Error - artsmessage: Sound server fatal error: cpu overload, aborting
This message pops up on session login, and repeats if dismissed. How can I make it go away and stay away? Lots of noise in .xsession-errors too! :(
# pinxi -ASaz --vs --zl --hostname pinxi 3.3.26-19 (2023-04-24) System: Host: gb250 Kernel: 6.2.12-1-default arch: x86_64 bits: 64 compiler: gcc v: 13.0.1 parameters: BOOT_IMAGE=/boot/vmlinuz root=LABEL=<filter> rd.hostonly=0 noresume ipv6.disable=1 net.ifnames=0 mitigations=none preempt=full video=1440x900@60 Desktop: Trinity v: R14.0.13 tk: Qt v: 3.5.0 info: kicker wm: Twin v: 3.0 vt: 7 dm: 1: TDM 2: XDM Distro: openSUSE Tumbleweed 20230424 Audio: Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403 API: ALSA v: k6.2.12-1-default status: kernel-api tools: alsactl,alsamixer,amixer Server-1: aRts v: 1.5.10 status: off with: artswrapper status: off tools: artsdsp Server-2: PipeWire v: 0.3.69 status: active with: 1: pipewire-pulse status: off 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl # aplay /usr/share/sounds/alsa/test.wav # analog OK, but TDE artsmessage "cpu overload" Playing WAVE '/usr/share/sounds/alsa/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo # rpm -qa | grep -E 'alsa|arts|gstr|jack|mix|pavu|puls|wire' | sort alsa-1.2.8-1.2.x86_64 alsa-ucm-conf-1.2.8-1.2.noarch alsa-utils-1.2.8-1.2.x86_64 gstreamer-1.22.2-1.1.x86_64 gstreamer-plugins-base-1.22.2-1.1.x86_64 kpipewire-imports-5.27.4-1.1.x86_64 kquickcharts-5.105.0-1.1.x86_64 libgstreamer-1_0-0-1.22.2-1.1.x86_64 libgstriff-1_0-0-1.22.2-1.1.x86_64 libjack0-1.9.21-1.5.x86_64 libKF5Parts5-5.105.0-1.1.x86_64 libpipewire-0_3-0-0.3.69-2.1.x86_64 libpulse-mainloop-glib0-16.1-3.1.x86_64 libpulse0-16.1-3.1.x86_64 libwireplumber-0_4-0-0.4.14-1.1.x86_64 pipewire-0.3.69-2.1.x86_64 pipewire-alsa-0.3.69-2.1.x86_64 pipewire-modules-0_3-0.3.69-2.1.x86_64 pipewire-pulseaudio-0.3.69-2.1.x86_64 pipewire-spa-plugins-0_2-0.3.69-2.1.x86_64 pipewire-spa-tools-0.3.69-2.1.x86_64 pipewire-tools-0.3.69-2.1.x86_64 pulseaudio-setup-16.1-3.1.x86_64 pulseaudio-utils-16.1-3.1.x86_64 trinity-arts-1.5.10-14.0.13_1.osstw.x86_64 trinity-kmix-14.0.13-1.osstw.x86_64 trinity-libarts-akode-14.0.13-1.osstw.x86_64 trinity-libarts-audiofile-14.0.13-1.osstw.x86_64 trinity-libarts-mpeglib-14.0.13-1.osstw.x86_64 trinity-libarts-xine-14.0.13-1.osstw.x86_64 wireplumber-0.4.14-1.1.x86_64 wireplumber-audio-0.4.14-1.1.noarch # systemctl --global --user status pipewire.{service,socket} * pipewire.service - PipeWire Multimedia Service Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: disabled) Active: active (running) since Tue 2023-04-25 14:41:25 EDT; 13min ago TriggeredBy: * pipewire.socket Main PID: 1225 (pipewire) Tasks: 2 (limit: 4915) CPU: 268ms CGroup: /user.slice/user-0.slice/user@0.service/session.slice/pipewire.service `-1225 /usr/bin/pipewire
Apr 25 14:41:25 gb250 systemd[1058]: Started PipeWire Multimedia Service.
