31 May
2018
31 May
'18
6:36 p.m.
On Thursday 31 of May 2018 20:22:36 Mike Bird wrote:
On Thu May 31 2018 10:36:06 Slávek Banko wrote:
Hi Mike,
I watched your activity on cgit during my test with Gitea :)
You can try the same cloning using Gitea's url.
If you want to test line speed without affecting by the application server
(either cgit or Gitea), you can download the iso for Slax with Trinity:
http://mirror.ppa.trinitydesktop.org/trinity-sb/cdimages/slax/
Cheers
--
Slávek
this is strange behavior. VPS for hosting
mirror.git.trinitydesktop.org is on a 300 Mbps bandwidth. Therefore,
I do not suppose there should be a problem with the speed of this
server.
Hi Slávek,
I just ran git clone https://mirror.git.trinitydesktop.org/cgit/tde for
a few minutes on three VPSs in data centers in Texas, California, and
Washington State. In each case there was a high initial transfer rate
around 35Mbps. After less than a minute transfer rate dropped
drastically or even zeroed before bouncing around and finally settling
near 200kbps.
When I tested transfers from Washington State to Texas I was able to
sustain around 47Mbps. Transfers from the TDE UK mirror to Texas
started around 170Mbps before bouncing around wildly but averaged
90Mbps over several minutes.
I doubt this is an artifact of disk caching. I suspect something is
limiting mirror.git.trinitydesktop.org bandwidth despite the 300Mbps
connection.
--Mike