tde-devels

devels@trinitydesktop.org

3 participants
3808 discussions

TQt3/kipi-plugins build errors
by Darrell Anderson 20 Feb '12

20 Feb '12

Today I am building packages using TQt3 rather than Qt3. Overall, a good day but I encountered some errors I did not experience with Qt3. ====================================================== kipi-plugins: Making all in slideshow make[3]: Entering directory `/dev/shm/kipi-plugins/kipi-plugins/slideshow' rm -rf slideshowconfigbase.h; /usr/bin/uic-tqt -L /opt/trinity/lib/trinity/plugins/designer -nounload ./slideshowconfigbase.ui | /usr/bin/perl -pi -e "s,public TQWizard,public KWizard,g; s,#include <ntqwizard.h>,#include <kwizard.h>,g; s,public QWizard,public KWizard,g; s,#include <qwizard.h>,#include <kwizard.h>,g" >> slideshowconfigbase.h ; /usr/bin/tmoc ./listimageitems.h -o listimageitems.moc /bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -I../../kipi-plugins/common/include -I/opt/trinity/include -I/opt/trinity/include -I/opt/trinity/include -I. -include tqt.h -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i486 -mtune=i686 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -I/usr/include/tqt -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -MT listimageitems.lo -MD -MP -MF .deps/listimageitems.Tpo -c -o listimageitems.lo listimageitems.cpp mkdir .libs g++ -DHAVE_CONFIG_H -I. -I../.. -I../../kipi-plugins/common/include -I/opt/trinity/include -I/opt/trinity/include -I/opt/trinity/include -I. -include tqt.h -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i486 -mtune=i686 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -I/usr/include/tqt -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -MT listimageitems.lo -MD -MP -MF .deps/listimageitems.Tpo -c listimageitems.cpp -fPIC -DPIC -o .libs/listimageitems.o mv -f .deps/listimageitems.Tpo .deps/listimageitems.Plo /usr/bin/tmoc ./plugin_slideshow.h -o plugin_slideshow.moc /bin/sh ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -I../../kipi-plugins/common/include -I/opt/trinity/include -I/opt/trinity/include -I/opt/trinity/include -I. -include tqt.h -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i486 -mtune=i686 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -I/usr/include/tqt -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -MT plugin_slideshow.lo -MD -MP -MF .deps/plugin_slideshow.Tpo -c -o plugin_slideshow.lo plugin_slideshow.cpp g++ -DHAVE_CONFIG_H -I. -I../.. -I../../kipi-plugins/common/include -I/opt/trinity/include -I/opt/trinity/include -I/opt/trinity/include -I. -include tqt.h -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -DNDEBUG -DNO_DEBUG -O2 -O2 -march=i486 -mtune=i686 -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -I/usr/include/tqt -DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -MT plugin_slideshow.lo -MD -MP -MF .deps/plugin_slideshow.Tpo -c plugin_slideshow.cpp -fPIC -DPIC -o .libs/plugin_slideshow.o In file included from /opt/trinity/include/kfileitem.h:31, from /opt/trinity/include/kio/previewjob.h:27, from slideshowconfig.h:35, from plugin_slideshow.cpp:63: /opt/trinity/include/kfilemetainfo.h:1237: warning: type qualifiers ignored on function return type In file included from slideshowconfig.h:45, from plugin_slideshow.cpp:63: slideshowconfigbase.h:111: error: 'QListBoxItem' has not been declared slideshowconfigbase.h:112: error: ISO C++ forbids declaration of 'QPixmap' with no type slideshowconfigbase.h:112: error: expected ',' or '...' before '&' token make[3]: *** [plugin_slideshow.lo] Error 1 make[3]: Leaving directory `/dev/shm/kipi-plugins/kipi-plugins/slideshow' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/dev/shm/kipi-plugins/kipi-plugins' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/dev/shm/kipi-plugins' make: *** [all] Error 2 ====================================================== Darrell