* pipewire.socket - PipeWire Multimedia System Socket Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled) Active: active (running) since Tue 2023-04-25 14:41:21 EDT; 14min ago Triggers: * pipewire.service Listen: /run/user/0/pipewire-0 (Stream) CGroup: /user.slice/user-0.slice/user@0.service/app.slice/pipewire.socket
Apr 25 14:41:21 gb250 systemd[1058]: Listening on PipeWire Multimedia System Socket. # systemctl --global --user status pipewire-pulse.{service,socket} * pipewire-pulse.service - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; disabled; preset: disabled) Active: inactive (dead) TriggeredBy: * pipewire-pulse.socket
* pipewire-pulse.socket - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled) Active: inactive (dead) Triggers: * pipewire-pulse.service Condition: start condition failed at Tue 2023-04-25 14:41:21 EDT; 14min ago `- ConditionUser=!root was not met Listen: /run/user/0/pulse/native (Stream)
Apr 25 14:41:21 gb250 systemd[1058]: PipeWire PulseAudio was skipped because of an unmet condition check (ConditionUser=!root). # systemctl --global --user status wireplumber * wireplumber.service - Multimedia Service Session Manager Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled) Active: active (running) since Tue 2023-04-25 14:41:25 EDT; 14min ago Main PID: 1236 (wireplumber) Tasks: 5 (limit: 4915) CPU: 271ms CGroup: /user.slice/user-0.slice/user@0.service/session.slice/wireplumber.service `-1236 /usr/bin/wireplumber
Apr 25 14:41:25 gb250 systemd[1058]: Started Multimedia Service Session Manager. Apr 25 14:41:26 gb250 wireplumber[1236]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner #
On Tue, 25 Apr 2023 15:07:11 -0400 Felix Miata via tde-devels devels@trinitydesktop.org wrote:
I'm not up on the intricacies of using pipewire as an audio manager, but this looks suspicious:
- pipewire-pulse.socket - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled) Active: inactive (dead) Triggers: * pipewire-pulse.service Condition: start condition failed at Tue 2023-04-25 14:41:21 EDT; 14min ago `- ConditionUser=!root was not met Listen: /run/user/0/pulse/native (Stream)
Apr 25 14:41:21 gb250 systemd[1058]: PipeWire PulseAudio was skipped because of an unmet condition check (ConditionUser=!root).
aRts has no specific support for pipewire that I'm aware of, so it probably needs the pulseaudio replacement stack to be working. Maybe troubleshoot this (with the aid of your distro, since it isn't a TDE issue) first, and see if getting that service running helps?
E. Liddell
Felix Miata composed on 2023-04-25 15:07 (UTC-0400):
Error - artsmessage: Sound server fatal error: cpu overload, aborting
This message pops up on session login, and repeats if dismissed. How can I make it go away and stay away? Lots of noise in .xsession-errors too! :(
