9 May
2011
9 May
'11
4:31 p.m.
All, (Baho and Calvin especially)
I need to get poppler-qt3 building to enable -DWITH_PDF=ON in kdegraphics.
Right now I have kdegraphics on Arch building with:
cmake ${srcdir}/${_svnmod} \
-DCMAKE_INSTALL_PREFIX=${trinity_prefix} \
-DCMAKE_VERBOSE_MAKEFILE=ON \
-DQT_VERSION=3 \
-DCMAKE_CXX_FLAGS="-fpermissive" \
-DWITH_T1LIB=ON \
-DWITH_LIBPAPER=ON \
-DWITH_TIFF=ON \
-DWITH_OPENEXR=ON \
-DWITH_PAM=ON \
-DBUILD_ALL=ON
make
# -DWITH_PDF=ON \ (waiting on poppler-qt3)
poppler-qt3 was building a month or so ago, but now I'm stuck. The regular
arch version built up until the gcc 4.6 change (or just a little before). Now on
the regular Arch install it fails with the following error:
make[2]: Entering directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:91:13: error: 'ptrdiff_t' does not name a type
/opt/qt/include/qvaluelist.h:167:13: error: 'ptrdiff_t' does not name a type
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:427:13: error: 'ptrdiff_t' does not name a type
make[2]: *** [poppler-document.lo] Error 1
make[2]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
With the trinity-poppler-qt3, I had to add an export adding
/opt/qt/lib/pkgconfig to the PKGBUILD:
export PKG_CONFIG_PATH=/opt/qt/lib/pkgconfig:${PKG_CONFIG_PATH}
then the build gets past the configure error of:
"configure: error: Qt development libraries not found"
the fatal error now is:
make[2]: Entering directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
CXX poppler-fontinfo.lo
CXX poppler-link.lo
CXX poppler-page.lo
In file included from poppler-page.cc:28:0:
/opt/qt/include/qimage.h: In member function 'bool
QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61:61: warning: suggest parentheses around '&&'
within
'||' [-Wparentheses]
poppler-page.cc: In member function 'QImage Poppler::Page::renderToImage(double,
double, bool) const':
poppler-page.cc:76:18: warning: variable 'color_ptr' set but not used
[-Wunused-but-set-variable]
CXX poppler-page-transition.lo
CXX poppler-private.lo
CXXLD libpoppler-qt.la
/usr/bin/ld: cannot find -lqt-mt
collect2: ld returned 1 exit status
make[2]: *** [libpoppler-qt.la] Error 1
make[2]: Leaving directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
I don't understand how there is a ld error on -lqt-mt -- it's there:
18:27 trinity:~/tblds/trinity-poppler-qt3> l /opt/qt/lib/
<snip>
-rw-r--r-- 1 root root 809 May 5 16:01 libqt-mt.prl
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so -> libqt-mt.so.3.3.8
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so.3 -> libqt-mt.so.3.3.8
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so.3.3 -> libqt-mt.so.3.3.8
-rwxr-xr-x 1 root root 8407876 May 5 16:01 libqt-mt.so.3.3.8
<snip>
I need help sorting both out. Anybody see anything that sticks out above?
--
David C. Rankin, J.D.,P.E.
9 May
9 May
4:40 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
look at this
http://www.gossamer-threads.com/lists/gentoo/desktop/228795
On 9 May 2011 19:31, David C. Rankin <drankinatty(a)suddenlinkmail.com> wrote:
All, (Baho and Calvin especially)
I need to get poppler-qt3 building to enable -DWITH_PDF=ON in kdegraphics.
Right now I have kdegraphics on Arch building with:
cmake ${srcdir}/${_svnmod} \
-DCMAKE_INSTALL_PREFIX=${trinity_prefix} \
-DCMAKE_VERBOSE_MAKEFILE=ON \
-DQT_VERSION=3 \
-DCMAKE_CXX_FLAGS="-fpermissive" \
-DWITH_T1LIB=ON \
-DWITH_LIBPAPER=ON \
-DWITH_TIFF=ON \
-DWITH_OPENEXR=ON \
-DWITH_PAM=ON \
-DBUILD_ALL=ON
make
# -DWITH_PDF=ON \ (waiting on poppler-qt3)
poppler-qt3 was building a month or so ago, but now I'm stuck. The regular
arch version built up until the gcc 4.6 change (or just a little before).
