27 Feb
2018
27 Feb
'18
11:32 p.m.
Hi all,
I have been playing recently with mobile phone and pulseaudio. The goal is
to be able to use HSP or A2DP with the computer.
I choose for simplicity A2DP first. With my older phone it works pretty
straight forward
Connect the phone, set A2DP profile in pavucontrol. I had to tell pulseaudio
source and sink the first time, but it then "remembered" the setup and now
each time I connect it does this. So at the end it is possible to play
music from the phone on the PC.
My only problem is that when connect or disconnect kmix is going crazy and
abuses one of the CPUs.
Which would be the way to debug, track or fix this?
Thimoty wanted to to get bluetooth support in TDE long time ago. I looked at
the older kbluetooth code last year, but it looks like >50% rewrite is
needed. I have the feeling that volume control also goes slowly in this
category.
Has someone dealt with this, or had some investigation and most important,
how can I make kmix recover if something changes on PA end
regards
27 Feb
27 Feb
11:51 p.m.
New subject: [trinity-devel] kmix, pulseaudio and bluetooth
On Tue, Feb 27, 2018 at 11:32 PM, deloptes <deloptes(a)gmail.com> wrote:
Hi all,
I have been playing recently with mobile phone and pulseaudio. The goal is
to be able to use HSP or A2DP with the computer.
I choose for simplicity A2DP first. With my older phone it works pretty
straight forward
Connect the phone, set A2DP profile in pavucontrol. I had to tell pulseaudio
source and sink the first time, but it then "remembered" the setup and now
each time I connect it does this. So at the end it is possible to play
music from the phone on the PC.
My only problem is that when connect or disconnect kmix is going crazy and
abuses one of the CPUs.
what happens with alsamixer and alsamixergui? i suspect you have a
loop on your hands where pulseaudio has taken control without your
consent or knowledge of the ALSA devices.
pulseaudio may be interfering, i've had to kill pavucontrol, and
pulseaudio, then *finally* the audio programs were able to wrestle
control of /dev/snd/* away from pulseaudio, and things went to normal.
restarted pavucontrol and it was fine.
i suspect this is *nothing to do with* tde, and everything to do with
pulseaudio being a pile of shit.
l.
28 Feb
28 Feb
7:08 a.m.
Luke Kenneth Casson Leighton wrote:
what happens with alsamixer and alsamixergui? i
suspect you have a
loop on your hands where pulseaudio has taken control without your
consent or knowledge of the ALSA devices.
what do you mean? I installed pulse and let it take control. alsamixer works
just fine. When alsamixer is invoked without argument, it shows pulseaudio
as audiocard. When I run it with -c 0 it shows the audiocard as when pulse
was not installed
pulseaudio may be interfering, i've had to kill
pavucontrol, and
pulseaudio, then finally the audio programs were able to wrestle
control of /dev/snd/* away from pulseaudio, and things went to normal.
restarted pavucontrol and it was fine.
when killing PA, kmix also goes at 100% CPU - need to quit kmix. When I
press volume key kmix starts again
i suspect this is *nothing to do with* tde, and
everything to do with
pulseaudio being a pile of shit.
Well, I appreciate your opinion, but there must be a solution, so that kmix
does not go 100% CPU. I am asking if someone has experience, or had a look
already, otherwise I have to go through kmix code or who knows what else
and write a patch.
regards
9:33 a.m.
New subject: [trinity-devel] Re: kmix, pulseaudio and bluetooth
On Wed, Feb 28, 2018 at 7:08 AM, deloptes <deloptes(a)gmail.com> wrote:
Luke Kenneth Casson Leighton wrote:
... so pulseaudio is configured to "take over" ALSA, and to offer an
alternative ALSA interface.
what happens with alsamixer and alsamixergui? i
suspect you have a
loop on your hands where pulseaudio has taken control without your
consent or knowledge of the ALSA devices.
what do you mean? I installed pulse and let it take control. alsamixer works
just fine. When alsamixer is invoked without argument, it shows pulseaudio
as audiocard. When I run it with -c 0 it shows the audiocard as when
pulse
was not installed
ok yes, so that tells us that pulseaudio is trying to "take over"
ALSA, then offer a 2nd ALSA "gateway" interface.
when killing PA, kmix also goes at 100% CPU - need to
quit kmix. When I
press volume key kmix starts again
interesting.
Well, I appreciate your opinion,
... experience. pulseaudio is involved in most of the audio f***-ups
i've been forced to deal with.
but there must be a solution, so that kmix
does not go 100% CPU.
it's the first time i've ever heard of kmix doing that... but then i
never ran it with pulseaudio.
what happens if you run it *without* pulseaudio? is it fine then?
also, have you ever installed jackd (and the jackd pulseaudio
plugin). i now run with jackd->pulseaudio because i have a MIDI
application that i occasionally run... but also it turns out that
applications are a bit more stable going through jackd.
the advantage is that f****g pulseaudio gets the f*** off the damn
ALSA interface (because it detects that jackd is running and managing
it), and jackd does a hell of a lot better job of directing audio
through to ALSA.
l.
5:59 p.m.
Luke Kenneth Casson Leighton wrote:
yes it becomes a layer above alsa
Yes, forsome time in the beggining there were issues and might be there are
issues now as well, but there are many advantages, which make it inevitable
evil. BT and ofono are just few examples.
well I stated that problem occurs when something changes in pulse audio or
pulseaudio is shut down. What do you expect if kmix runs without
pulseaudio?!
what do you
mean? I installed pulse and let it take control. alsamixer
works just fine. When alsamixer is invoked without argument, it shows
pulseaudio as audiocard.
... so pulseaudio is configured to "take over" ALSA, and to offer an
alternative ALSA interface.
When I run it with -c 0 it shows the audiocard as
when pulse
was not installed
ok yes, so that tells us that pulseaudio is trying to "take over"
ALSA, then offer a 2nd ALSA "gateway" interface.
when killing
PA, kmix also goes at 100% CPU - need to quit kmix. When I
press volume key kmix starts again
interesting.
Well, I appreciate your opinion,
... experience. pulseaudio is involved in most of the audio f***-ups
i've been forced to deal with.
but there must
be a solution, so that kmix
does not go 100% CPU.
it's the first time i've ever heard of kmix doing that... but then i
never ran it with pulseaudio.
what happens if you run it without pulseaudio? is it fine then?
also, have you ever installed jackd (and the jackd
pulseaudio
plugin). i now run with jackd->pulseaudio because i have a MIDI
application that i occasionally run... but also it turns out that
applications are a bit more stable going through jackd.
might be 10y+ since last time - as stated above I don't think it will fit
(A2DP, HSP/HFP etc).
the advantage is that f****g pulseaudio gets the f***
off the damn
ALSA interface (because it detects that jackd is running and managing
it), and jackd does a hell of a lot better job of directing audio
through to ALSA.
to me it sounds like hack a day or two task. I just want to have working BT,
besides I can't avoid PA in other context, so it is pointless to try to
eliminate PA.
I think kmix needs to be updated somehow to be able to interact properly
with PA. I need to have a closer look at the code probably.
regards
2256
days inactive
2257
days old
4 comments
2 participants
participants (2)
-
deloptes -
Luke Kenneth Casson Leighton