tde-users

users@trinitydesktop.org

6 participants
4292 discussions

TDE NetworkManager frontend not working. Got "unable to perform requested operation". ConsoleKit (rly needed?) and PolicyKit are installed.
by Richard Lamboj 15 Feb '17

15 Feb '17

Hello, i can not use the tde network-manager frontend. A Message-Box pops up and says: Unable to save network connection! Potential causes: * Insufficient permissions * NetworkManager not running * DBUS failure Beside that i think the Assistent should not be closed. Both - ConsoleKit and PolicyKit - are installed. And i'm using OpenRC, not systemd on Debian Jessie, with backports enabled. Kind Regards, Richard

2 1

r14-xdg-update
by Leslie Turriff 11 Feb '17

11 Feb '17

Last week when I started my newest machine (x86_64 intel, OpenSuSE Leap 42.2), when logging in I got a notification box that said, The r14-xdg-update script has been run at least once. The script is not successfully updating. The script will run with each login until corrected. Please contact an administrator or take appropriate administrative action to correct the problem. The error code is 9. When I continued on, all of my Trinity desktop settings were gone. Rebooting does not help, nor did reinstalling the OS and Trinity. I have no idea what "appropriate administrative action" might be, nor what error code 9 means. Help! Leslie

1 0

multiple monitors
by Gene Kodadek 10 Feb '17

10 Feb '17

Can somebody give me a guide to getting a multi-monitor setup working using the native tools? I'm on Debian Jessie if that makes a difference. I had it working on a PCLInux OS install but can't remember how I did it.

2 1

digikam dependency conflict in openSSUE 13.2
by Istvan Gabor 09 Feb '17

09 Feb '17

YaST reports dependency conflict: #### YaST2 conflicts list - generated 2017-02-09 21:06:35 #### nothing provides trinity-digikam = 0.9.6-14.0.4_1.oss132 needed by trinity-digikam-i18n-2:0.9.6-14.0.4_1.oss132.x86_64 [ ] deinstallation of trinity-digikam-i18n-2:0.9.6-14.0.4_1.oss132.x86_64 [ ] break trinity-digikam-i18n-2:0.9.6-14.0.4_1.oss132.x86_64 by ignoring some of its dependencies #### YaST2 conflicts list END ### Though I have both above packages installed: > rpm -qa|grep digikam trinity-digikam-i18n-0.9.6-14.0.4_1.oss132.x86_64 trinity-digikam-0.9.6-14.0.4_1.oss132.x86_64 I have deleted and reinstalled the packages but always get the error. Istvan

2 1

digikam crash
by Istvan Gabor 09 Feb '17

09 Feb '17

Hello: Digikam crashes when in image editor I right click the images or try to select area. This occurs in openSUSE 13.2 Trinty TDE R14.0.4 64 bit. Digikam is trinity-digikam-0.9.6-14.0.4_1.oss132.x86_64. It does not occur with all images, only if the resolutions or file size is over a limit, though I don't know the limit. It occurs with jpg file 3264x2448 resolution ~1.8 MB, but it doesn't occur if I downsize this image to 1500x1125 ~500 KB. Does anyone have this problem? Could it be fixed? Thanks, Istvan

1 0

Re: [trinity-users] Re: Application resolution vs desktop resolution
by Thierry de Coulon 08 Feb '17

08 Feb '17

On Wednesday 08 February 2017 21.56:32 deloptes wrote: > Thierry de Coulon wrote: > > My problem is this: while I have the screen resolution setup to 1920x1080 > > (and trinity desktop looks OK for this resolution), the monitor (which is > > accessed from HDMI through an HDMI to VGA converter because I use a KVM > > that needs VGA connectors) was initially "seen" as 1024x768. > > It is interesting to know what is the output of xrandr > > I have/had similar issues with my notebook(s) and external monitor. > Natively eDP1 supports 1366x768, while monitor does 1920x1080. > > So switching on and of the one and the other messed up from time to time > the modesettings and I end up with unusable resolution. The external would > refuse to accept 1920x1080. It improved recently with later 4.9 kernel and > I did not test extensively. > One option was to configure monitors in xorg.conf with their mod lines. I > did this on the older notebook > I however use now xrandr --scale as X tends to pick up the lowest common > and it can not support different resolutions or whatever. So I put the > bigger one to 1920x1080 and scale eDP1., which gives acceptable output. > > I have read of similar issues with KVM. > > regards > That's what I get: Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 DP1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 256mm x 192mm 1024x768 60.00 + 1920x1080 60.00* 59.94 1280x1024 85.02 60.02 1440x900 74.98 59.90 1280x960 60.00 1360x768 60.02 1280x800 59.91 1280x720 119.99 60.00 59.94 720x480 60.00 59.94 To me it seems the chipset by itself can do a lot of resolutions. I am new to HDMI (I actually don't use it anwhere as I have no monitor with such a connector). So I can't test what would happen if I had a direct connection to the monitor. I could imagine that the chain HDMI - HDMI to VGA (cheap chinese thing, by the way) - KVM switch - monitor is too much for a system that desperately tries to identify the monitor by itself. In the old time I would have been asked what my screen was... Thierry

1 0

Re: [trinity-users] Application resolution vs desktop resolution
by Thierry de Coulon 08 Feb '17

08 Feb '17

On Wednesday 08 February 2017 12.43:43 Dr. Nikolaus Klepp wrote: > This will most likely not solve your problem for GTK3 applications, but you > can try to fix the screens DPI: > > kcontrol / Apperreance / Fonts : Force DPI ... 96 DPI > > For GNOME/GTK please look here: https://wiki.archlinux.org/index.php/HiDPI > > > Nik Thanks Nik, it did solve the problem, at least for the apps I use on that machine (kmail, Vivaldi, Yast). I had never noticed (nor needed) that setting, now I know where to look. Thierry

1 0

Application resolution vs desktop resolution
by Thierry de Coulon 08 Feb '17

08 Feb '17

Actually I don't think this is a Trinity problem, because reverting to lightdm shows no change, but I post this in hope someone can give me a clue: I have setup a machine based on an Intel based SBC (UP board with a "cherry trail" processor. It runs openSUSE Leap and Trinity. I initially had lots of screen corruption but this I solved by setting the graphics to "xua". My problem is this: while I have the screen resolution setup to 1920x1080 (and trinity desktop looks OK for this resolution), the monitor (which is accessed from HDMI through an HDMI to VGA converter because I use a KVM that needs VGA connectors) was initially "seen" as 1024x768. And the applications seem to retain that resolution. I could make things better in kmail (which is the main application for this machine) by reducing the font size. The other applications still look "too big". So I get the feeling that the lower resolution was saved somewhere... Is there a place where I can tell them to use 1920x768? Have good day, Thierry

4 4

kooldock
by Gene Kodadek 07 Feb '17

07 Feb '17

I just installed Trinity to my Debian Stable machine. Looks good, but I can't figure out how to enable the kooldock. Also, none of the old KDE 3.x wallpapers are available from the desktop settings menu; is that an extra package I need to install? Thanks!

2 3

To launch kmix at graphic tde boot session
by andre_debian＠numericable.fr 06 Feb '17

06 Feb '17

Hello, How to have the kmix icon right down in the taskbar, at the graphic tde boot session ? Since some days, this icon of kmix is not present, and I have to lauch it in a terminal by the command : "kmix &" Thanks for your answers. André

2 5

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users