Now on the regular Arch install it fails with the following error:
make[2]: Entering directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:91:13: error: 'ptrdiff_t' does not name a type
/opt/qt/include/qvaluelist.h:167:13: error: 'ptrdiff_t' does not name a type
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:427:13: error: 'ptrdiff_t' does not name a type
make[2]: *** [poppler-document.lo] Error 1
make[2]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
With the trinity-poppler-qt3, I had to add an export adding
/opt/qt/lib/pkgconfig to the PKGBUILD:
export PKG_CONFIG_PATH=/opt/qt/lib/pkgconfig:${PKG_CONFIG_PATH}
then the build gets past the configure error of:
"configure: error: Qt development libraries not found"
the fatal error now is:
make[2]: Entering directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
CXX poppler-fontinfo.lo
CXX poppler-link.lo
CXX poppler-page.lo
In file included from poppler-page.cc:28:0:
/opt/qt/include/qimage.h: In member function 'bool
QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61:61: warning: suggest parentheses around '&&'
within '||' [-Wparentheses]
poppler-page.cc: In member function 'QImage
Poppler::Page::renderToImage(double, double, bool) const':
poppler-page.cc:76:18: warning: variable 'color_ptr' set but not used
[-Wunused-but-set-variable]
CXX poppler-page-transition.lo
CXX poppler-private.lo
CXXLD libpoppler-qt.la
/usr/bin/ld: cannot find -lqt-mt
collect2: ld returned 1 exit status
make[2]: *** [libpoppler-qt.la] Error 1
make[2]: Leaving directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
I don't understand how there is a ld error on -lqt-mt -- it's there:
18:27 trinity:~/tblds/trinity-poppler-qt3> l /opt/qt/lib/
<snip>
-rw-r--r-- 1 root root 809 May 5 16:01 libqt-mt.prl
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so ->
libqt-mt.so.3.3.8
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so.3 ->
libqt-mt.so.3.3.8
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so.3.3 ->
libqt-mt.so.3.3.8
-rwxr-xr-x 1 root root 8407876 May 5 16:01 libqt-mt.so.3.3.8
<snip>
I need help sorting both out. Anybody see anything that sticks out above?
--
David C. Rankin, J.D.,P.E.
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-devel-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail:
trinity-devel-help(a)lists.pearsoncomputing.net
Read list messsages on the Web archive:
http://trinity-devel.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
4:41 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
Le Mon, 09 May 2011 18:31:22 -0500,
"David C. Rankin" <drankinatty(a)suddenlinkmail.com> a écrit :
All, (Baho and Calvin especially)
I need to get poppler-qt3 building to enable -DWITH_PDF=ON in
kdegraphics. Right now I have kdegraphics on Arch building with:
cmake ${srcdir}/${_svnmod} \
-DCMAKE_INSTALL_PREFIX=${trinity_prefix} \
-DCMAKE_VERBOSE_MAKEFILE=ON \
-DQT_VERSION=3 \
-DCMAKE_CXX_FLAGS="-fpermissive" \
-DWITH_T1LIB=ON \
-DWITH_LIBPAPER=ON \
-DWITH_TIFF=ON \
-DWITH_OPENEXR=ON \
-DWITH_PAM=ON \
-DBUILD_ALL=ON
make
# -DWITH_PDF=ON \ (waiting on poppler-qt3)
poppler-qt3 was building a month or so ago, but now I'm stuck. The
regular arch version built up until the gcc 4.6 change (or just a
little before). Now on the regular Arch install it fails with the
following error:
make[2]: Entering directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:91:13: error: 'ptrdiff_t' does not name
a type /opt/qt/include/qvaluelist.h:167:13: error: 'ptrdiff_t' does
not name a type In file included
from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46, from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:427:13: error: 'ptrdiff_t' does not name
a type make[2]: *** [poppler-document.lo] Error 1
make[2]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4' make: ***
[all] Error 2 ==> ERROR: A failure occurred in build().
Aborting...
<bigsnip>
I need help sorting both out. Anybody see anything that sticks out
above?
Can't you use the non-trinity poppler-qt3 and correct the build error
by #include'ing <cstddef> ? It's a gcc-4.6 related error again.
5:02 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:31 PM, David C. Rankin wrote:
All, (Baho and Calvin especially)
I need to get poppler-qt3 building to enable -DWITH_PDF=ON in
kdegraphics. Right now I have kdegraphics on Arch building with:
cmake ${srcdir}/${_svnmod} \
-DCMAKE_INSTALL_PREFIX=${trinity_prefix} \
-DCMAKE_VERBOSE_MAKEFILE=ON \
-DQT_VERSION=3 \
-DCMAKE_CXX_FLAGS="-fpermissive" \
-DWITH_T1LIB=ON \
-DWITH_LIBPAPER=ON \
-DWITH_TIFF=ON \
-DWITH_OPENEXR=ON \
-DWITH_PAM=ON \
-DBUILD_ALL=ON
make
# -DWITH_PDF=ON \ (waiting on poppler-qt3)
poppler-qt3 was building a month or so ago, but now I'm stuck. The
regular arch version built up until the gcc 4.6 change (or just a
little before). Now on the regular Arch install it fails with the
following error:
make[2]: Entering directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:91:13: error: 'ptrdiff_t' does not name a
type
/opt/qt/include/qvaluelist.h:167:13: error: 'ptrdiff_t' does not name
