Trinity 14.0.6 preliminary.
Don't know if it is a feature of ksnapshot or a misconfiguration
somewhere from me, but it is getting absolutely annoying what happens.
I have a website, a document or whatsoever on my screen in full
A4-papersize. Now I want a printout of a small part of it. Call
ksnapshot, choose "region" "new snapshot" and then draw a border around
the desired part. Press "print" and then print it. Bull... I get a
print in landscape, useless and even worse not even the original layout
reappears.
Stop ksnapshot, restart it and same procedure with again the same
miserable result.
Stop, restart, same procedure but no actual printing, instead I look
into the printer properties. And there, big surprise, landscape was
marked as to be printed BUT all 4 orientations were grayed out, so I
couldn't change that.
Checked in tdeprint the printersettings, nothing wrong, in "instances"
"settings" all 4 orientations were available and portrait was marked as
to be applied in the default printer.
Checked kprinter and of course the settings of tdeprint were there also
valid.
But then I had an idea. If I selected in ksnapshot a larger part of the
screen, say more than half A4, what would happen?
Yes, some ugly words from me and there it was: portrait was marked but
still all 4 possibilities grayed out.
So ksnapshot decides how it wants to print and doesn't leave the user a
chance to get a result, that he wants. Utterly bull....
Any suggestion, where I could look to alter this behaviour?
Phiebie.
Hello,
Having problems with dependency on rocky-backgrounds and rocky-logos ....
I followed the steps in here ... https://wiki.trinitydesktop.org/RedHat_Trinity_Repository_Installation_Inst…
enabled EPEL, RPMFUSION, installed http://mirror.ppa.trinitydesktop.org/trinity/rpm/el9/trinity-r14/RPMS/noarc…
However, if I try to install trinity, I get the message:
[super@legendre ~]$ sudo yum install trinity-desktop-all
[sudo] password for super:
Last metadata expiration check: 0:29:58 ago on Tue 27 Dec 2022 06:14:48 PM -03.
Error:
Problem: package trinity-desktop-all-14.0.13-1.el9.noarch requires trinity-desktop = 14.0.13, but none of the providers can be installed
- package trinity-desktop-14.0.13-1.el9.noarch requires trinity-tdebase >= 14.0.13, but none of the providers can be installed
- conflicting requests
- nothing provides rocky-backgrounds needed by trinity-tdebase-14.0.13-1.el9.x86_64
- nothing provides rocky-logos needed by trinity-tdebase-14.0.13-1.el9.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
Tried to add --skip-broken and --nobest didn't help. Somehow the trinity for rhel9 depends on the rocky packages - that does not make any sense, does it?
What should I do?
Thanks for helping,
Ricardo
Hi all!
I just played around with tdevelop to build a simple test-application. However, I did not succeed. Is there anybody on the list who has actually used tdevelop to build a TQT3 or QT3 application that actually compiled and worked?
Nik
--
Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ...
Hi all,
some time ago I was thinking about whether we want to become an active
member of social networks with our project. Things like Facebook and
Twitter have always been "no go" zones for me. However, I've been
thinking about the Mastodon platform for a long time.
Mastodon is a decentralized platform for publishing short messages and
pictures. It is based on open source architecture and therefore this
platform is close to our ideas. You can see profiles of other projects
like @kde@floss.social, @gnome@floss.social, and others.
I assume that it would help to "make us visible" and information could be
published there, for example about the release of new versions, or some
useful information regarding development, screenshots, solving issues and
community info.
Does it seem like a good idea for us to have an official communication
channel for our project on Mastodon? What is your opinion on this?
Cheers
--
Slávek
Maybe an odd question?
Can you run two, or more, logins for the same user at the same time? (Say the
normal one on Crtl-Alt-F7 and an extra one on Crtl-Alt-F5?)
I have an app that behaves badly that I’d like to isolate to its own instance
of TDE. (There’s no fix for it and when it it goes bad it requires a desktop
restart.)
Doable? Or anyway to do something equivalent?
Thanks all,
Michael
Hello all,
As I allready mentioned, I am using MX-Linux at school. I have now installed
it on my laptop because it's the only Debian-based distribution I've found
where Gnome-Display-Networks is working - which let's me connect my machine
with a Microsoft Wireless dongle.
To stop any discussion: no, I won't use Ubuntu or Mint, so I haven't tested
those.
