tde-users August 2011

users@trinitydesktop.org

25 participants
31 discussions

VMWARE player complains about libcanberra-gtk-module

by daniele.manghi＠libero.it

Good morning. I've installed vmplayer on my Maverick+Trinity. Installationrun ok, but vmplayer refuses to start the guest operating system telling it is missing libcanberra-gtk-module.so. However, if try to installlibcanberra-gtk-module using apt-get, this one tells that the package is alreadyinstalled and at the most recent level. Besides, a 'locate' run finds /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.soso, what's really the problem ? Do you know if there is a way to bypass it ? ThanksDaniele Manghi

12 years, 8 months

kdm authentication failures

by Alan

Hello, I can't get kdm to authenticate my user. I built kdebase from revision 1236975, and I configured it as follows: mkdir build; cd build cmake .. \ -DCMAKE_INSTALL_PREFIX=/usr \ -DCMAKE_BUILD_TYPE=Release \ -DBUILD_ALL=On \ -DBUILD_DOC=Off \ -DWITH_SHADOW=On Yet I am unable to authenticate my user. This system doesn't have pam. This used to work with kde 3.5.10 when I ran configure with --with-shadow. Suggestions?

12 years, 9 months

R: Re: [trinity-users] Installing K9copy on Maverick/Trinity

by daniele.manghi＠libero.it

>----Messaggio originale---- >Da: kb9vqf(a)pearsoncomputing.net >Data: 31/08/2011 18.27 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: Re: [trinity-users] Installing K9copy on Maverick/Trinity > >> Hello.I'm happily running Maverick/Trinity (binary distribution >> fromPearsoncomputing), and I've installed many packages, but allwith few >> dependencies. Now, I wish install K9copy.However I've seen that installing >> K9copy involves a lot ofdependencies, many of which are upgradings of the >> base KDEsoftware. Do you know if it'safe to install all that together >> withTrinity ? I would be very disappointing if I had to find out thatmy >> Trinity was jeopardized by modules from some kind of KDE4.x >> distribution.ThanksD. >> > >Which packages are you concerned about? > >You should be able to install any of the Trinity modules or applications >side-by-side with KDE4 (or any other DE for that matter)--if this fails, >it is considered a bug. > >Tim > > >--------------------------------------------------------------------- >To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net >For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing. net >Read list messsages on the Web archive: http://trinity-users.pearsoncomputing. net/ >Please remember not to top-post: http://trinity.pearsoncomputing. net/mailing_lists/#top-posting > > Well, at last I've installed k9copy, but it does not work at all, because it starts but crashes every time as soon as it tries to read the DVD driver. At the same time, I've discovered that Xine reads only my old backup copies but not commercial DVDs. Maybe the two problems are actually the same ? Do I have to install libdvdcss ? I tried to do so, unsuccessfully : manghi@silverblack:~$ sudo apt-get install libdvdcss Lettura elenco dei pacchetti... Fatto Generazione albero delle dipendenze Lettura informazioni sullo stato... Fatto Il pacchetto libdvdcss non ha versioni disponibili, ma è nominato da un altro pacchetto. Questo può significare che il pacchetto è mancante, è obsoleto oppure è disponibile solo all'interno di un'altra sorgente E: Il pacchetto "libdvdcss" non ha candidati da installare manghi@silverblack:~$ Thanks D.

13 years, 1 month

R: Re: [trinity-users] R: Re: [trinity-users] Installing K9copy on Maverick/Trinity

