New subject: [trinity-devel] New backend for the media:/ kioslave

1 Apr 2012

...
  >> I recently pushed a new (alpha quality)
backend for the
 >> media:/ kioslave which uses udev/pmount and therefore does not rely on
 >> HAL.  I encourage developers here to try it out!
 >>
 >> Please report failures to this list, not to the bugtracker,
 >> as it has not been tested much beyond mounting simple flash drives.
 >> Encryption support is buggy, but repairing it is my next task.
 >>
 >> Rhis will NOT be made default for R14.0 due to the vast
 >> array of hardware that it still needs to be tested on, but if your
 >> distribution no longer works with HAL it may be better than nothing even
...
  >> in this
 >> alpha form.
 >>
 >> To enable it, pass the -DWITH_TDEHWLIB="on" option to
 >> tdebase CMake.
 >>
 >> Enjoy!
 > 
Thank you Tim!

Works quite well for me, my HD partions are back in system:/media and after
installing pmount I can access my USB pen and external hard-drives.
Had a few crashes but nothing that compromises the usability, here are the
logs:

media kioslave: MediaProtocol::createMedium
media kioslave: url = media:/sda6, mime = media/hdd_mounted
media kioslave: MediaProtocol::listDir: media:/sda6
media kioslave: MediaList::findByName(sda6)
media kioslave: MediaImpl::slotMediumChanged:sdb1
kioslave: ####### CRASH ###### protocol = media pid = 31355 signal = 11

media kioslave: MediaProtocol::stat: media:/sdb1
media kioslave: MediaImpl::statMedium: sdb1
media kioslave: MediaList::findByName(sdb1)
media kioslave: MediaProtocol::createMedium
media kioslave: url = media:/sdb1, mime = media/removable_mounted
media kioslave: MediaProtocol::listDir: media:/sdb1/dwnl
media kioslave: MediaList::findByName(sdb1)
media kioslave: MediaImpl::slotMediumChanged:sdb1
kioslave: ####### CRASH ###### protocol = media pid = 31658 signal = 11

media kioslave: MediaProtocol::listDir: media:/sdb1/films
media kioslave: MediaList::findByName(sdb1)
media kioslave: MediaImpl::slotMediumChanged:sdb1
kioslave: ####### CRASH ###### protocol = media pid = 31979 signal = 11

media kioslave: MediaProtocol::createMedium
media kioslave: url = media:/sdb1, mime = media/removable_unmounted
media kioslave: MediaImpl::slotMediumChanged:sdb2
kioslave: ####### CRASH ###### protocol = media pid = 31920 signal = 11

Leandro 
 --
 Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP
autenticato? GRATIS solo con Email.it: http://www.email.it/f

 Sponsor:
 Conto Corrente Arancio. Carta di credito e prelievi gratis. Scopri i
vantaggi!
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=12248&d=20120401

 --
 Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP
autenticato? GRATIS solo con Email.it http://www.email.it/f

 Sponsor:
 Vuoi fare un regalo davvero originale? Su MisterCupido.com puoi crearlo tu! Personalizza
con le tue foto: quadri, tazze, puzzle, cuscini, peluche...
 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=11450&d=1-4

Re: [trinity-devel] New backend for the media:/ kioslave