1 0

TQt3/tdesdk build errors
by Darrell Anderson 19 Feb '12

19 Feb '12

Today I am building packages using TQt3 rather than Qt3. Overall, a good day but I encountered some errors I did not experience with Qt3. ====================================================== tdesdk: [ 4%] Building CXX object cervisia/CMakeFiles/cervisia-static.dir/qttableview.cpp.o cd /dev/shm/tdesdk.build/cervisia && /usr/bin/c++ -DHAVE_CONFIG_H -D_BSD_SOURCE -O2 -march=i486 -mtune=i686 -DQT_NO_ASCII_CAST -DQT_CLEAN_NAMESPACE -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_THREAD_SUPPORT -D_REENTRANT -include tqt.h -I/dev/shm/tdesdk.build/cervisia -I/dev/shm/tdesdk.build/cervisia/cvsservice -I/opt/trinity/include -I/usr/include/tqt -fPIC -o CMakeFiles/cervisia-static.dir/qttableview.cpp.o -c /dev/shm/tdesdk/cervisia/qttableview.cpp /dev/shm/tdesdk/cervisia/qttableview.cpp: In member function 'void QtTableView::coverCornerSquare(bool)': /dev/shm/tdesdk/cervisia/qttableview.cpp:1076: error: 'Q_CHECK_PTR' was not declared in this scope /dev/shm/tdesdk/cervisia/qttableview.cpp: In member function 'TQScrollBar* QtTableView::verticalScrollBar() const': /dev/shm/tdesdk/cervisia/qttableview.cpp:1451: error: 'Q_CHECK_PTR' was not declared in this scope /dev/shm/tdesdk/cervisia/qttableview.cpp: In member function 'TQScrollBar* QtTableView::horizontalScrollBar() const': /dev/shm/tdesdk/cervisia/qttableview.cpp:1483: error: 'Q_CHECK_PTR' was not declared in this scope make[2]: *** [cervisia/CMakeFiles/cervisia-static.dir/qttableview.cpp.o] Error 1 make[2]: Leaving directory `/dev/shm/tdesdk.build' make[1]: *** [cervisia/CMakeFiles/cervisia-static.dir/all] Error 2 make[1]: Leaving directory `/dev/shm/tdesdk.build' make: *** [all] Error 2 ====================================================== Darrell

1 0

Understanding GIT
by Darrell Anderson 19 Feb '12

19 Feb '12

In the wiki is the following: ==================================== To commit all changes made to the complete source tree cd <top level tde directory> ./scripts/commit_all_submodules To commit changes in the current repository to the TDE servers git commit -a git push origin master ==================================== What is the difference between the two commands and when is each appropriate? Darrell

2 1

TQt3/tdegraphics build errors
by Darrell Anderson 19 Feb '12

19 Feb '12

Today I am building packages using TQt3 rather than Qt3. Overall, a good day but I encountered some errors I did not experience with Qt3. ====================================================== tdegraphics: [ 10%] Building CXX object kghostview/CMakeFiles/kghostviewlib-shared.dir/kgvshell.cpp.o cd /dev/shm/tdegraphics.build/kghostview && /usr/bin/c++ -Dkghostviewlib_shared_EXPORTS -DHAVE_CONFIG_H -O2 -march=i486 -mtune=i686 -DQT_NO_ASCII_CAST -DQT_CLEAN_NAMESPACE -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION -DQT_THREAD_SUPPORT -D_REENTRANT -include tqt.h -fPIC -I/dev/shm/tdegraphics.build/kghostview -I/dev/shm/tdegraphics/kghostview/dscparse -I/dev/shm/tdegraphics.build -I/opt/trinity/include -I/usr/include/tqt -o CMakeFiles/kghostviewlib-shared.dir/kgvshell.cpp.o -c /dev/shm/tdegraphics/kghostview/kgvshell.cpp /dev/shm/tdegraphics/kiconedit/utils.cpp: In function 'void setupImageHandlers()': /dev/shm/tdegraphics/kiconedit/utils.cpp:40: error: 'Q_CHECK_PTR' was not declared in this scope make[2]: *** [kiconedit/CMakeFiles/kiconedit.dir/utils.cpp.o] Error 1 make[2]: Leaving directory `/dev/shm/tdegraphics.build' ... In file included from /dev/shm/tdegraphics/kghostview/kgvshell.cpp:35: /opt/trinity/include/kedittoolbar.h:271: warning: 'KEditToolbarWidget' has a field 'KEditToolbarWidget::m_inactiveList' whose type uses the anonymous namespace /opt/trinity/include/kedittoolbar.h:271: warning: 'KEditToolbarWidget' has a field 'KEditToolbarWidget::m_activeList' whose type uses the anonymous namespace /dev/shm/tdegraphics/kghostview/kgvdocument.cpp: In member function 'void KGVDocument::doOpenFile()': /dev/shm/tdegraphics/kghostview/kgvdocument.cpp:131: error: 'Q_CHECK_PTR' was not declared in this scope /dev/shm/tdegraphics/kghostview/kgvdocument.cpp: In member function 'bool KGVDocument::uncompressFile()': /dev/shm/tdegraphics/kghostview/kgvdocument.cpp:199: error: 'Q_CHECK_PTR' was not declared in this scope make[2]: *** [kghostview/CMakeFiles/kghostviewlib-shared.dir/kgvdocument.cpp.o] Error 1 ====================================================== Darrell

