tde-devels

devels@trinitydesktop.org

4 participants
3805 discussions

kmix/kmixer cannot see arts running
by David C. Rankin 30 Jan '14

30 Jan '14

Tim, Darrell, Slavek, All, I have artsd running on this install, but kmix cannot find any sound backend running: 449 ? S 0:03 \_ tdelauncher [tdeinit] --new-startup 460 ? S 0:24 \_ twin [tdeinit] -session 10d7cdd8c9000139108311200000009720000_1391 479 ? S 1:32 \_ /opt/trinity/bin/artsd -F 10 -S 4096 -s 60 -m artsmessage -c drkonqi -l 3 -f kmix has the red crossed-out circle over it in the tray and when opened, you have no option of choosing any backend sound server. I have screenshot of them both. What should I attempt to try and get kmix working? -- David C. Rankin, J.D.,P.E.

1 0

kprinter cannot see running cupsd process
by David C. Rankin 30 Jan '14

30 Jan '14

Tim, Darrell, Slavek, Going through kcontrol printer configuration, I was hit with an error that cups could not be found (see attached dialog). That was strange because cupsd was running: [15:49 valhalla:/home/david] # systemctl status cups -l cups.service - CUPS Printing Service Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled) Active: active (running) since Thu 2014-01-30 14:13:50 CST; 1h 37min ago Main PID: 839 (cupsd) CGroup: /system.slice/cups.service └─839 /usr/bin/cupsd -f Do you have any ideas why kprinter configuration would not be able to see cups? -- David C. Rankin, J.D.,P.E.

1 0

tdeio not closing sftp connections
by David C. Rankin 30 Jan '14

30 Jan '14

Tim, Darrell, tdeio in R14 is not closing sftp connections after they are opened to save files, etc. I was looking at ps axf to check on why kmix cannot find any mixer, and I stumbled across reams of open sftp connection. During this session I had opened a file to save kcontol issues I found on a local server named 'nirvana'. The name of the server IS important here because it looks like tdeio is logging the incorrect name 'nirvan' in order to track the connection. Over the course of an hour or so I had 'saved' the file numerous times. At the time I check 'ps axf' I had long since closed the file that I had opened via sftp, so all sftp connection should have been closed long ago. Instead I found: 912 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 913 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 916 pts/4 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 917 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 920 pts/5 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 921 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 924 pts/6 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 925 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 928 pts/7 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 929 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 932 pts/8 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 933 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 934 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 937 pts/9 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 938 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 941 pts/10 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 948 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 951 pts/12 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 952 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1067 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1068 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1070 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1073 pts/15 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1074 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1077 pts/16 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1078 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1081 pts/17 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1082 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1085 pts/18 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1086 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1089 pts/19 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1091 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1092 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1095 pts/20 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1096 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1097 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1199 ? S 0:01 \_ kate [tdeinit] --use 1200 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1201 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1203 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1206 pts/11 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1210 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1212 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1215 pts/13 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1217 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1218 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1223 ? S 0:00 \_ tdeio_file [tdeinit] file /tmp/tdesocket-david/tdelauncherr0VsIV.s 1234 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1235 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1236 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1239 pts/21 Ss+ 0:00 | \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 1240 ? S 0:00 \_ tdeio_sftp [tdeinit] sftp /tmp/tdesocket-david/tdelauncherr0VsIV.s 1243 pts/22 Ss+ 0:00 \_ /usr/bin/ssh -o ForwardX11=no -o ForwardAgent=no -e none -l david -v nirvan 458 ? S 0:02 ksmserver [tdeinit] What to check next? This clearly looks like a tdeio bug. -- David C. Rankin, J.D.,P.E.

1 0

Basket-notepads - import function breaks basket settings
by David C. Rankin 30 Jan '14

30 Jan '14

It appears that if a basket notpads file was saved in tde prior to R14, it cannot be opened again in basket notepads in R14 without breaking the ability to configure basket notepads. The error that appears in basket is odd: Library files for "kcm_basket.la" not found in paths. Possible reasons: - An error occurred during your last TDE upgrade leaving an orphaned control module - You have old third party modules lying around. All of the configuration abilities for basket are just gone... Screenshot attached. -- David C. Rankin, J.D.,P.E.

2 2

tdepowersave - stuck on consuming 5% of CPU after "configure desktop" screensaver applet launched
by David C. Rankin 30 Jan '14

30 Jan '14

Tim, Darrell, All, After checking the screensaver settings in TDE, tdepowersave was launched and never closed. I ended up NOT selecting any screensaver for autostart and closed the dialog. Regardless, tdepowersave keeps churning away. Screenshot attached. All of these reports are to capture first-looks/thoughts of R14 and the make a record so they can be followed up on. These are small things. All in all, R14 without hal is working very well. -- David C. Rankin, J.D.,P.E.

1 0

Update Highlight Rules before RC1
by David C. Rankin 30 Jan '14

30 Jan '14

Tim, Darrell, The syntax highlighting rules for kwrite/kate should be updated one last time from kde.org before RC1 is frozen. Currently new version exist for: C++11 CMake CSS POV-Ray reStructuredText Might as well be up-to-date for R14. -- David C. Rankin, J.D.,P.E.