a type
In file included from /opt/qt/include/qstringlist.h:45:0,
from /opt/qt/include/qcolor.h:46,
from /opt/qt/include/qpixmap.h:46,
from ./poppler-qt.h:33,
from poppler-document.cc:23:
/opt/qt/include/qvaluelist.h:427:13: error: 'ptrdiff_t' does not name
a type
make[2]: *** [poppler-document.lo] Error 1
make[2]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/david/arch/pkg/bld/poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
With the trinity-poppler-qt3, I had to add an export adding
/opt/qt/lib/pkgconfig to the PKGBUILD:
export PKG_CONFIG_PATH=/opt/qt/lib/pkgconfig:${PKG_CONFIG_PATH}
then the build gets past the configure error of:
"configure: error: Qt development libraries not found"
the fatal error now is:
make[2]: Entering directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
CXX poppler-document.lo
CXX poppler-fontinfo.lo
CXX poppler-link.lo
CXX poppler-page.lo
In file included from poppler-page.cc:28:0:
/opt/qt/include/qimage.h: In member function 'bool
QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61:61: warning: suggest parentheses around
'&&' within '||' [-Wparentheses]
poppler-page.cc: In member function 'QImage
Poppler::Page::renderToImage(double, double, bool) const':
poppler-page.cc:76:18: warning: variable 'color_ptr' set but not used
[-Wunused-but-set-variable]
CXX poppler-page-transition.lo
CXX poppler-private.lo
CXXLD libpoppler-qt.la
/usr/bin/ld: cannot find -lqt-mt
collect2: ld returned 1 exit status
make[2]: *** [libpoppler-qt.la] Error 1
make[2]: Leaving directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4/qt'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/david/tblds/trinity-poppler-qt3/src/poppler-0.16.4'
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
I don't understand how there is a ld error on -lqt-mt -- it's there:
18:27 trinity:~/tblds/trinity-poppler-qt3> l /opt/qt/lib/
<snip>
-rw-r--r-- 1 root root 809 May 5 16:01 libqt-mt.prl
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so ->
libqt-mt.so.3.3.8
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so.3 ->
libqt-mt.so.3.3.8
lrwxrwxrwx 1 root root 17 May 5 16:00 libqt-mt.so.3.3 ->
libqt-mt.so.3.3.8
-rwxr-xr-x 1 root root 8407876 May 5 16:01 libqt-mt.so.3.3.8
<snip>
I need help sorting both out. Anybody see anything that sticks out
above?
There are some bigger issues than just getting it to build... poppler
doesn't like poppler-qt3
From the Arch poppler PKGBUILD
package_poppler() {
pkgdesc="PDF rendering library based on xpdf 3.0"
depends=('libjpeg' 'gcc-libs' 'cairo' 'libxml2'
'fontconfig'
'openjpeg' 'lcms' 'poppler-data')
conflicts=("poppler-qt3<${pkgver}")
cd "${srcdir}/${pkgbase}-${pkgver}"
make DESTDIR="${pkgdir}" install
rm -f "${pkgdir}"/usr/lib/pkgconfig/poppler-{glib,qt4}.pc
}
In order to get rid of poppler, qt3 will need to be built without cups
support as cups drags in poppler. Then one has the problem of building
kde3/trinity with cups support again dragging in poppler.
What I am doing is building kdegraphics without -DWITH_PDF=ON, kpdf
works without poppler-qt3.
I am also trying to take poppler from arch and build the qt4 and the qt3
bindings, hopefully I will be successfull.
5:06 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
Baho,
What I am doing is building kdegraphics without
-DWITH_PDF=ON, kpdf works
without poppler-qt3.
Because one of the kfile preview plugins requires poppler-qt3
It's not completely needed, but also whenever someone rewrites kpdf
(with poppler) it would be needed
Calvin Morrison
5:09 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 06:41 PM, /dev/ammo42 wrote:
Hah! Now we are getting somewhere! On the regular arch build (with the trinity
3.5.12 packages) I was able to build the poppler-qt package.
poppler-qt3-0.16.4-1-x86_64.pkg.tar.xz
The BIG problem this presents is that /opt/qt/include/qvaluelist.h (and the rest
of the headers) are owned by Qt3 (which at least for the normal Arch AUR
poppler-qt3 - we will need to have Albert rebuild Qt3 enhanced.
For Trnity - I'll try the same thing and let you know. We will probably need to
patch all the Qt3 headers for <cstddef>.
--
David C. Rankin, J.D.,P.E.
<bigsnip>
I need help sorting both out. Anybody see anything that sticks out
above?
Can't you use the non-trinity poppler-qt3 and correct the build error
by #include'ing<cstddef> ? It's a gcc-4.6 related error again.
5:11 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 9 May 2011 20:09, David C. Rankin <drankinatty(a)suddenlinkmail.com> wrote:
On 05/09/2011 06:41 PM, /dev/ammo42 wrote:
Hah! Now we are getting somewhere! On the regular arch build (with the
trinity 3.5.12 packages) I was able to build the poppler-qt package.
poppler-qt3-0.16.4-1-x86_64.pkg.tar.xz
The BIG problem this presents is that /opt/qt/include/qvaluelist.h (and the
rest of the headers) are owned by Qt3 (which at least for the normal Arch
AUR poppler-qt3 - we will need to have Albert rebuild Qt3 enhanced.
For Trnity - I'll try the same thing and let you know. We will probably need
to patch all the Qt3 headers for <cstddef>.