1 0

TQt3/tdebinding build errors
by Darrell Anderson 19 Feb '12

19 Feb '12

Today I am building packages using TQt3 rather than Qt3. Overall, a good day but I encountered some errors I did not experience with Qt3. ====================================================== tdebindings: Still a mess! These are typical errors --- too many to post, but similar to those when building against Qt3. DCOP.xs:29:20: error: qpoint.h: No such file or directory DCOP.xs:30:19: error: qrect.h: No such file or directory DCOP.xs:31:21: error: qregexp.h: No such file or directory DCOP.xs:32:19: error: qsize.h: No such file or directory DCOP.xs:33:25: error: qstringlist.h: No such file or directory In file included from DCOP.xs:35: /opt/trinity/include/dcopclient.h:26:22: error: tqobject.h: No such file or directory /opt/trinity/include/dcopclient.h:27:23: error: tqcstring.h: No such file or directory /opt/trinity/include/dcopclient.h:28:25: error: tqvaluelist.h: No such file or directory /opt/trinity/include/dcopclient.h:29:22: error: tqstring.h: No such file or directory In file included from /opt/trinity/include/dcopclient.h:30, from DCOP.xs:35: /opt/trinity/include/kdatastream.h:4:26: error: tqdatastream.h: No such file or directory In file included from /opt/trinity/include/dcopclient.h:31, from DCOP.xs:35: /opt/trinity/include/tdelibs_export.h:27:22: error: tqglobal.h: No such file or directory In file included from /opt/trinity/include/dcopclient.h:30, from DCOP.xs:35: /opt/trinity/include/kdatastream.h:23: error: expected initializer before '&' token /opt/trinity/include/kdatastream.h:32: error: expected initializer before '&' token /opt/trinity/include/kdatastream.h:40: error: expected initializer before '&' token /opt/trinity/include/kdatastream.h:49: error: expected initializer before '&' token ====================================================== Darrell

1 0

Built on qt3 currently -- which dbus? dbus-1-qt3 or dbus-1-tqt and dbus-tqt
by David C. Rankin 19 Feb '12

19 Feb '12

Guys, Building from git (based on Qt3 currently) I have gotten to dbus, but now I'm confused on which dbus-1 I need. In tde-packaging for arch there is: trinity-dbus-1-qt3 trinity-dbus-tqt trinity-dbus-tqt-1 I originally thought that trinity-dbus-1-qt3 would fit my build since I used the Qt3 source from git, but there is no source for it in the tde/main/dependencies tree for trinity-dbus-1-qt3. What to do? Will the dbus-tqt files work when built on top of Qt3 instead of TQt3? -- David C. Rankin, J.D.,P.E.