# pinxi -ASaz --vs --zl --hostname pinxi 3.3.26-19 (2023-04-24) System: Host: gb250 Kernel: 6.2.12-1-default arch: x86_64 bits: 64 compiler: gcc v: 13.0.1 parameters: BOOT_IMAGE=/boot/vmlinuz root=LABEL=<filter> rd.hostonly=0 noresume ipv6.disable=1 net.ifnames=0 mitigations=none preempt=full video=1440x900@60 Desktop: Trinity v: R14.0.13 tk: Qt v: 3.5.0 info: kicker wm: Twin v: 3.0 vt: 7 dm: 1: TDM 2: XDM Distro: openSUSE Tumbleweed 20230424 Audio: Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403 API: ALSA v: k6.2.12-1-default status: kernel-api tools: alsactl,alsamixer,amixer Server-1: aRts v: 1.5.10 status: off with: artswrapper status: off tools: artsdsp Server-2: PipeWire v: 0.3.69 status: active with: 1: pipewire-pulse status: off 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl # aplay /usr/share/sounds/alsa/test.wav # analog OK, but TDE artsmessage "cpu overload" Playing WAVE '/usr/share/sounds/alsa/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo # rpm -qa | grep -E 'alsa|arts|gstr|jack|mix|pavu|puls|wire' | sort alsa-1.2.8-1.2.x86_64 alsa-ucm-conf-1.2.8-1.2.noarch alsa-utils-1.2.8-1.2.x86_64 gstreamer-1.22.2-1.1.x86_64 gstreamer-plugins-base-1.22.2-1.1.x86_64 kpipewire-imports-5.27.4-1.1.x86_64 kquickcharts-5.105.0-1.1.x86_64 libgstreamer-1_0-0-1.22.2-1.1.x86_64 libgstriff-1_0-0-1.22.2-1.1.x86_64 libjack0-1.9.21-1.5.x86_64 libKF5Parts5-5.105.0-1.1.x86_64 libpipewire-0_3-0-0.3.69-2.1.x86_64 libpulse-mainloop-glib0-16.1-3.1.x86_64 libpulse0-16.1-3.1.x86_64 libwireplumber-0_4-0-0.4.14-1.1.x86_64 pipewire-0.3.69-2.1.x86_64 pipewire-alsa-0.3.69-2.1.x86_64 pipewire-modules-0_3-0.3.69-2.1.x86_64 pipewire-pulseaudio-0.3.69-2.1.x86_64 pipewire-spa-plugins-0_2-0.3.69-2.1.x86_64 pipewire-spa-tools-0.3.69-2.1.x86_64 pipewire-tools-0.3.69-2.1.x86_64 pulseaudio-setup-16.1-3.1.x86_64 pulseaudio-utils-16.1-3.1.x86_64 trinity-arts-1.5.10-14.0.13_1.osstw.x86_64 trinity-kmix-14.0.13-1.osstw.x86_64 trinity-libarts-akode-14.0.13-1.osstw.x86_64 trinity-libarts-audiofile-14.0.13-1.osstw.x86_64 trinity-libarts-mpeglib-14.0.13-1.osstw.x86_64 trinity-libarts-xine-14.0.13-1.osstw.x86_64 wireplumber-0.4.14-1.1.x86_64 wireplumber-audio-0.4.14-1.1.noarch # systemctl --global --user status pipewire.{service,socket}
- pipewire.service - PipeWire Multimedia Service Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: disabled) Active: active (running) since Tue 2023-04-25 14:41:25 EDT; 13min ago
TriggeredBy: * pipewire.socket Main PID: 1225 (pipewire) Tasks: 2 (limit: 4915) CPU: 268ms CGroup: /user.slice/user-0.slice/user@0.service/session.slice/pipewire.service `-1225 /usr/bin/pipewire
Apr 25 14:41:25 gb250 systemd[1058]: Started PipeWire Multimedia Service.