--
David C. Rankin, J.D.,P.E.
Did that link work?
Also if the files are owned by another package, just exclude them from
the poppler-qt package.
Calvin Morrison
<bigsnip>
I need help sorting both out. Anybody see anything that sticks out
above?
Can't you use the non-trinity poppler-qt3 and correct the build error
by #include'ing<cstddef> ? It's a gcc-4.6 related error again.
5:17 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:09 PM, David C. Rankin wrote:
On 05/09/2011 06:41 PM, /dev/ammo42 wrote:
Hah! Now we are getting somewhere! On the regular arch build (with the trinity
3.5.12 packages) I was able to build the poppler-qt package.
poppler-qt3-0.16.4-1-x86_64.pkg.tar.xz
The BIG problem this presents is that /opt/qt/include/qvaluelist.h (and the rest
of the headers) are owned by Qt3 (which at least for the normal Arch AUR
poppler-qt3 - we will need to have Albert rebuild Qt3 enhanced.
For Trnity - I'll try the same thing and let you know. We will probably need to
patch all the Qt3 headers for <cstddef>.
Here is the patch:
--- /opt/qt/include/qvaluelist.h
+++ /opt/qt/include/qvaluelist.h 2011-05-09 19:00:30.000000000 -0500
@@ -40,6 +40,7 @@
#ifndef QVALUELIST_H
#define QVALUELIST_H
+#include <cstddef>
#ifndef QT_H
#include "qtl.h"
--
David C. Rankin, J.D.,P.E.
<bigsnip>
I need help sorting both out. Anybody see anything that sticks out
above?
Can't you use the non-trinity poppler-qt3 and correct the build error
by #include'ing<cstddef> ? It's a gcc-4.6 related error again.
5:20 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:11 PM, Calvin Morrison wrote:
Did that link work?
Also if the files are owned by another package, just exclude them from
the poppler-qt package.
Calvin Morrison
Dunno, haven't had time to compare it yet to the gcc46.diff I'm using from the
opensuse guys :)
I have a feeling more Qt3 patches will be necessary.
--
David C. Rankin, J.D.,P.E.
5:23 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 9 May 2011 20:20, David C. Rankin <drankinatty(a)suddenlinkmail.com> wrote:
On 05/09/2011 07:11 PM, Calvin Morrison wrote:
Ok,
yes, the longer we hold onto qt3 the longer we will end up
slaughtering it with loads of patches :)
Did that link work?
Also if the files are owned by another package, just exclude them from
the poppler-qt package.
Calvin Morrison
Dunno, haven't had time to compare it yet to the gcc46.diff I'm using from
the opensuse guys :)
I have a feeling more Qt3 patches will be necessary.
5:27 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 08:17 PM, David C. Rankin wrote:
On 05/09/2011 07:09 PM, David C. Rankin wrote:
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15
19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-04-11 00:16:04.000000000
+0100
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15
19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11
00:16:49.000000000 +0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
On 05/09/2011 06:41 PM, /dev/ammo42 wrote:
Hah! Now we are getting somewhere! On the regular arch build (with
the trinity
3.5.12 packages) I was able to build the poppler-qt package.
poppler-qt3-0.16.4-1-x86_64.pkg.tar.xz
The BIG problem this presents is that /opt/qt/include/qvaluelist.h
(and the rest
of the headers) are owned by Qt3 (which at least for the normal Arch AUR
poppler-qt3 - we will need to have Albert rebuild Qt3 enhanced.
For Trnity - I'll try the same thing and let you know. We will
probably need to
patch all the Qt3 headers for <cstddef>.
Here is the patch:
--- /opt/qt/include/qvaluelist.h
+++ /opt/qt/include/qvaluelist.h 2011-05-09 19:00:30.000000000 -0500
@@ -40,6 +40,7 @@
#ifndef QVALUELIST_H
#define QVALUELIST_H
+#include <cstddef>
#ifndef QT_H
#include "qtl.h"
<bigsnip>
I need help sorting both out. Anybody see anything that sticks out
above?
Can't you use the non-trinity poppler-qt3 and correct the build error
by #include'ing<cstddef> ? It's a gcc-4.6 related error again.
5:27 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:02 PM, Baho Utot wrote:
In order to get rid of poppler, qt3 will need to be
built without cups support
as cups drags in poppler. Then one has the problem of building kde3/trinity
with cups support again dragging in poppler.
What I am doing is building kdegraphics without -DWITH_PDF=ON, kpdf works
without poppler-qt3.
That's where I am right now. I wanted to try the -DWITH_PDF=ON to see what
additional functionality that provided. I don't know for sure, but I think it
might be used for pdf thumbnailing or other ancillary pdf processing functions.
The current kpdf works great with kdegraphics built without -DWITH_PDF=ON, so
I'm not driving myself crazy over it (I've already done that long ago :)
However - what sucks is I'm the poppler-qt3 maintainer for AUR, but I'm NOT the
AUR maintainer of Qt3 - issues.....
--
David C. Rankin, J.D.,P.E.