3 3

k3b, koffice not building for me
by Jay 19 Feb '12

19 Feb '12

Ok so i have successfully compiled the base of Trinity using Qt3 and everything in /usr. A while back i also successfully compiled many of the 'applications' from the applications folder. Today i am having no such luck. I am pushing out a release candidate of Porteus this weekend with a 'skin & bones' version of Trinity that successfully compiled a few weeks ago. The problem is that koffice is no longer compiling for me, and neither is k3b. I have booted using the Trinity-3.5.13 that i compiled and when trying to build k3b, here is my output. In file included from k3bglobals.cpp:28:0: /usr/include/tdeversion.h:57:5: error: ‘TDECORE_EXPORT’ does not name a type /usr/include/tdeversion.h:64:5: error: ‘TDECORE_EXPORT’ does not name a type /usr/include/tdeversion.h:71:5: error: ‘TDECORE_EXPORT’ does not name a type /usr/include/tdeversion.h:78:5: error: ‘TDECORE_EXPORT’ does not name a type /usr/include/tdeversion.h:84:5: error: ‘TDECORE_EXPORT’ does not name a type k3bglobals.cpp: In function ‘KIO::filesize_t K3b::imageFilesize(const KURL&)’: k3bglobals.cpp:304:126: warning: ‘static bool KIO::NetAccess::exists(const KURL&, bool)’ is deprecated (declared at /usr/include/kio/netaccess.h:282) k3bglobals.cpp: In function ‘bool K3b::mount(K3bDevice::Device*)’: k3bglobals.cpp:601:74: warning: converting ‘false’ to pointer type for argument 1 of ‘QString::QString(const char*)’ make[3]: *** [k3bglobals.lo] Error 1 make[3]: Leaving directory `/tmp/k3b/libk3b/core' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/tmp/k3b/libk3b' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/tmp/k3b' make: *** [all] Error 2 Hoping someone more intelligent than i can point m in the right direction. J

2 5

How to build one package component only
by Darrell Anderson 19 Feb '12

19 Feb '12

Every package has a doc directory containing the documentation files. How do I build only that directory as a mini package? Reason: All Trinity documentation is contained in Docbook files. DocBook is a markup language. Quanta Plus and Kate provide no mechanism to view the final result because all Docbook files have to be converted to another form for viewing. As I revise the various docbook files, I want to regularly view the results in a Trinity desktop. I want to do this quickly without building an entire package. Side note: Basically, this is the beginning of a discussion about creating an efficient Docbook editing environment, which I'll post to the wiki. If you have any experience or interest in the development side of Docbook then please feel welcome to help. You don't have to write or edit, just help set up the environment and I'll document the process for everybody --- but I need help getting there. :) Thanks! Darrell

4 3

Need image conversion help
by Darrell Anderson 19 Feb '12

19 Feb '12

Okay artists, please help! I'm working on the TDE user guide. I need some image conversion help. I want to convert some 24-bit PNG images to "locolor." What does "locolor" mean? These are not icons but full images, in case that makes a difference. Is there a definition somewhere of "locolor"? How do I convert/save a 24-bit image as "locolor"? Of all of the various TDE image viewers, how do I view an image's properties to learn about the color depth, etc.? I have tried several (kolourpaint, krita, showfoto, gwenview). I am missing the big picture altogether, probably because I don't know the terminology. Thanks! Darrell

4 4

Arch - pkgbuild tarball for git qt3 w/patchfile updated for latest qt3
by David C. Rankin 19 Feb '12

19 Feb '12

Calvin, Baho, Pawel, I have a tarball with the PKGBUILD, install and updated patches file for qt3 in git here: http://www.3111skyline.com/dl/dt/trinity/arch/git/trinity-qt3-git.tar.gz 2 patches were removed from qt-patches.tar.bz2 The git source 'dependencies-qt3' was created with the automated .tar.gz creation script which essentially did: cd tde/main/dependencies tar -czf dependencies-qt3.tar.gz qt3/ I don't think I have commit privileges on the trinity-packaging git repo. I did on svn, but don't with git that I know of. Tim, what do I need to do to get commit privileges for the arch repo? -- David C. Rankin, J.D.,P.E.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

tde-devels