16 Apr
2013
16 Apr
'13
4:29 p.m.
On Tue, 16 Apr 2013 11:09:18 -0500 "Calvin Morrison"
<mutantturkey(a)gmail.com> wrote:
Hi guys,
on my nightly builds, there are no filenames in konqueror!
Any ideas?
Yes. An improperly updated profile from 3.5.13->pre-R14.
There is a script at $PREFIX/bin/r14-xdg-update that is supposed to
run automoatically the first time $PREFIX/bin/starttde is run. That
is starttde and not startkde. If there were no problems then
~/.trinity/share/config/kdeglobals should have a new key entry:
[R14 XDG Updates]
Updated=true
You should also have seen several related stdout messages in your
user .xsession-error log.
You can run the r14-xdg-update script at any time.
* Log out of Trinity.
* Log in at a console (not xterm).
* Run '/opt/trinity/bin/r14-xdg-update force'
I believe only Slavek and I have done any serious testing of the
r14-xdg-update script. Possibly you have run into some new corner
cases that need to be added. Run the script with the force
parameter and observe the output messages.
Darrell
16 Apr
16 Apr
4:32 p.m.
New subject: [trinity-devel] konqueror no file names on nightly
interesting, because this is a clean install.
Why would the problem still occur in a clean installation?
Calvin
On 16 April 2013 12:29, Darrell Anderson <darrella(a)hushmail.com> wrote:
On Tue, 16 Apr 2013 11:09:18 -0500 "Calvin
Morrison"
<mutantturkey(a)gmail.com> wrote:
Hi guys,
on my nightly builds, there are no filenames in konqueror!
Any ideas?
Yes. An improperly updated profile from 3.5.13->pre-R14.
There is a script at $PREFIX/bin/r14-xdg-update that is supposed to
run automoatically the first time $PREFIX/bin/starttde is run. That
is starttde and not startkde. If there were no problems then
~/.trinity/share/config/kdeglobals should have a new key entry:
[R14 XDG Updates]
Updated=true
You should also have seen several related stdout messages in your
user .xsession-error log.
You can run the r14-xdg-update script at any time.
* Log out of Trinity.
* Log in at a console (not xterm).
* Run '/opt/trinity/bin/r14-xdg-update force'
I believe only Slavek and I have done any serious testing of the
r14-xdg-update script. Possibly you have run into some new corner
cases that need to be added. Run the script with the force
parameter and observe the output messages.
Darrell
---------------------------------------------------------------------
To unsubscribe, e-mail:
trinity-devel-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail:
trinity-devel-help(a)lists.pearsoncomputing.net
Read list messages on the web archive:
http://trinity-devel.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
4:34 p.m.
New subject: [trinity-devel] konqueror no file names on nightly
Dne út 16. dubna 2013 Calvin Morrison napsal(a):
interesting, because this is a clean install.
Why would the problem still occur in a clean installation?
Calvin
On 16 April 2013 12:29, Darrell Anderson <darrella(a)hushmail.com> wrote:
> On Tue, 16 Apr 2013 11:09:18 -0500 "Calvin Morrison"
>
> <mutantturkey(a)gmail.com> wrote:
> >Hi guys,
> >
> >on my nightly builds, there are no filenames in konqueror!
> >
> >Any ideas?
>
> Yes. An improperly updated profile from 3.5.13->pre-R14.
>
> There is a script at $PREFIX/bin/r14-xdg-update that is supposed to
> run automoatically the first time $PREFIX/bin/starttde is run. That
> is starttde and not startkde. If there were no problems then
> ~/.trinity/share/config/kdeglobals should have a new key entry:
>
> [R14 XDG Updates]
> Updated=true
>
> You should also have seen several related stdout messages in your
> user .xsession-error log.
>
> You can run the r14-xdg-update script at any time.
>
> * Log out of Trinity.
> * Log in at a console (not xterm).