- pipewire.socket - PipeWire Multimedia System Socket Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled) Active: active (running) since Tue 2023-04-25 14:41:21 EDT; 14min ago Triggers: * pipewire.service Listen: /run/user/0/pipewire-0 (Stream) CGroup: /user.slice/user-0.slice/user@0.service/app.slice/pipewire.socket
Apr 25 14:41:21 gb250 systemd[1058]: Listening on PipeWire Multimedia System Socket. # systemctl --global --user status pipewire-pulse.{service,socket}
- pipewire-pulse.service - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; disabled; preset: disabled) Active: inactive (dead)
TriggeredBy: * pipewire-pulse.socket
- pipewire-pulse.socket - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled) Active: inactive (dead) Triggers: * pipewire-pulse.service Condition: start condition failed at Tue 2023-04-25 14:41:21 EDT; 14min ago `- ConditionUser=!root was not met Listen: /run/user/0/pulse/native (Stream)
Apr 25 14:41:21 gb250 systemd[1058]: PipeWire PulseAudio was skipped because of an unmet condition check (ConditionUser=!root). # systemctl --global --user status wireplumber
- wireplumber.service - Multimedia Service Session Manager Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled) Active: active (running) since Tue 2023-04-25 14:41:25 EDT; 14min ago Main PID: 1236 (wireplumber) Tasks: 5 (limit: 4915) CPU: 271ms CGroup: /user.slice/user-0.slice/user@0.service/session.slice/wireplumber.service `-1236 /usr/bin/wireplumber
Apr 25 14:41:25 gb250 systemd[1058]: Started Multimedia Service Session Manager. Apr 25 14:41:26 gb250 wireplumber[1236]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner #
Different host (ab560), same problem, so can't get anything useful done except via remote login: # inxi -ASaz System: Kernel: 6.2.12-desktop-1.mga9 arch: x86_64 bits: 64 compiler: gcc v: 12.2.1 parameters: BOOT_IMAGE=/boot/vmlinuz root=LABEL=tm8p19mga9 noresume audit=0 ipv6.disable=1 net.ifnames=0 consoleblank=0 preempt=full mitigations=off Desktop: Trinity info: kicker wm: Twin vt: 7 dm: 1: TDM 2: XDM Distro: Mageia 9 Audio: Device-1: Intel Tiger Lake-H HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:43c8 class-ID: 0403 API: ALSA v: k6.2.12-desktop-1.mga9 status: kernel-api with: aoss type: oss-emulator tools: alsamixer,amixer Server-1: JACK v: 1.9.21 status: off tools: jack_control Server-2: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse status: off 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl # rpm -qa | grep -E 'alsa|arts|audio|gstr|jack|mix|pavu|puls|sof-|sound|vlc|wire|xdg' | sort alsa-firmware-1.2.4-1.mga9 alsa-plugins-config-1.2.7.1-2.mga9 alsa-sof-firmware-2.2.5-1.mga9.nonfree alsa-tools-firmware-1.2.5-2.mga9 alsa-utils-1.2.9-1.mga9 alsaconf-1.2.9-1.mga9 audiofile-0.3.6-12.mga9 aumix-text-2.9.1-13.mga9 esound-libs-0.2.41-1.mga6 gstreamer1.0-tools-1.22.3-1.mga9 jackit-1.9.21-3.mga9 kparts-5.105.0-1.mga9 lib64alsa-oss0-1.1.8-3.mga9 lib64alsa-plugins-1.2.7.1-2.mga9 lib64alsa2-1.2.9-1.mga9 lib64audiofile1-0.3.6-12.mga9 lib64gstreamer-plugins-base1.0_0-1.22.3-1.mga9 lib64gstreamer1.0_0-1.22.3-1.mga9 lib64jack0-1.9.21-3.mga9 lib64kf5parts5-5.105.0-1.mga9 lib64pipewire0.3_0-0.3.70-1.mga9 lib64pulseaudio0-16.1-14.mga9 lib64pulsecommon16.1-16.1-14.mga9 lib64pulseglib20-16.1-14.mga9 lib64webrtc-audio-processing1-0.3.1-4.mga9 lib64wireplumber0-0.4.14-1.mga9 lib64zita-alsa-pcmi0-0.6.1-1.mga9 libalsa-data-1.2.9-1.mga9 pavucontrol-qt-1.3.0-1.mga9 pipewire-0.3.70-1.mga9 pipewire-alsa-0.3.70-1.mga9 pipewire-module-x11-0.3.70-1.mga9 pipewire-plugin-jack-0.3.70-1.mga9 pipewire-pulseaudio-0.3.70-1.mga9 pipewire-utils-0.3.70-1.mga9 pulseaudio-client-config-16.1-14.mga9 pulseaudio-utils-16.1-14.mga9 run-parts-4.8.4-4.mga9 sound-scripts-0.62-23.mga9 sound-theme-freedesktop-0.8-9.mga9 task-pipewire-9-2.mga9 trinity-arts-1.5.10-14.1.0_1.mga9 trinity-kmix-14.1.0-1.mga9 wireless-regdb-20230503-1.mga9 wireplumber-0.4.14-1.mga9 xdg-user-dirs-0.18-1.mga9 xdg-user-dirs-gtk-0.11-1.mga9 xdg-utils-1.1.3-10.mga9 # What can be done to fix this?