5:32 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
That's where I am right now. I wanted to try the
-DWITH_PDF=ON to see what
additional functionality that provided. I don't know for sure, but I think
it might be used for pdf thumbnailing or other ancillary pdf processing
functions. The current kpdf works great with kdegraphics built without
-DWITH_PDF=ON, so I'm not driving myself crazy over it (I've already done
that long ago :)
However - what sucks is I'm the poppler-qt3 maintainer for AUR, but I'm NOT
the AUR maintainer of Qt3 - issues.....
Here we go.
1) yes it is the thumbnailing plugin that it is used for, nothing
else, unfortunately if you disable it, you loose all of your
kfile-plugins.
2) make your own package, like trinity-qt3 ( i think i own that one,
but you can have it) that way you can muck around with it, and give it
what we need.
10 May
10 May
5:28 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:23 PM, Calvin Morrison wrote:
On 9 May 2011 20:20, David C.
Rankin<drankinatty(a)suddenlinkmail.com> wrote:
Let's get a handle on how many we are talking about. Qt3 works very, very well.
No need to throw the baby out with the bath water just yet :)
--
David C. Rankin, J.D.,P.E.
On 05/09/2011 07:11 PM, Calvin Morrison wrote:
Ok,
yes, the longer we hold onto qt3 the longer we will end up
slaughtering it with loads of patches :)
Did that link work?
Also if the files are owned by another package, just exclude them from
the poppler-qt package.
Calvin Morrison
Dunno, haven't had time to compare it yet to the gcc46.diff I'm using from
the opensuse guys :)
I have a feeling more Qt3 patches will be necessary.
5:34 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:32 PM, Calvin Morrison wrote:
I should have time to try the rebuild with Baho's patch and then see if
kdegraphics will build with -DWITH_PDF=ON. If so, we are in good shape.
Once we get a consistent set of patches for Qt3 to work with gcc 4.6, things
should be stable for a while.
--
David C. Rankin, J.D.,P.E.
That's
where I am right now. I wanted to try the -DWITH_PDF=ON to see what
additional functionality that provided. I don't know for sure, but I think
it might be used for pdf thumbnailing or other ancillary pdf processing
functions. The current kpdf works great with kdegraphics built without
-DWITH_PDF=ON, so I'm not driving myself crazy over it (I've already done
that long ago :)
However - what sucks is I'm the poppler-qt3 maintainer for AUR, but I'm NOT
the AUR maintainer of Qt3 - issues.....
Here we go.
1) yes it is the thumbnailing plugin that it is used for, nothing
else, unfortunately if you disable it, you loose all of your
kfile-plugins.
2) make your own package, like trinity-qt3 ( i think i own that one,
but you can have it) that way you can muck around with it, and give it
what we need.
6:14 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:27 PM, Baho Utot wrote:
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15 19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-04-11 00:16:04.000000000 +0100
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15 19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11 00:16:49.000000000 +0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
Hmm..,
This is basically what the gcc46.diff from Robert does. It looks like it
wasn't being fully applied in my PKGBUILD - I'll have to look into that :(
--
David C. Rankin, J.D.,P.E.
6:17 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 08:14 AM, David C. Rankin wrote:
Hmm..,
This is basically what the gcc46.diff from Robert does. It looks like it
wasn't being fully applied in my PKGBUILD - I'll have to look into that :(
AARGH! damn! I see what happened. My Qt3 PKGBUILD got overwritten and it wiped
out the application of the gcc46.diff patch... Sheesh...
--
David C. Rankin, J.D.,P.E.
6:30 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 08:17 AM, David C. Rankin wrote:
Nope -- that wasn't the case either - it was being correctly applied. (I was
looking at the old 'PKGBUILD-qt3' instead of PKGBUILD-qt3-trinity'. It's
there
in what I uploaded to trinitydesktop.org (See):
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
Hmmm... More investigation required.
--
David C. Rankin, J.D.,P.E.
Hmm..,
This is basically what the gcc46.diff from Robert does. It looks like it
wasn't being fully applied in my PKGBUILD - I'll have to look into that :(
AARGH! damn! I see what happened. My Qt3 PKGBUILD got overwritten and it wiped
out the application of the gcc46.diff patch... Sheesh...
6:40 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/09/2011 07:27 PM, Baho Utot wrote:
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15 19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-04-11 00:16:04.000000000 +0100
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15 19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11 00:16:49.000000000 +0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
Baho,
We need to blend your patch with this one:
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
--
David C. Rankin, J.D.,P.E.
7:05 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 08:40 AM, David C. Rankin wrote:
On 05/09/2011 07:27 PM, Baho Utot wrote:
Here is what I come up with (do you see anything wrong with doing it this way?):
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qmap.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-05-10 08:47:27.000000000 -0500
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
@@ -107,7 +108,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -223,7 +224,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -604,7 +605,7 @@
typedef value_type& reference;
typedef const value_type& const_reference;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluelist.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-05-10 08:46:46.000000000 -0500
@@ -50,6 +50,7 @@
#ifndef QT_NO_STL
#include <iterator>
#include <list>
+#include <cstddef>
#endif
//#define QT_CHECK_VALUELIST_RANGE
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluevector.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluevector.h 2011-05-10 08:46:46.000000000 -0500
@@ -244,7 +244,7 @@
typedef const value_type& const_reference;
typedef size_t size_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
--
David C. Rankin, J.D.,P.E.
