25 Dec
2016
25 Dec
'16
5:54 p.m.
Ló Béla wrote:
snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_emu10k1,snd_seq_device,snd_mixer_oss
You did not
provide any information about kernel or OS.
Debian 8, AMD64, 3.16
Are you not using
pulse audio?
No, pulseaudio has been entirely removed from my machine.
On the alsa page there are some instruction how
to configure the devices
properly, so that you have consistent mapping.
Unfortunately i have no idea what kind of device numbers are exists on the
Audigy Rx and if ALSA recognize it badly, then the current layout maybe
only partially correct. So, i don't know what aliases should i make.
As for the commands:
root@Csabi:~# uname -a
Linux Csabi 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)
x86_64 GNU/Linux
root@Csabi:~# lsmod | grep snd
snd_emu10k1 148204 3
snd_util_mem 12747 1 snd_emu10k1
snd_hwdep 13148 1 snd_emu10k1
snd_rawmidi 27024 1 snd_emu10k1
snd_seq_device 13132 2 snd_rawmidi,snd_emu10k1
snd_ac97_codec 118711 1 snd_emu10k1
snd_pcm_oss 44798 0
snd_mixer_oss 22042 2 snd_pcm_oss
snd_pcm 88662 3 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_timer 26668 2 snd_pcm,snd_emu10k1
snd 65338 13
soundcore 13026 2 snd
ac97_bus 12510 1 snd_ac97_codec
root@Csabi:~# amixer
Result is here: http://oscomp.hu/depot/amixer.log
root@Csabi:~# amixer -c 0
Result is here: http://oscomp.hu/depot/amixer_c0.log
root@Csabi:~# amixer -c 1
Invalid card number.
I looked briefly in the kmix code. There are few places that could be
checked, but this will require enable debugging in the code (compiling etc)
But based on your input, this
http://www.linux-hardware-guide.com/2014-08-26-creative-sound-blaster-audig…
and this
http://alsa.opensrc.org/Emu10k1
https://wiki.debian.org/snd-emu10k1
I think you need at least custom setup to the driver (and perhaps newer
kernel version). This way the chance for the driver reporting usable setup
is higher.
I think you have to solve this and come back. Perhaps alsamixer can resolve
some of the reported features better than kmix, which does not mean that
what is reported is correct.
I see there is a lot of information on the web regarding your card. I am not
an expert in alsa, but I would look first in this direction. Try at least
setting up your device values properly.
I have for example
## ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-hda-intel
alias snd-card-1 snd-usb-audio
## module options should go here
options snd-hda-intel index=0 model=ref enable_msi=1 enable=0,1
regards
It could be something in kmix, but I doubt it.
Unless, it's really that ALSA reports badly something to KMix,
it's a KMix issue.
- TCH