> * Run '/opt/trinity/bin/r14-xdg-update force'
>
> I believe only Slavek and I have done any serious testing of the
> r14-xdg-update script. Possibly you have run into some new corner
> cases that need to be added. Run the script with the force
> parameter and observe the output messages.
>
> Darrell
>
It may be associated with bug #1456?
http://bugs.pearsoncomputing.net/show_bug.cgi?id=1456
Slavek
--
4:36 p.m.
New subject: [trinity-devel] konqueror no file names on nightly
I don't think so, I don't even have the gtk engine installed.
Calvin
On 16 April 2013 12:34, Slávek Banko <slavek.banko(a)axis.cz> wrote:
Dne út 16. dubna 2013 Calvin Morrison napsal(a):
interesting, because this is a clean install.
Why would the problem still occur in a clean installation?
Calvin
On 16 April 2013 12:29, Darrell Anderson <darrella(a)hushmail.com> wrote:
> On Tue, 16 Apr 2013 11:09:18 -0500 "Calvin Morrison"
>
> <mutantturkey(a)gmail.com> wrote:
> >Hi guys,
> >
> >on my nightly builds, there are no filenames in konqueror!
> >
> >Any ideas?
>
> Yes. An improperly updated profile from 3.5.13->pre-R14.
>
> There is a script at $PREFIX/bin/r14-xdg-update that is supposed to
> run automoatically the first time $PREFIX/bin/starttde is run. That
> is starttde and not startkde. If there were no problems then
> ~/.trinity/share/config/kdeglobals should have a new key entry:
>
> [R14 XDG Updates]
> Updated=true
>
> You should also have seen several related stdout messages in your
> user .xsession-error log.
>
> You can run the r14-xdg-update script at any time.
>
> * Log out of Trinity.
> * Log in at a console (not xterm).
> * Run '/opt/trinity/bin/r14-xdg-update force'
>
> I believe only Slavek and I have done any serious testing of the
> r14-xdg-update script. Possibly you have run into some new corner
> cases that need to be added. Run the script with the force
> parameter and observe the output messages.
>
> Darrell
>
It may be associated with bug #1456?
http://bugs.pearsoncomputing.net/show_bug.cgi?id=1456
Slavek
--
---------------------------------------------------------------------
To unsubscribe, e-mail:
trinity-devel-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail:
trinity-devel-help(a)lists.pearsoncomputing.net
Read list messages on the web archive:
http://trinity-devel.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
4:42 p.m.
New subject: [trinity-devel] konqueror no file names on nightly
Dne út 16. dubna 2013 Calvin Morrison napsal(a):
I don't think so, I don't even have the gtk
engine installed.
Calvin
>
> It may be associated with bug #1456?
> http://bugs.pearsoncomputing.net/show_bug.cgi?id=1456
>
> Slavek
> --
>
I know - problems with gtk-qt-engine I watched on v3.5.13-sru branch. Tim
reported major problems: "I am seeing this as well, though on my system
the effects are far worse leading to TDE becoming unusable."
Slavek
--
4:40 p.m.
New subject: [trinity-devel] konqueror no file names on nightly
Dne út 16. dubna 2013 Darrell Anderson napsal(a):
You can run the r14-xdg-update script at any time.
* Log out of Trinity.
* Log in at a console (not xterm).
* Run '/opt/trinity/bin/r14-xdg-update force'
I believe only Slavek and I have done any serious testing of the
r14-xdg-update script. Possibly you have run into some new corner
cases that need to be added. Run the script with the force
parameter and observe the output messages.
Darrell
Darrell,
I have one small suggestion. Script r14-xdg-update writes to the
configuration key Updated. If the script could contain internal version
number (or timestamp), it could to key Updated write this value and then
this value use to decide whether to execute again or not.
Such solution could cover any subsequent updates. And it would not depend
on testing the specific renamed files. What do you think?
Slavek
--
4313
days inactive
4313
days old
5 comments
3 participants
participants (3)
-
Calvin Morrison -
Darrell Anderson -
Slávek Banko