREAD_SUPPORT -D_REENTRANT -include tqt.h -fPIC -I/build/src/build/amarok/src/engine/xine -I/build/src/build -I/build/src/build/amarok/src/amarokcore -I/build/src/amarok/amarok/src -I/build/src/amarok/amarok/src/amarokcore -I/opt/trinity/include -I/opt/tqt3/include -I/opt/trinity/include/tqt -o CMakeFiles/libamarok_xine-engine-module.dir/xinecfg.cpp.o -c /build/src/build/amarok/src/engine/xine/xinecfg.cpp /usr/bin/cmake -E cmake_progress_report /build/src/build/CMakeFiles [ 70%] Building CXX object amarok/src/engine/xine/CMakeFiles/libamarok_xine-engine-module.dir/xine-engine.cpp.o cd /build/src/build/amarok/src/engine/xine && /usr/bin/c++ -Dlibamarok_xine_engine_module_EXPORTS -DHAVE_CONFIG_H -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DQT_NO_ASCII_CAST -DQT_CLEAN_NAMESPACE -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_THREAD_SUPPORT -D_REENTRANT -include tqt.h -fPIC -I/build/src/build/amarok/src/engine/xine -I/build/src/build -I/build/src/build/amarok/src/amarokcore -I/build/src/amarok/amarok/src -I/build/src/amarok/amarok/src/amarokcore -I/opt/trinity/include -I/opt/tqt3/include -I/opt/trinity/include/tqt -o CMakeFiles/libamarok_xine-engine-module.dir/xine-engine.cpp.o -c /build/src/amarok/amarok/src/engine/xine/xine-engine.cpp /build/src/amarok/amarok/src/engine/xine/xine-engine.cpp: In static member function 'static void XineEngine::XineEventListener(void*, const xine_event_t*)': /build/src/amarok/amarok/src/engine/xine/xine-engine.cpp:940:85: warning: 'xine_mrl_reference_data_t' is deprecated (declared at /usr/include/xine.h:1985) [-Wdeprecated-declarations] /build/src/amarok/amarok/src/engine/xine/xine-engine.cpp: In member function 'virtual bool XineEngine::getAudioCDContents(const TQString&, KURL::List&)': /build/src/amarok/amarok/src/engine/xine/xine-engine.cpp:1151:58: error: invalid conversion from 'const char* const*' to 'char**' [-fpermissive] make[2]: *** [amarok/src/engine/xine/CMakeFiles/libamarok_xine-engine-module.dir/xine-engine.cpp.o] Error 1 make[2]: Leaving directory `/build/src/build' make[1]: *** [amarok/src/engine/xine/CMakeFiles/libamarok_xine-engine-module.dir/all] Error 2 make[1]: Leaving directory `/build/src/build' make: *** [all] Error 2 I'm not sure what to do with this one. Is this an amarok error or xine? -- David C. Rankin, J.D.,P.E.

4 6

Latest Build - ALL window decoration GONE / now tde won't start??
by David C. Rankin 14 Mar '12

14 Mar '12

Tim, After rebuilding late last night, I am checking packages today. I reinstalled all tde packages on my test maching and started tde. I noticed 2 things immediately: (1) there was only a black screen displayed behind the ksplash startup screen, not the background set in kcontol -> Login Manager; and (2) ALL WINDOW DECORATION IS GONE - poof - missing?? Here is a screenshot of the tips dialog: http://nirvana.3111skyline.com/dl/dt/trinity/ss/tde-no-decor.jpg I went to kcontrol -> appearance -> window decoration and all window decorations are listed as being available, but selecting one and hitting 'Apply" has no effect. No window decorations appear. I'm not sure where to begin troubleshooting this one. No .xsession-errors was ever created. IIRC, this is a tdelibs issue However, that is SMALL POTATOES - not starttrinity - doesn't start trinity :) The splash screen gets to the 'hard drive icon' (Initializing system services) chugs away for a while and then tde commands an xserver shutdown. Looking at the first shutdown, there was a complaint about no xset, xsetroot, and xprop. Here is the screenshot: http://nirvana.3111skyline.com/dl/dt/trinity/ss/tde-starttrinity-crash.jpg So I installed xorg-xset, xorg-xsetroot and xorg-xprop (funny, it ran fine before without them). I then tried starttrinity again, and it failed with the same behavior. (However, this time I did get a blue background color behind the ksplash dialog on statup) It got stuck on "Initializing system services" and then crashed: http://nirvana.3111skyline.com/dl/dt/trinity/ss/tde-starttrinity-crash1.jpg The main issue I see is the dcopserver already running error - but looking at /home/david -- there is no .DCOPserver_tdepv__0 file. So I don't know what the heck is going on. I'm pretty much stuck on this one. Is there some change over the past few days that could explain this behavior?? Is it a change in ksyscoca or something similar causing the read of the old sysconfig cache to cause the crash? I tried deleting /var/tmp/kdecache-david and it did not help. Anybody else seeing this with last night's builds? How to debug and get more info?? -- David C. Rankin, J.D.,P.E.