I have installed Trinity on MX and it works well, with one glitch:
- If I use TDM (dpkg-reconfigure tdm-trinity) there seem to be some problem at
shutdown, wich leads to - sometime, not always - a failure of X to start at
boot (I did not write down the message but it's something about a Plymouth
failure). If I log in (cli) and then start X it works.
- If I use lightdm there is no problem (except the less friendly greeter).
From all this, I have concluded that the problem is linked to the use of
Trinity's login screen. While I can live with lightdm, does anyone understand
what the problem with plymouth is, and/or if it's possible to get TDM's
greeter without plymouth? I seem to remember a time where plymouth had to be
installed only for some versions of the greeter - maybe I'm wrong.
Thierry
Hi everyone.
I have a last fail on my trinity install. Every book appear:
The application soundserver (artsd) chashed and caused signal 6 ( SIGABRT)
The next is the backtrace. Make refference to some failed symbol (maybe
shared library, wich library?)
The installed system is a opensuse tumbleweed and make this error from start.
If i configure "not sound server" the error dissapear, but kmix cant move the
volume.
Thanks to all, Best Regards
Christian
Backtrace:
This GDB supports auto-downloading debuginfo from the following URLs:
https://debuginfod.opensuse.org/
Enable debuginfod for this session? (y or [n]) [answered N; input not from
terminal]
Debuginfod has been disabled.
To make this setting permanent, add 'set debuginfod enabled off' to .gdbinit.
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
==== (gdb) bt ====
[TDECrash handler]
#3 0x00007fd55b5847ec in __pthread_kill_implementation ()
from /lib64/libc.so.6
#4 0x00007fd55b531816 in raise () from /lib64/libc.so.6
#5 0x00007fd55b51a81c in abort () from /lib64/libc.so.6
#6 0x00007fd55b51a72b in __assert_fail_base.cold () from /lib64/libc.so.6
#7 0x00007fd55b529c46 in __assert_fail () from /lib64/libc.so.6
#8 0x00007fd55b213a07 in snd_pcm_close () from /lib64/libasound.so.2
#9 0x00007fd55bd682e6 in ?? () from /opt/trinity/lib64/libartsflow.so.1
#10 0x00007fd55bd4b55a in Arts::AudioSubSystem::open() ()
from /opt/trinity/lib64/libartsflow.so.1
#11 0x00007fd55bd4b90d in Arts::AudioSubSystem::check() ()
from /opt/trinity/lib64/libartsflow.so.1
#12 0x0000000000411c2c in ?? ()
#13 0x00007fd55b51b5b0 in __libc_start_call_main () from /lib64/libc.so.6
#14 0x00007fd55b51b679 in __libc_start_main_impl () from /lib64/libc.so.6
#15 0x0000000000412785 in _start ()
==== (gdb) bt full ====
[TDECrash handler]
No symbol table info available.
#3 0x00007fd55b5847ec in __pthread_kill_implementation ()
from /lib64/libc.so.6
No symbol table info available.
#4 0x00007fd55b531816 in raise () from /lib64/libc.so.6
No symbol table info available.
#5 0x00007fd55b51a81c in abort () from /lib64/libc.so.6
No symbol table info available.
#6 0x00007fd55b51a72b in __assert_fail_base.cold () from /lib64/libc.so.6
No symbol table info available.
#7 0x00007fd55b529c46 in __assert_fail () from /lib64/libc.so.6
No symbol table info available.
#8 0x00007fd55b213a07 in snd_pcm_close () from /lib64/libasound.so.2
No symbol table info available.
#9 0x00007fd55bd682e6 in ?? () from /opt/trinity/lib64/libartsflow.so.1
No symbol table info available.
#10 0x00007fd55bd4b55a in Arts::AudioSubSystem::open() ()
from /opt/trinity/lib64/libartsflow.so.1
No symbol table info available.
#11 0x00007fd55bd4b90d in Arts::AudioSubSystem::check() ()
from /opt/trinity/lib64/libartsflow.so.1
No symbol table info available.
#12 0x0000000000411c2c in ?? ()
No symbol table info available.
#13 0x00007fd55b51b5b0 in __libc_start_call_main () from /lib64/libc.so.6
No symbol table info available.
#14 0x00007fd55b51b679 in __libc_start_main_impl () from /lib64/libc.so.6
No symbol table info available.
#15 0x0000000000412785 in _start ()
No symbol table info available.