Felix Miata composed on 2023-04-25 15:07 (UTC-0400):
Error - artsmessage: Sound server fatal error: cpu overload, aborting
This message pops up on session login, and repeats if dismissed. How can I make it go away and stay away? Lots of noise in .xsession-errors too! :(
# pinxi -ASaz --vs --zl --hostname pinxi 3.3.26-19 (2023-04-24) System: Host: gb250 Kernel: 6.2.12-1-default arch: x86_64 bits: 64 compiler: gcc v: 13.0.1 parameters: BOOT_IMAGE=/boot/vmlinuz root=LABEL=<filter> rd.hostonly=0 noresume ipv6.disable=1 net.ifnames=0 mitigations=none preempt=full video=1440x900@60 Desktop: Trinity v: R14.0.13 tk: Qt v: 3.5.0 info: kicker wm: Twin v: 3.0 vt: 7 dm: 1: TDM 2: XDM Distro: openSUSE Tumbleweed 20230424 Audio: Device-1: Intel 200 Series PCH HD Audio vendor: Gigabyte driver: snd_hda_intel v: kernel alternate: snd_soc_avs bus-ID: 00:1f.3 chip-ID: 8086:a2f0 class-ID: 0403 API: ALSA v: k6.2.12-1-default status: kernel-api tools: alsactl,alsamixer,amixer Server-1: aRts v: 1.5.10 status: off with: artswrapper status: off tools: artsdsp Server-2: PipeWire v: 0.3.69 status: active with: 1: pipewire-pulse status: off 2: wireplumber status: active 3: pipewire-alsa type: plugin tools: pactl,pw-cat,pw-cli,wpctl # aplay /usr/share/sounds/alsa/test.wav # analog OK, but TDE artsmessage "cpu overload" Playing WAVE '/usr/share/sounds/alsa/test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo # rpm -qa | grep -E 'alsa|arts|gstr|jack|mix|pavu|puls|wire' | sort alsa-1.2.8-1.2.x86_64 alsa-ucm-conf-1.2.8-1.2.noarch alsa-utils-1.2.8-1.2.x86_64 gstreamer-1.22.2-1.1.x86_64 gstreamer-plugins-base-1.22.2-1.1.x86_64 kpipewire-imports-5.27.4-1.1.x86_64 kquickcharts-5.105.0-1.1.x86_64 libgstreamer-1_0-0-1.22.2-1.1.x86_64 libgstriff-1_0-0-1.22.2-1.1.x86_64 libjack0-1.9.21-1.5.x86_64 libKF5Parts5-5.105.0-1.1.x86_64 libpipewire-0_3-0-0.3.69-2.1.x86_64 libpulse-mainloop-glib0-16.1-3.1.x86_64 libpulse0-16.1-3.1.x86_64 libwireplumber-0_4-0-0.4.14-1.1.x86_64 pipewire-0.3.69-2.1.x86_64 pipewire-alsa-0.3.69-2.1.x86_64 pipewire-modules-0_3-0.3.69-2.1.x86_64 pipewire-pulseaudio-0.3.69-2.1.x86_64 pipewire-spa-plugins-0_2-0.3.69-2.1.x86_64 pipewire-spa-tools-0.3.69-2.1.x86_64 pipewire-tools-0.3.69-2.1.x86_64 pulseaudio-setup-16.1-3.1.x86_64 pulseaudio-utils-16.1-3.1.x86_64 trinity-arts-1.5.10-14.0.13_1.osstw.x86_64 trinity-kmix-14.0.13-1.osstw.x86_64 trinity-libarts-akode-14.0.13-1.osstw.x86_64 trinity-libarts-audiofile-14.0.13-1.osstw.x86_64 trinity-libarts-mpeglib-14.0.13-1.osstw.x86_64 trinity-libarts-xine-14.0.13-1.osstw.x86_64 wireplumber-0.4.14-1.1.x86_64 wireplumber-audio-0.4.14-1.1.noarch # systemctl --global --user status pipewire.{service,socket}
- pipewire.service - PipeWire Multimedia Service Loaded: loaded (/usr/lib/systemd/user/pipewire.service; disabled; preset: disabled) Active: active (running) since Tue 2023-04-25 14:41:25 EDT; 13min ago
TriggeredBy: * pipewire.socket Main PID: 1225 (pipewire) Tasks: 2 (limit: 4915) CPU: 268ms CGroup: /user.slice/user-0.slice/user@0.service/session.slice/pipewire.service `-1225 /usr/bin/pipewire
Apr 25 14:41:25 gb250 systemd[1058]: Started PipeWire Multimedia Service.