3 13

applications/knetworkmanager8 Build Failure - error: 'QCString' was not declared in this scope
by David C. Rankin 14 Mar '12

14 Mar '12

Tim, Here is another QCString build failure. Let me know if you want a bug filed or if you just want to work it from the list. Thanks. Here is the actual error: [ 75%] Building CXX object knetworkmanager-0.8/src/CMakeFiles/tdeinit_knetworkmanager-shared.dir/knetworkmanager-wireless_menuitem.cpp.o cd /build/src/build/knetworkmanager-0.8/src && /usr/bin/c++ -Dtdeinit_knetworkmanager_shared_EXPORTS -DHAVE_CONFIG_H -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DQT_NO_ASCII_CAST -DQT_CLEAN_NAMESPACE -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_THREAD_SUPPORT -D_REENTRANT -include tqt.h -fPIC -I/build/src/build/knetworkmanager-0.8/src -I/build/src/build -I/opt/trinity/include -I/opt/tqt3/include -I/opt/trinity/include/tqt -I/opt/trinity/include/dbus-1-tqt -I/usr/include/NetworkManager -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -UQT_NO_ASCII_CAST -o CMakeFiles/tdeinit_knetworkmanager-shared.dir/knetworkmanager-wireless_menuitem.cpp.o -c /build/src/knetworkmanager8/knetworkmanager-0.8/src/knetworkmanager-wireless_menuitem.cpp /build/src/knetworkmanager8/knetworkmanager-0.8/src/knetworkmanager-wireless_menuitem.cpp: In member function 'void WirelessNetworkItem::slotActivate()': /build/src/knetworkmanager8/knetworkmanager-0.8/src/knetworkmanager-wireless_menuitem.cpp:77:160: error: 'QCString' was not declared in this scope make[2]: *** [knetworkmanager-0.8/src/CMakeFiles/tdeinit_knetworkmanager-shared.dir/knetworkmanager-wireless_menuitem.cpp.o] Error 1 make[2]: Leaving directory `/build/src/build' make[1]: *** [knetworkmanager-0.8/src/CMakeFiles/tdeinit_knetworkmanager-shared.dir/all] Error 2 make[1]: Leaving directory `/build/src/build' make: *** [all] Error 2 -- David C. Rankin, J.D.,P.E.

2 3

applications/knetworkmanager9 CMake Failure - add_subdirectory given source "knetworkmanager-0.8" not existing..
by David C. Rankin 13 Mar '12

13 Mar '12

Tim, Serghei, I tried to build knetworkmanager9 and it looks like the CMakeLists.txt still points to the knetworkmanager-0.8 directory which isn't found in the 9 source. The error was: CMake Error at CMakeLists.txt:66 (add_subdirectory): add_subdirectory given source "knetworkmanager-0.8" which is not an existing directory. -- David C. Rankin, J.D.,P.E.

2 1

applications/kbfx CMake failure - Unknown CMake command "ADD_POFILES"
by David C. Rankin 13 Mar '12

13 Mar '12

Tim, Serghei, Just going through the applications directory attempting to build everything that has a CMake setup included. kbfx isn't building. It is a TDE cmake file, so it's not one of the strays. The error I get is: -- Will use 'kmenuedit'! CMake Error at po/CMakeLists.txt:1 (ADD_POFILES): Unknown CMake command "ADD_POFILES". What's the trick here? -- David C. Rankin, J.D.,P.E.

1 0

Graphics help
by Darrell Anderson 13 Mar '12

13 Mar '12

To anybody interested the following image needs updating (KDE -> TDE): tdebase/kdesktop/pics/splash.png Thanks. Darrell

2 3

CMake Failure - tdesdk: svn_client-1 library was not found on your system
by David C. Rankin 12 Mar '12

12 Mar '12

Tim, Serghei, tdesdk will not complete CMake configure due to a failure to fine svn_client-1 even though subversion is installed and the libsvn_client-1 library is in /usr/lib. The error received is: -- Looking for svn_pool_create_ex in svn_client-1 -- Looking for svn_pool_create_ex in svn_client-1 - not found CMake Error at cmake/modules/TDEMacros.cmake:23 (message): ################################################# svn_client-1 library was not found on your system. Subversion is installed? Try to set SVN_LIBRARY_DIR to subversion library directory. ################################################# Call Stack (most recent call first): kioslave/svn/ConfigureChecks.cmake:27 (tde_message_fatal) kioslave/svn/CMakeLists.txt:12 (include) -- Configuring incomplete, errors occurred! I'm not sure what this error is looking for?? I set SVN_LIBRARY_DIR=/usr/lib, but it made no difference: msg "Starting cmake..." cmake ${srcdir}/${pkgname#*-} \ -DCMAKE_VERBOSE_MAKEFILE=ON \ -DCMAKE_INSTALL_PREFIX=${TDEDIR} \ -DWITH_DBSEARCHENGINE=ON \ -DSVN_LIBRARY_DIR=/usr/lib \ -DWITH_KCAL=ON \ -DBUILD_ALL=ON What say the experts? -- David C. Rankin, J.D.,P.E.

2 1

Does tdepim build with kerberos support?
by Darrell Anderson 11 Mar '12

11 Mar '12

If yes then how to tell? There is nothing in the build log such as -I/usr/kerberos/include. I have krb5 installed. I'm not seeing anything obvious in the cmake files. Darrell

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

tde-devels