==== (gdb) info thread ====
Id Target Id Frame
* 1 Thread 0x7fd55bcd90c0 (LWP 1834) "artsd" 0x00007fd55b5d09d7 in wait4 ()
from /lib64/libc.so.6
==== (gdb) thread apply all bt ====
==== Thread 1 (Thread 0x7fd55bcd90c0 (LWP 1834) "artsd"):
[TDECrash handler]
#3 0x00007fd55b5847ec in __pthread_kill_implementation ()
from /lib64/libc.so.6
#4 0x00007fd55b531816 in raise () from /lib64/libc.so.6
#5 0x00007fd55b51a81c in abort () from /lib64/libc.so.6
#6 0x00007fd55b51a72b in __assert_fail_base.cold () from /lib64/libc.so.6
#7 0x00007fd55b529c46 in __assert_fail () from /lib64/libc.so.6
#8 0x00007fd55b213a07 in snd_pcm_close () from /lib64/libasound.so.2
#9 0x00007fd55bd682e6 in ?? () from /opt/trinity/lib64/libartsflow.so.1
#10 0x00007fd55bd4b55a in Arts::AudioSubSystem::open() ()
from /opt/trinity/lib64/libartsflow.so.1
#11 0x00007fd55bd4b90d in Arts::AudioSubSystem::check() ()
from /opt/trinity/lib64/libartsflow.so.1
#12 0x0000000000411c2c in ?? ()
#13 0x00007fd55b51b5b0 in __libc_start_call_main () from /lib64/libc.so.6
#14 0x00007fd55b51b679 in __libc_start_main_impl () from /lib64/libc.so.6
#15 0x0000000000412785 in _start ()
==== (gdb) info sharedlibrary ====
From To Syms Read Shared Object Library
0x00007fd55be6d780 0x00007fd55be831b6 Yes
(*) /opt/trinity/lib64/libsoundserver_idl.so.1
0x00007fd55bd429b0 0x00007fd55bdb1c76 Yes
(*) /opt/trinity/lib64/libartsflow.so.1
0x00007fd55bca16e0 0x00007fd55bcb0d87 Yes
(*) /opt/trinity/lib64/libkmedia2_idl.so.1
0x00007fd55bbdbb50 0x00007fd55bc06c66 Yes
(*) /opt/trinity/lib64/libartsflow_idl.so.1
0x00007fd55bab4ef0 0x00007fd55bb07c52 Yes
(*) /opt/trinity/lib64/libmcop.so.1
0x00007fd55b8a9360 0x00007fd55b9a6fe2 Yes (*) /lib64/libstdc++.so.6
0x00007fd55b72c3c0 0x00007fd55b7a2908 Yes (*) /lib64/libm.so.6
0x00007fd55b6f8660 0x00007fd55b70ebf5 Yes (*) /lib64/libgcc_s.so.1
0x00007fd55b51a700 0x00007fd55b67fe8d Yes (*) /lib64/libc.so.6
0x00007fd55b4bb540 0x00007fd55b4df4cb Yes (*) /lib64/libaudiofile.so.1
0x00007fd55b468bf0 0x00007fd55b492356 Yes (*) /lib64/libjack.so.0
0x00007fd55b33deb0 0x00007fd55b3c94f2 Yes (*) /lib64/libglib-2.0.so.0
0x00007fd55ba3e430 0x00007fd55ba428ec Yes (*) /lib64/libvorbisfile.so.3
0x00007fd55b2f0600 0x00007fd55b306bff Yes (*) /lib64/libvorbis.so.0
0x00007fd55b2c62f0 0x00007fd55b2cf749 Yes (*) /lib64/libmad.so.0
0x00007fd55ba30870 0x00007fd55ba353a2 Yes (*) /lib64/libesd.so.0
0x00007fd55b1e9ab0 0x00007fd55b27d2d2 Yes (*) /lib64/libasound.so.2
0x00007fd55bebd0a0 0x00007fd55bee4145 Yes
(*) /lib64/ld-linux-x86-64.so.2
0x00007fd55b17d8e0 0x00007fd55b1ab023 Yes (*) /lib64/libFLAC.so.12
0x00007fd55b0bf280 0x00007fd55b13ff73 Yes (*) /lib64/libpcre2-8.so.0
0x00007fd55b0ae250 0x00007fd55b0b0575 Yes (*) /lib64/libogg.so.0
0x00007fd55ba5f570 0x00007fd55ba618e9 Yes
(*) /lib64/alsa-lib/libasound_module_pcm_pulse.so
0x00007fd55b00b800 0x00007fd55b038a02 Yes (*) /lib64/libpulse.so.0
0x00007fd55af8ce30 0x00007fd55afd18d2 Yes
(*) /usr/lib64/pulseaudio/libpulsecommon-16.1.so
0x00007fd55af2ce20 0x00007fd55af5929f Yes (*) /lib64/libdbus-1.so.3
0x00007fd55ae9ca30 0x00007fd55aef4dd3 Yes (*) /lib64/libsndfile.so.1
0x00007fd55ae71710 0x00007fd55ae83cd0 Yes (*) /lib64/libxcb.so.1
