4 Feb
2015
4 Feb
'15
9:21 p.m.
On Wednesday 04 of February 2015 20:58:06 Nicolas Dobigeon wrote:
2015-02-04 20:37 GMT+01:00 Nicolas Dobigeon
<dobigeon(a)gmail.com>om>:
Because I sometimes had a problem with the order of sound cards - sometimes
differed between individual booting, I solved it by forcing the order by
module name:
$ cat /etc/modprobe.d/snd-cards.conf
options snd_intel8x0 index=0
options snd_ens1371 index=1
options snd_usb_audio index=2
options snd_pcsp index=3
--
Slávek
2015-02-04 13:56 GMT+01:00 Slávek Banko
<slavek.banko(a)axis.cz>cz>:
I tryed a /etc/asoundrc with the content
pcm.!default {
type hw
card PCH
}
ctl.!default {
type hw
card PCH
}
And sound works ! It seems it was an order problem, now i have to find
what is the package name for commons environments sounds (windows
closing, minimizing).
Nicolas D.
Dne st 4. února 2015 Nicolas Dobigeon napsal(a):
Hi,
# lspci
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller
(rev 09) 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio
Controller (rev 04)
# cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xb0610000 irq 66
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xb0614000 irq 64
It seems that my HDMI output is the main input.
How can i change it to the card PCH ?
Thanks. 2015-02-04 13:22 GMT+01:00 Lisi Reisz
<lisi.reisz(a)gmail.com>om>:
> On Wednesday 04 February 2015 12:14:43 Nicolas Dobigeon wrote:
> > All worked with the base desktop (Gnome) but when i installed an
> > used TDE, it can't play any sound with ARTS.
> > I don't know how to correct it.
>
> I always have trouble with sound in everything. The problem is
> usually that sound is muted somehwere, especially if I know that it
> is basically working, as you do; and I just have to find where it is
> muted.
>
> Most obvious first - have you looked at KMix? Alsamixer?
> Pavucontrol? (In that order! And you may not have all of them.)
>
> Lisi
It was OK on Kmix, nothings was muted.
I didn't look on alsamixer yesterday but i think the items are the
sames. Pulseaudio isn't installed ... then no this way.
I'll look to this point again and reply to the list with the result.
Also, i'll send the lspci output.
Is it possible that the default sound output with ARTS is my secondary
HDMI output ? Even if nothing in pluged in ?
Nicolas D.
Try: cat /proc/asound/cards
By default output go to the card number 0.
--
Slávek