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15 19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-04-11 00:16:04.000000000 +0100
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15 19:09:13.000000000
+0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11 00:16:49.000000000 +0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
Baho,
We need to blend your patch with this one:
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
8:46 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 09:05 AM, David C. Rankin wrote:
On 05/10/2011 08:40 AM, David C. Rankin wrote:
UUGH! I killed Qt3.... After adding the qmap.h patch I get a Qt3 symbol lookup
error I don't even recognize:
../../../include/qimage.h:61:61: warning: suggest parentheses around ‘&&’ within
‘||’ [-Wparentheses]
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/bin/uic -L
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/plugins listvieweditor.ui
-i listvieweditor.h -o listvieweditor.cpp
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/bin/uic: symbol lookup
error: /opt/trinity/lib/libkdecore.so.4: undefined symbol:
_ZN7KGlobal20deleteStaticDeletersEv
make[4]: *** [listvieweditor.cpp] Error 127
make[4]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools/designer/designer'
make[3]: *** [sub-designer] Error 2
make[3]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools/designer'
make[2]: *** [sub-designer] Error 2
make[2]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools'
make[1]: *** [sub-tools] Error 2
make[1]: Leaving directory `/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b'
make: *** [init] Error 2
==> ERROR: A failure occurred in build().
Aborting...
It has got to be the qmap.h patch, because I've been using the gcc46.diff
without issue and all I did was ass the qmap.h <cstddef> include based on Baho's
suggestion :)
--
David C. Rankin, J.D.,P.E.
On 05/09/2011 07:27 PM, Baho Utot wrote:
Here is what I come up with (do you see anything wrong with doing it this way?):
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qmap.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-05-10 08:47:27.000000000 -0500
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
@@ -107,7 +108,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -223,7 +224,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -604,7 +605,7 @@
typedef value_type& reference;
typedef const value_type& const_reference;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluelist.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-05-10 08:46:46.000000000 -0500
@@ -50,6 +50,7 @@
#ifndef QT_NO_STL
#include <iterator>
#include <list>
+#include <cstddef>
#endif
//#define QT_CHECK_VALUELIST_RANGE
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluevector.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluevector.h 2011-05-10 08:46:46.000000000 -0500
@@ -244,7 +244,7 @@
typedef const value_type& const_reference;
typedef size_t size_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15 19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-04-11 00:16:04.000000000 +0100
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15 19:09:13.000000000
+0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11 00:16:49.000000000
+0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
Baho,
We need to blend your patch with this one:
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
10:07 a.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
Le Tue, 10 May 2011 10:46:57 -0500,
"David C. Rankin" <drankinatty(a)suddenlinkmail.com> a écrit :
On 05/10/2011 09:05 AM, David C. Rankin wrote:
It has a smell of ABI break: does
removing Trinity libraries and rebuilding
all packages help ?
BTW, the header patch doesn't seem to change the ABI :
===========
dd@darkstar:/tmp$ g++ -c -g test.cpp
dd@darkstar:/tmp$ g++ -c -g test2.cpp
dd@darkstar:/tmp$ nm test.o
0000000000000079 t _GLOBAL__I_main
0000000000000039 t _Z41__static_initialization_and_destruction_0ii
U _ZNSolsEl
U _ZNSt8ios_base4InitC1Ev
U _ZNSt8ios_base4InitD1Ev
U _ZSt4cout
0000000000000000 b _ZStL8__ioinit
U __cxa_atexit
U __dso_handle
0000000000000000 T main
dd@darkstar:/tmp$ nm test2.o
0000000000000079 t _GLOBAL__I_main
0000000000000039 t _Z41__static_initialization_and_destruction_0ii
U _ZNSolsEl
U _ZNSt8ios_base4InitC1Ev
U _ZNSt8ios_base4InitD1Ev
U _ZSt4cout
0000000000000000 b _ZStL8__ioinit
U __cxa_atexit
U __dso_handle
0000000000000000 T main
dd@darkstar:/tmp$ cat test.cpp
#include <cstddef>
#include <iostream>
int main()
{
int a,b;
std::ptrdiff_t c=&b-&a;
std::cout << c;
return 0;
}
dd@darkstar:/tmp$ cat test2.cpp
//#include <cstddef>
#include <iostream>
int main()
{
int a,b;
ptrdiff_t c=&b-&a;
std::cout << c;
return 0;
}
============
I googled the mangled name and obtained few results:
http://old.nabble.com/Bug-434590%3A-twinkle%3A-Crashes-on-every-call-when-u…
http://lists.altlinux.org/pipermail/devel/2010-March/181000.html (in Russian).
