Hi
I'm trying to get skype sound to work but apparently the monkeys at MS removed
alsa support and replaced it with pulse, which is rubbish. Even though I have
pulse enable (pclos - ali's remaster), it still doesn't show up. Is there a
fix to re-enable alsa or the like?
Kate
Hi there.
I've got a really great Amarok playlist of songs that I find help me
concentrate.
I've looked for a means of playing such a playlist on Android without
success.
If anyone has succeeded in porting a TDE program to Android it would
maybe bring this dream a little closer.
Please tell me I'm not the only one with such a dream :)
Regards,
Philip Ashmore
Hi all,
I have TDE 3.5.13.2 installed on Debian 7.10. Some time ago (probably after one of security
updates) my KPowerSave stopped working - it does not allow me to set power scheme nor does it
recognize whether the laptop is running on battery or A/C. These features still work in other
programs (eg. htop recognizes whether I am running on battery or A/C, I can use cpufreq-set to
set CPU speed) so this is not a system-wide breakage. Does anyone have any ideas what might be
wrong?
Janek
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez pomyłkę
prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or if you have received this message in error,
please notify the sender and delete it from your system.
Hello,
This is the second time that I have this message on boot of TDE :
"There was an error setting up interprocess for TDE.
Could not read network connection list
~/..DCOP server_debian-room_0
Please check thant the DCOP server is running !"
I press OK and no bad result after booting on TDE.
What happens et what to do to avoid the message ?
Thanks by advance.
André
---- On Wed, 20 Apr 2016 20:40:16 +0200 Kate Draven <borglabs4(a)gmail.com> wrote ----
HI Alessandro
Try removing all the temp files. On both the host and the guest.
Reboot and try again.
It's just a guess based on a previous experience with TDE.
Good luck lad,
Kate
Hi Kate,
I tried as you suggested with no success, but I believe I found out the issue.
Before login in TDM, I selected "Safe Session" and tried login which failed (as almost expected); so I selected "TDE" session again and it worked (even if I do not why).
Anyway, thanks for the help.
Cheers,
Alessandro
---- On Thu, 21 Apr 2016 14:20:54 +0200 Kate Draven <borglabs4(a)gmail.com> wrote ----
Hi.
Check perms. From the root command line.
chown -R user:user /home/user
Good luck,
Kate
Hi,
that tip is always worth and I had already tried that but thanks for remind ;)
Cheers,
Alessandro
Hi all,
I've installed TDE 14.0.3 on CentOS 6.7 64bit (KVM guest VM) but cannot login on the system.
I looked into /var/log/tdm.log file for errors:
TQThreadInstance::finish: In TQThreadInstance::finish for thread 0x1d73400
TQObject::moveToThread: Cannot move objects with a parent
[tdeinit] Fatal IO error: client killed
[tdelauncher] Exiting on signal 15
Disabling FB access for 0
8 XSELINUXs still allocated at reset
SCREEN: 0 objects of 320 bytes = 0 total bytes 0 private allocs
DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
CLIENT: 0 objects of 184 bytes = 0 total bytes 0 private allocs
WINDOW: 0 objects of 48 bytes = 0 total bytes 0 private allocs
PIXMAP: 3 objects of 24 bytes = 72 total bytes 0 private allocs
GC: 4 objects of 16 bytes = 64 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
TOTAL: 8 objects, 144 bytes, 0 allocs
3 PIXMAPs still allocated at reset
PIXMAP: 3 objects of 24 bytes = 72 total bytes 0 private allocs
GC: 4 objects of 16 bytes = 64 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
TOTAL: 8 objects, 144 bytes, 0 allocs
4 GCs still allocated at reset
GC: 4 objects of 16 bytes = 64 total bytes 0 private allocs
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
TOTAL: 5 objects, 72 bytes, 0 allocs
1 CURSORs still allocated at reset
CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
TOTAL: 1 objects, 8 bytes, 0 allocs
1 CURSOR_BITSs still allocated at reset
GLYPH: 0 objects of 8 bytes = 0 total bytes 0 private allocs
TOTAL: 0 objects, 0 bytes, 0 allocs
resizing surface0 to 16777216
memory space from 0x7f97afd88000 to 0x7f97b2d85000
memory space from 0x7f97aad88000 to 0x7f97aed88000
slots start: 1, slots end: 7
done reset
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
[tdekbdledsync] Another instance of this program is already running on this X11 display!
[tdekbdledsync] Lockfile detected at '/var/lock/tdekbdledsync-:0.lock'
/usr/bin/iceauth: creating new authority file /tmp/1497696536/.ICEauthority
[tdebuildsycoca] tdebuildsycoca running...
Invalid entry (missing '=') at /tmp/1497696536/.trinity/tmp-centos67/tdeconf_updateRTihqR.tmp:1
Invalid entry (missing '=') at /tmp/1497696536/.trinity/tmp-centos67/tdeconf_updatehJADXf.tmp:1
tdelauncher: Fatal IO error: client killed
kded: Fatal IO error: client killed
---------------------------------
[dcopserver] It looks like dcopserver is already running. If you are sure
that it is not already running, remove /tmp/1497696536/.DCOPserver_centos67__0
and start dcopserver again.
---------------------------------
TQThreadInstance::start: Setting thread storage to 0x1184f50
TQObject::activate_signal: Invoking cross-thread method from object 0x11815c0 (member 2 receiver 0x1184420) (1)
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
SELinux is in permissive mode, so it should not
Thanks anyone for the help,
Alessandro
Hi,
I'm trying to compile kdebindings, so I can start programming in python.
First of all, not having a configure or CMakeList.txt file is confusing,
and I really don't know how to compile it.
But besides, python/README says:
----
PyQt may be downloaded from this URL:
http://www.riverbankcomputing.co.uk/software/pyqt/download3
----
That URL no longer exists. They are now here:
https://sourceforge.net/projects/pyqt/files/
So, Should I install pyqt3, pykde3 and sip from there?
Cheers,
-- Diego.