by daniele.manghi＠libero.it

>----Messaggio originale---- >Da: kb9vqf(a)pearsoncomputing.net >Data: 31/08/2011 21.35 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: Re: [trinity-users] R: Re: [trinity-users] Installing K9copy on Maverick/Trinity > >> >> >>>----Messaggio originale---- >>>Da: kb9vqf(a)pearsoncomputing.net >>>Data: 31/08/2011 18.27 >>>A: <trinity-users(a)lists.pearsoncomputing.net> >>>Ogg: Re: [trinity-users] Installing K9copy on Maverick/Trinity >>> >>>> Hello.I'm happily running Maverick/Trinity (binary distribution >>>> fromPearsoncomputing), and I've installed many packages, but allwith >>>> few >>>> dependencies. Now, I wish install K9copy.However I've seen that >>>> installing >>>> K9copy involves a lot ofdependencies, many of which are upgradings of >>>> the >>>> base KDEsoftware. Do you know if it'safe to install all that together >>>> withTrinity ? I would be very disappointing if I had to find out thatmy >>>> Trinity was jeopardized by modules from some kind of KDE4.x >>>> distribution.ThanksD. >>>> >>> >>>Which packages are you concerned about? >>> >>>You should be able to install any of the Trinity modules or applications >>>side-by-side with KDE4 (or any other DE for that matter)--if this fails, >>>it is considered a bug. >>> >>>Tim >>> >>> >>>--------------------------------------------------------------------- >>>To unsubscribe, e-mail: >>> trinity-users-unsubscribe(a)lists.pearsoncomputing.net >>>For additional commands, e-mail: >>> trinity-users-help(a)lists.pearsoncomputing. >> net >>>Read list messsages on the Web archive: >>> http://trinity-users.pearsoncomputing. >> net/ >>>Please remember not to top-post: http://trinity.pearsoncomputing. >> net/mailing_lists/#top-posting >>> >>> >> >> Well, at last I've installed k9copy, but it does not work at all, because >> it >> starts but crashes every >> time as soon as it tries to read the DVD driver. At the same time, I've >> discovered that Xine >> reads only my old backup copies but not commercial DVDs. Maybe the two >> problems are >> actually the same ? Do I have to install libdvdcss ? I tried to do so, >> unsuccessfully >> : >> manghi@silverblack:~$ sudo apt-get install libdvdcss >> Lettura elenco dei pacchetti... Fatto >> Generazione albero delle dipendenze >> Lettura informazioni sullo stato... Fatto >> Il pacchetto libdvdcss non ha versioni disponibili, ma Ã¨ nominato da un >> altro >> pacchetto. Questo puÃ² significare che il pacchetto Ã¨ mancante, Ã¨ >> obsoleto >> oppure Ã¨ disponibile solo all'interno di un'altra sorgente >> >> E: Il pacchetto "libdvdcss" non ha candidati da installare >> manghi@silverblack:~$ >> >> Thanks >> D. >> > >As this project is based in the United States, and is therefore subject to >the DMCA, I cannot provide any assistance on this particular topic. Also, >this topic should not be discussed on the mailing list. > >If anyone who does not live in the United States, and is therefore not >under the jurisdiction of a DMCA-type law, can help, please reply to the >original poster directly, not via the mailing list. > >Thank you for your understanding! > >Timothy Pearson >Trinity Desktop Project > > >--------------------------------------------------------------------- >To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net >For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing. net >Read list messsages on the Web archive: http://trinity-users.pearsoncomputing. net/ >Please remember not to top-post: http://trinity.pearsoncomputing. net/mailing_lists/#top-posting > > OK, I understand. D.

13 years, 1 month

Installing K9copy on Maverick/Trinity

by daniele.manghi＠libero.it

Hello.I'm happily running Maverick/Trinity (binary distribution fromPearsoncomputing), and I've installed many packages, but allwith few dependencies. Now, I wish install K9copy.However I've seen that installing K9copy involves a lot ofdependencies, many of which are upgradings of the base KDEsoftware. Do you know if it'safe to install all that together withTrinity ? I would be very disappointing if I had to find out thatmy Trinity was jeopardized by modules from some kind of KDE4.x distribution.ThanksD.