On 05/10/2011 08:40 AM, David C. Rankin wrote:
UUGH! I killed Qt3.... After adding the qmap.h patch I get a Qt3
symbol lookup error I don't even recognize: On 05/09/2011 07:27 PM, Baho Utot wrote:
Here is what I come up with (do you see anything wrong with doing
it this way?):
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qmap.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-05-10
08:47:27.000000000 -0500 @@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
@@ -107,7 +108,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -223,7 +224,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -604,7 +605,7 @@
typedef value_type& reference;
typedef const value_type& const_reference;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluelist.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-05-10
08:46:46.000000000 -0500 @@ -50,6 +50,7 @@
#ifndef QT_NO_STL
#include <iterator>
#include <list>
+#include <cstddef>
#endif
//#define QT_CHECK_VALUELIST_RANGE
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluevector.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluevector.h 2011-05-10
08:46:46.000000000 -0500 @@ -244,7 +244,7 @@
typedef const value_type& const_reference;
typedef size_t size_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15
19:09:13.000000000 +0000 +++ qt-x11-free-3.3.8b/src/tools/qmap.h
2011-04-11 00:16:04.000000000 +0100 @@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15
19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11
00:16:49.000000000 +0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
Baho,
We need to blend your patch with this one:
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
../../../include/qimage.h:61:61: warning: suggest parentheses around
‘&&’ within ‘||’ [-Wparentheses]
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/bin/uic -L
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/plugins
listvieweditor.ui -i listvieweditor.h -o listvieweditor.cpp
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/bin/uic: symbol
lookup error: /opt/trinity/lib/libkdecore.so.4: undefined symbol:
_ZN7KGlobal20deleteStaticDeletersEv
make[4]: *** [listvieweditor.cpp] Error 127
make[4]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools/designer/designer'
make[3]: *** [sub-designer] Error 2
make[3]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools/designer'
make[2]: *** [sub-designer] Error 2
make[2]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools'
make[1]: *** [sub-tools] Error 2
make[1]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b' make: ***
[init] Error 2 ==> ERROR: A failure occurred in build().
Aborting...
It has got to be the qmap.h patch, because I've been using the
gcc46.diff without issue and all I did was ass the qmap.h <cstddef>
include based on Baho's suggestion :)
3:37 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 11:46 AM, David C. Rankin wrote:
On 05/10/2011 09:05 AM, David C. Rankin wrote:
I rebuilt my qt3 and it compiles just fine with my qt.diff patch
I am going to see if it fixes the poppler-qt3 issue.
cp -f "../doc/html/y2k.html" "/build/pkg/usr/qt3/doc/html/"
make[2]: Leaving directory `/build/src/qt-x11-free-3.3.8b/src'
make[1]: Leaving directory `/build/src/qt-x11-free-3.3.8b'
`/build/pkg/usr/qt3/mkspecs/linux-g++/linux-g++' -> `../linux-g++'
`/build/pkg/usr/qt3/lib/libqt.so' -> `libqt-mt.so'
install: creating directory `/build/pkg/etc'
install: creating directory `/build/pkg/etc/profile.d'
==> Tidying install...
-> Removing doc files...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> WARNING: Package contains reference to $srcdir
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: qt3 3.3.8b-6 (Tue May 10 00:32:23 UTC 2011)
On 05/10/2011 08:40 AM, David C. Rankin wrote:
UUGH! I killed Qt3.... After adding the qmap.h patch I get a Qt3
symbol lookup error I don't even recognize:
../../../include/qimage.h:61:61: warning: suggest parentheses around
‘&&’ within ‘||’ [-Wparentheses]
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/bin/uic -L
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/plugins
listvieweditor.ui -i listvieweditor.h -o listvieweditor.cpp
/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/bin/uic: symbol
lookup error: /opt/trinity/lib/libkdecore.so.4: undefined symbol:
_ZN7KGlobal20deleteStaticDeletersEv
make[4]: *** [listvieweditor.cpp] Error 127
make[4]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools/designer/designer'
make[3]: *** [sub-designer] Error 2
make[3]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools/designer'
make[2]: *** [sub-designer] Error 2
make[2]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b/tools'
make[1]: *** [sub-tools] Error 2
make[1]: Leaving directory
`/home/david/tblds/trinity-qt3/src/qt-x11-free-3.3.8b'
make: *** [init] Error 2
==> ERROR: A failure occurred in build().
Aborting...
It has got to be the qmap.h patch, because I've been using the
gcc46.diff without issue and all I did was ass the qmap.h <cstddef>
include based on Baho's suggestion :)
On 05/09/2011 07:27 PM, Baho Utot wrote:
Here is what I come up with (do you see anything wrong with doing it
this way?):
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qmap.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-05-10 08:47:27.000000000
-0500
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
@@ -107,7 +108,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -223,7 +224,7 @@
#endif
typedef T value_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
@@ -604,7 +605,7 @@
typedef value_type& reference;
typedef const value_type& const_reference;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluelist.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-05-10
08:46:46.000000000 -0500
@@ -50,6 +50,7 @@
#ifndef QT_NO_STL
#include <iterator>
#include <list>
+#include <cstddef>
#endif
//#define QT_CHECK_VALUELIST_RANGE
diff -Naur --label qt-x11-free-3.3.8b qt-x11-free-3.3.8b
qt-x11-free-3.3.8b/src/tools/qvaluevector.h
--- qt-x11-free-3.3.8b
+++ qt-x11-free-3.3.8b/src/tools/qvaluevector.h 2011-05-10
08:46:46.000000000 -0500
@@ -244,7 +244,7 @@
typedef const value_type& const_reference;
typedef size_t size_type;
#ifndef QT_NO_STL
- typedef ptrdiff_t difference_type;
+ typedef std::ptrdiff_t difference_type;
#else
typedef int difference_type;
#endif
Here is the correct patch...