- pipewire.socket - PipeWire Multimedia System Socket Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled) Active: active (running) since Tue 2023-04-25 14:41:21 EDT; 14min ago Triggers: * pipewire.service Listen: /run/user/0/pipewire-0 (Stream) CGroup: /user.slice/user-0.slice/user@0.service/app.slice/pipewire.socket
Apr 25 14:41:21 gb250 systemd[1058]: Listening on PipeWire Multimedia System Socket. # systemctl --global --user status pipewire-pulse.{service,socket}
- pipewire-pulse.service - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.service; disabled; preset: disabled) Active: inactive (dead)
TriggeredBy: * pipewire-pulse.socket
- pipewire-pulse.socket - PipeWire PulseAudio Loaded: loaded (/usr/lib/systemd/user/pipewire-pulse.socket; enabled; preset: enabled) Active: inactive (dead) Triggers: * pipewire-pulse.service Condition: start condition failed at Tue 2023-04-25 14:41:21 EDT; 14min ago `- ConditionUser=!root was not met Listen: /run/user/0/pulse/native (Stream)
Apr 25 14:41:21 gb250 systemd[1058]: PipeWire PulseAudio was skipped because of an unmet condition check (ConditionUser=!root). # systemctl --global --user status wireplumber
- wireplumber.service - Multimedia Service Session Manager Loaded: loaded (/usr/lib/systemd/user/wireplumber.service; enabled; preset: enabled) Active: active (running) since Tue 2023-04-25 14:41:25 EDT; 14min ago Main PID: 1236 (wireplumber) Tasks: 5 (limit: 4915) CPU: 271ms CGroup: /user.slice/user-0.slice/user@0.service/session.slice/wireplumber.service `-1236 /usr/bin/wireplumber
Apr 25 14:41:25 gb250 systemd[1058]: Started Multimedia Service Session Manager. Apr 25 14:41:26 gb250 wireplumber[1236]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NameHasNoOwner #
Still common on Mageia installations. I wonder if $PATH has anything to do with it:
# inxi -S System: Host: 00srv Kernel: 5.14.21-150500.55.62-default arch: x86_64 bits: 64 Console: pty pts/9 Distro: openSUSE Leap 15.5 # echo $PATH /sbin:/usr/sbin:/usr/local/sbin:/root/bin:/usr/local/bin:/usr/bin:/bin:/opt/kde3/bin
# inxi -S System: Host: hpg33 Kernel: 6.6.28-desktop-1.mga9 arch: x86_64 bits: 64 Desktop: Trinity v: N/A Distro: Mageia 9 # echo $PATH /usr/local/sbin:/usr/sbin:/usr/local/bin:/usr/bin:/usr/lib64/qt5/bin
The inxi author is the one who noticed lack of /opt/trinity/bin in $PATH on Mageia.
-
deloptes -
E. Liddell -
Felix Miata