0x00007fd55ada4b50 0x00007fd55ae224e0 Yes (*) /lib64/libsystemd.so.0
0x00007fd55acf00b0 0x00007fd55acf25cc Yes (*) /lib64/libvorbisenc.so.2
0x00007fd55acbf260 0x00007fd55acd0e35 Yes (*) /lib64/libspeex.so.1
0x00007fd55ac5f3e0 0x00007fd55aca3adf Yes (*) /lib64/libopus.so.0
0x00007fd55ba55200 0x00007fd55ba55e82 Yes (*) /lib64/libXau.so.6
0x00007fd55ac4f4e0 0x00007fd55ac53a97 Yes (*) /lib64/libcap.so.2
0x00007fd55ab0c640 0x00007fd55abfa9de Yes (*) /lib64/libgcrypt.so.20
0x00007fd55aac8510 0x00007fd55aae8e75 Yes (*) /lib64/liblzma.so.5
0x00007fd55aa12780 0x00007fd55aaac1b2 Yes (*) /lib64/libzstd.so.1
0x00007fd55a9e7300 0x00007fd55aa02227 Yes (*) /lib64/liblz4.so.1
0x00007fd55a9c1550 0x00007fd55a9d5942 Yes (*) /lib64/libgpg-error.so.0
(*): Shared library is missing debugging information.
[Inferior 1 (process 1834) detached]
==== (tdehwlib) hardware information ====
CPU core number: 0
Vendor: AuthenticAMD
Model:
Name: AMD A9-9425 RADEON R5, 5 COMPUTE CORES 2C+3G
Current Frequency: 3692.64 MHz
Minimum Frequency: 1400 MHz
Maximum Frequency: 3100 MHz
CPU core number: 1
Vendor: AuthenticAMD
Model:
Name: AMD A9-9425 RADEON R5, 5 COMPUTE CORES 2C+3G
Current Frequency: 3692.71 MHz
Minimum Frequency: 1400 MHz
Maximum Frequency: 3100 MHz
--
Be Free, Be Linux
Hi all!
Does anybody know if there's a TDE way to replace <enter> with <shift>+<enter> for just one specific application windows? Reasomn is, that the last update broke OpenSCAD input: to vreate a new line it now requires <shift>+<enter> instead of <enter>, which is kind of strange.
Nik
--
Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ...
Hi Everyone:
I am trying of install some TDE applications or update others on tumbleweed.
The problem is a dependence compatibility problem. TDE require
Libjasper.so.6, but TW have Libjasper.so.7
Overriding the update warning the TDE works REASONABLY fine.
How i can solve the warnings? Thanks to all
Best Regards
Christian
--
Be Free, Be Linux
On Friday 09 December 2022 07.45:36 Dr. Nikolaus Klepp wrote:
> If "somebody" has the resources to mantain it, yes. At least it'd be a good
> try :)
>I have no reason to oppose, but I won't be there. I tried Mastodon and could
>not understand how that works - and I don't use my phone for messenging as
>far as I can.
>
>Thierry
I have never used Twitter. However, I do sometimes cheat and use nitter.org,
just to read what somebody posted, if it actually gets my attention.
Twitter never seemed worth the time, effort, or emotional investment, to
participate. I doubt Mastodon can be much better. Life is short.
And yet there are people who do use it, so it must be worthwhile to somebody
out there.
My question is, Why not just have our cake and eat it, too?
If we establish "an official communication channel for our project on
Mastodon" (quoting Slavek), does that mean that we must choose between them -
one or the other? Are they mutually exclusive?
We could have, say, an "unoffical communication channel" on Twitter; maybe not
the devs themselves, but there are lots of TDE users out there, and they
could take the message to the people on Twitter, the good news that there
really is a Linux desktop that is actually worth using.
Bill