--- qt-x11-free-3.3.8b/src/tools/qmap.h~ 2008-01-15
19:09:13.000000000 +0000
+++ qt-x11-free-3.3.8b/src/tools/qmap.h 2011-04-11
00:16:04.000000000 +0100
@@ -50,6 +50,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <map>
#endif
--- qt-x11-free-3.3.8b/src/tools/qvaluelist.h~ 2008-01-15
19:09:13.000000000
+0000
+++ qt-x11-free-3.3.8b/src/tools/qvaluelist.h 2011-04-11
00:16:49.000000000
+0100
@@ -48,6 +48,7 @@
#endif // QT_H
#ifndef QT_NO_STL
+#include <cstddef>
#include <iterator>
#include <list>
#endif
I am rebuilding qt3 with the correct patch as we speak
Baho,
We need to blend your patch with this one:
http://svn.trinitydesktop.org/svn/trinity-packaging/arch/master/trinity-qt3…
5:25 p.m.
New subject: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 12:07 PM, /dev/ammo42 wrote:
It has a smell of ABI break: does removing Trinity
libraries and rebuilding
all packages help ?
I'm trying that right now. Arch has an 'archroot' similar to debian that
allows
you to build in a pristine new build environment. So far it is building away.
If it works -- it points to some weird problem that had develop in libkdecore.so
that is causing the symbol lookup error...
I'll try Tim's 3.3.8d once this finishes.
--
David C. Rankin, J.D.,P.E.
6 p.m.
New subject: [SOLVED] Re: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 05:37 PM, Baho Utot wrote:
Hah!
With the combined gcc46.diff and the qmap,h <cstddef> patches:
make[3]: Entering directory `/build/src/qt-x11-free-3.3.8b/plugins/src/styles'
make[3]: Nothing to be done for `install'.
make[3]: Leaving directory `/build/src/qt-x11-free-3.3.8b/plugins/src/styles'
make[2]: Leaving directory `/build/src/qt-x11-free-3.3.8b/plugins/src'
make[1]: Leaving directory `/build/src/qt-x11-free-3.3.8b'
==> Tidying install...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
-> Removing libtool .la files...
==> WARNING: Package contains reference to $srcdir
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: trinity-qt3 3.3.8b-1 (Wed May 11 00:30:04 UTC 2011)
-rw-r--r-- 1 nobody nobody 8880732 May 10 19:30
trinity-qt3-3.3.8c-1-x86_64.pkg.tar.xz
There was something in the libkdecore.so that was really mucked things up.
Strange....
--
David C. Rankin, J.D.,P.E.
It has got to
be the qmap.h patch, because I've been using the gcc46.diff
without issue and all I did was ass the qmap.h <cstddef> include based on
Baho's suggestion :)
I rebuilt my qt3 and it compiles just fine with my qt.diff patch
I am going to see if it fixes the poppler-qt3 issue.
cp -f "../doc/html/y2k.html" "/build/pkg/usr/qt3/doc/html/"
make[2]: Leaving directory `/build/src/qt-x11-free-3.3.8b/src'
make[1]: Leaving directory `/build/src/qt-x11-free-3.3.8b'
`/build/pkg/usr/qt3/mkspecs/linux-g++/linux-g++' -> `../linux-g++'
`/build/pkg/usr/qt3/lib/libqt.so' -> `libqt-mt.so'
install: creating directory `/build/pkg/etc'
install: creating directory `/build/pkg/etc/profile.d'
==> Tidying install...
-> Removing doc files...
-> Purging other files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> WARNING: Package contains reference to $srcdir
==> Creating package...
-> Generating .PKGINFO file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: qt3 3.3.8b-6 (Tue May 10 00:32:23 UTC 2011)
7:31 p.m.
New subject: [trinity-devel] [SOLVED] Re: [trinity-devel] poppler-qt3 NEED HELP - Anybody got it building with current poppler-qt & gcc 4.6?
On 05/10/2011 08:00 PM, David C. Rankin wrote:
I am going to see if it fixes the poppler-qt3 issue.
Did poppler-qt3 build? Mine still failed in the archroot after successful qt3
and pyqt3 builds:
checking for libqt3... no
configure: error: in `/build/src/poppler-0.16.4':
configure: error: Qt development libraries not found
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
Build failed, check /dat_e/david/bld/david/build
--
David C. Rankin, J.D.,P.E.
4755
days inactive
4757
days old
25 comments
4 participants
participants (4)
-
/dev/ammo42 -
Baho Utot -
Calvin Morrison -
David C. Rankin