A partial answer to self:
It turns out that the problem was caused by HAL not running. However, it is not enough to
start
hald (HAL daemon) from within TDE and then starting KPowerSave. For things to work
properly hald
must be started before logging into TDE.
That being said, how do I make hald start during system boot? I have hald binary in
/usr/sbin but
I am missing startup scripts in /etc/init.d. During Good Old Times it was enough to create
a
script that run the required command and place that script in directory corresponding to a
given
runlevel (in case of Debian this would be /etc/rc5.d). But this does not seem to work.
Does
anyone have a script that starts up hald and could perhaps post it to the list?
Janek
Dnia wtorek, 19 kwietnia 2016, Jan Stolarek napisał:
Hi all,
I have TDE 3.5.13.2 installed on Debian 7.10. Some time ago (probably after
one of security updates) my KPowerSave stopped working - it does not allow
me to set power scheme nor does it recognize whether the laptop is running
on battery or A/C. These features still work in other programs (eg. htop
recognizes whether I am running on battery or A/C, I can use cpufreq-set to
set CPU speed) so this is not a system-wide breakage. Does anyone have any
ideas what might be wrong?
Janek
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez
pomyłkę prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the
individual to whom it is addressed. If you are not the intended recipient
or if you have received this message in error, please notify the sender and
delete it from your system.
---------------------------------------------------------------------
To unsubscribe, e-mail:
trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional
commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list
messages on the web archive:
http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez pomyłkę
prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the individual to whom it
is addressed.
If you are not the intended recipient or if you have received this message in error,
please notify the sender and delete it from your system.