8 Mar
2024
8 Mar
'24
7:53 a.m.
Hi all!
Does anybody know which part of TDE controls XF86RaiseVolume / XF86LowerVolume? I need to
remap these 2 keys to XF86LaunchA / XF86LaunchB but TDE always answers with the OSD volume
bar, even when I remap the beys with xmodmap ...
Nik
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
8 Mar
8 Mar
7:09 p.m.
On 2024/03/09 12:53 AM, Dr. Nikolaus Klepp via tde-users wrote:
Hi all!
Does anybody know which part of TDE controls XF86RaiseVolume / XF86LowerVolume? I need to
remap these 2 keys to XF86LaunchA / XF86LaunchB but TDE always answers with the OSD volume
bar, even when I remap the beys with xmodmap ...
Nik
Hi Nik,
tqt3 maps XF86XK_AudioRaiseVolume to TQt::Key_VolumeUp and equivalently for
XF86XK_AudioLowerVolume. Those TQt keys are
then used by KMilo to control the volume up/down and the related OSD visualization.
Hope this helps
Cheers
Michele
9 Mar
9 Mar
12:46 a.m.
H Michele,
Anno domini 2024 Sat, 9 Mar 12:09:47 +0900
Michele Calgaro via tde-users scripsit:
On 2024/03/09 12:53 AM, Dr. Nikolaus Klepp via
tde-users wrote:
Yes, this helps a lot. I did not realizie that kmilo grabs keys before khotkeys sees them.
The workaround would be to uninstall kmilo.
But is there a way to reverse that order, so khotkeys sees and grabs the keys before kmilo
does ?
Nik
Hi all!
Does anybody know which part of TDE controls XF86RaiseVolume / XF86LowerVolume? I need to
remap these 2 keys to XF86LaunchA / XF86LaunchB but TDE always answers with the OSD volume
bar, even when I remap the beys with xmodmap ...
Nik
Hi Nik,
tqt3 maps XF86XK_AudioRaiseVolume to TQt::Key_VolumeUp and equivalently for
XF86XK_AudioLowerVolume. Those TQt keys are
then used by KMilo to control the volume up/down and the related OSD visualization.
Hope this helps Cheers
Michele
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
1:13 a.m.
On 2024/03/09 05:46 PM, Dr. Nikolaus Klepp via tde-users wrote:
Yes, this helps a lot. I did not realizie that kmilo
grabs keys before
khotkeys sees them. The workaround would be to uninstall kmilo.
But is there a way to reverse that order, so khotkeys sees and grabs the
keys before kmilo does ?
That is not entirily correct. Both KMilo and KHotkeys use global accelerators.
Depending on which one run first, the same key could be handle by one or the other. I
played around a bit with the
"lower volume" key and by stop/starting kmilo or by enabling/disabling a khotkey
action, I could get the button to
respond to the first or the second program. What is really needed is a way to change the
hotkeys used by kmilo from the
TDE control panel (I thought this was already possible but I can't seem to find it
anymore).
Cheers
Michele
2:38 a.m.
Anno domini 2024 Sat, 9 Mar 18:13:20 +0900
Michele Calgaro via tde-users scripsit:
On 2024/03/09 05:46 PM, Dr. Nikolaus Klepp via
tde-users wrote:
Interesting. I managed to get XF86LowerVolume be handled by xbindkeys, but not
XF86UpperVolume. I cannot enable/disable kmilo using the TDE control panel. There is a
kmilo checkmark unter "IBM Notebooks", but it is enabled and greyed out.
Nik
Yes, this helps a lot. I did not realizie that
kmilo grabs keys before
khotkeys sees them. The workaround would be to uninstall kmilo.
But is there a way to reverse that order, so khotkeys sees and grabs the
keys before kmilo does ?
That is not entirily correct. Both KMilo and KHotkeys use global accelerators.
Depending on which one run first, the same key could be handle by one or the other. I
played around a bit with the
"lower volume" key and by stop/starting kmilo or by enabling/disabling a
khotkey action, I could get the button to
respond to the first or the second program. What is really needed is a way to change the
hotkeys used by kmilo from the
TDE control panel (I thought this was already possible but I can't seem to find it
anymore).
Cheers
Michele
--
Please do not email me anything that you are not comfortable also sharing with the NSA,
CIA ...
4:38 a.m.
On 2024/03/09 07:38 PM, Dr. Nikolaus Klepp via tde-users wrote:
I cannot enable/disable kmilo using the TDE control
panel. There is a
kmilo checkmark unter "IBM Notebooks", but it is enabled and greyed out.
Hi Nik,
in TCC -> TDE Components -> Service manager, you can enable/disable and start/stop
kmilo in the bottom half of the module.
Cheers
Michele
67
days inactive
68
days old
5 comments
2 participants
participants (2)
-
Dr. Nikolaus Klepp -
Michele Calgaro