13 years, 1 month

SOLVED : R: Re: [trinity-users] VMWARE player complains about libcanberra-gtk-module

by daniele.manghi＠libero.it

>----Messaggio originale---- >Da: office(a)klepp.biz >Data: 29/08/2011 20.09 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: Re: [trinity-users] VMWARE player complains about libcanberra-gtk-module > >Am Montag, 29. August 2011 schrieb daniele.manghi(a)libero.it: >> Good morning. I've installed vmplayer on my Maverick+Trinity. >> Installationrun ok, but vmplayer refuses to start the guest operating >> system telling it is missing libcanberra-gtk-module.so. However, if try to >> installlibcanberra-gtk-module using apt-get, this one tells that the >> package is alreadyinstalled and at the most recent level. Besides, a >> 'locate' run finds >> /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.soso, what's really the >> problem ? Do you know if there is a way to bypass it ? >> ThanksDaniele Manghi > >run strace on your vmplayer and look which library it's really missing. > >-- > >Mag. Dr. Nikolaus Klepp >Einnehmerstraße 14 >A-4810 Gmunden >Tel.: +43 650 82 11 724 >email: office(a)klepp.biz > >--------------------------------------------------------------------- >To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net >For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing. net >Read list messsages on the Web archive: http://trinity-users.pearsoncomputing. net/ >Please remember not to top-post: http://trinity.pearsoncomputing. net/mailing_lists/#top-posting > > Thanks, I've fixed the problem by adding /usr/lib/gtk-2.0/modules/ to LD_LIBRARY_PATH besides, I had to start vmplayer with sudo (I don't konw why)

13 years, 1 month

ibus support

by Mihira Fernando

Does trinity have support for ibus imput method ? if it does, how to enable it ? Thanks in advance

13 years, 1 month

GREAT: IT WORKS (Re: [trinity-users] HOW To configure in order to use apt-get ?)

by daniele.manghi＠libero.it

>----Messaggio originale---- >Da: hha4491(a)web.de >Data: 25/08/2011 8.51 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: Re: [trinity-users] R: Re: [trinity-users] R: Re: [trinity-users] R: Re: [trinity-users] HOW To configure in order to use apt-get ? > >Hi Daniele, >the file looks o. k., maybe you only have to run "sudo apt-get update". And, >of course you should add the Trinity repositories: >http://www.trinitydesktop.org/installation.php#ubuntu >-- >Viele Grüße, >Hartmut > >Hungerhilfe: http://www.thehungersite.com > >Ohne Zensur suchen: >http://suche.amnesty-bergedorf.de/ > >ökologisch suchen: >http://www.ecosia.de > >Das heutige Motto: >Denn für dieses Leben >Ist der Mensch nicht anspruchslos genug. >Drum ist all sein Streben >Nur ein Selbstbetrug. (Bertolt Brecht) > >--------------------------------------------------------------------- >To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net >For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing. net >Read list messsages on the Web archive: http://trinity-users.pearsoncomputing. net/ >Please remember not to top-post: http://trinity.pearsoncomputing. net/mailing_lists/#top-posting > > Many thanks. Having done what's been said, I've managed to install xine-ui from network and run it against a DVD. I assume that from now on I'll be able to install more-or-less all what's available from network for maverick. This really means that I'll run an up-to-date Unix system with Trinity instead of KDE 4 - and I'm very happy. Thanks thanks thanks again

13 years, 1 month

How to load a package file

by daniele.manghi＠libero.it

Here I am again.Is there a way to install a package from a file instead of getting it from network ?I can't install Dropbox by means of apt-get. I have its deb package file,but I don't know what to do with it.Thanks

13 years, 1 month

trinity packages for powerpc

by Frank Hildesheim

From: frankhildesheim(a)msn.com To: trinity-users(a)lists.pearsoncomputing.net Subject: trinity packages for powerpc Date: Mon, 22 Aug 2011 11:16:58 +0200 Hello, are there any packages for powerpc (PowerBook G4)? I didn't find any informations which plattforms are supported. i386, amd64? Thanks Frank

13 years, 1 month

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users August 2011