2 2

30 Jan '14

Tim, Darrell I did a fresh install of Arch and loaded TDE. I simply used systemd to launch tdm (e.g. systemctl enable tdm). Amazingly (and quite comforting) TDE fired up on first boot without issue. But..., and there is always a but.... When I attempt to login, I do ctrl+alt+del to get to the login prompt, I login, the screen turns black like it is starting to launch tde -- but then goes right back to the tdm [press ctrl+alt+del] screen. What gives? Is this tsak run amuck? Checking .xsession-errors, there is only 1 error: /opt/trinity/share/config/tdm/Xsession: line 62: exec: ck-launch-session: not found The line complained of is: case $session in "") exec xmessage -center -buttons OK:0 -default OK "Sorry, $DESKTOP_SESSION is no valid session." ;; failsafe) exec ck-launch-session xterm -geometry 80x24-0-0 ;; custom) exec ck-launch-session $HOME/.xsession ;; default) exec ck-launch-session /opt/trinity/bin/starttde ;; *) --> eval exec ck-launch-session "$session" ;; esac exec xmessage -center -buttons OK:0 -default OK "Sorry, cannot execute $session. Check $DESKTOP_SESSION.desktop." So apparently case is hitting its default '*' and attempting to execute: eval exec ck-launch-session "$session" and fails. The strange thing is that is doesn't execute the default) which would starttde which I have verified is in place. Further, I can't start any desktop from tdm. I installed fluxbox, and when I choose "Fluxbox" from the greeter, the same thing happens -- what to check/do? -- David C. Rankin, J.D.,P.E.

1 2

Installing Trinity on Archlinux
by David C. Rankin 30 Jan '14

30 Jan '14

For the upcoming R14 release, test packages are available for installation and testing. These packages are pre-RC1 R14 packages, but should be very close to what will be announced as RC1 in the next few days. You will first need to add the repository to your pacman.conf. To add the repository, edit /etc/pacman.conf [as root] changing 'x86_64' to 'i686' as necessary and add the following lines at the end: [trinity] SigLevel = Never Server = http://trinity.ceux.org/r14/x86_64 'SigLevel = Never' is required because the packages are not yet built and signed with a signing key. I have worked to build "groups" into the tde packages so that install is easily accomplished with: pacman -Sy "group" where "group" is one of: tde-base : minimum possible install (up to tdebase) tde-core : 'tde-base' + common additional packages tde-dev : 'tde-core' + development bindings and packages tde-extra : 'tde-core' + additional desktop features tde-multimedia : 'tde-core' + all AV and CD/DVD apps (amarok, kaffeine, etc.) tde-complete : 'tde-extra' + all building packages Which will work wonderfully -- once it is complete (target R14). For now, the group information is there, but which package is contained in which group is still up in the air. What I suggest for now is installing with pacman -Sy "group" and then compare the installed packages to those available. Use 'pacman -Sl trinity' to get a list of packages available and compare to 'pacman -Q | grep tde' after you install a chosen group, then install any additional packages wanted with 'pacman -Sy pkg1 pkg2 pkg3 pkg4 ....' As the groups are currently set, use the following to install TDE (pacman will handle any dependency packages): pacman -Sy 'tde-core' # minimal install - no koffice pacman -Sy 'tde-extra' # moderate install - with koffice pacman -Sy 'tde-base' # almost all of TDE You can view the contents of each group before installing with (for example): pacman -Sl 'tde-base' Remember, listing the contents of the group only lists packages designated as part of that group and not all the dependencies that will be pulled in to support that group. (i.e. if k3b is shown in a group, then k3b itself will pull in (tdebase, tdelibs, tqtinterface, tqt3, etc.....) as individual dependencies. The other groups 'dev', 'multimedia', and 'complete' don't really do much at the moment. "REMEMBER TO LOOK OVER THE INSTALL OUTPUT FOR optdepends()" The list of optional additional packages you can install from the normal Arch repositories to provide full function for the applications installed. After installation, refer to the wiki (https://wiki.archlinux.org/index.php/Trinity) to get TDE running. The wiki has not been updated for systemd and I have not yet setup TDE under systemd, but I do not think there will be many changes required. If you are using default systemd booting to the graphical target, then twin/TDE should work fine serving as the default desktop entry in the graphical.target.wants. If you are a systemd guru, then report back with your experience and provide any additional information you feel necessary. These packages are testing packages for the upcoming R14 release built without hal. That being said, there were built with the same PKGBUILDS (modified as needed) as the final packages for 3.5.13-sru and previous working R14 builds were built from. Please evaluate and report problems back here to the list. If you confirm a bug, in the TDE code and not the way it was built, then please open a bug with the trinity bug tracker: http://bugs.pearsoncomputing.net/enter_bug.cgi Enjoy. -- David C. Rankin, J.D.,P.E.

1 0

Mutant Turkey hosts Arch Packages for Testing
by David C. Rankin 30 Jan '14

30 Jan '14

All, Calvin, a/k/a Mutant Turkey has generously agreed to host archlinux packages for testing. Contact Calvin for repository information if you have an interest installing tde on archlinux. The i686 repository is complete and the x86_64 repository will be available later tonight. -- David C. Rankin, J.D.,P.E.

2 1

Re: [trinity-devel] python-tqt FTBFS
by Darrell Anderson 29 Jan '14

29 Jan '14

>>Look at the comments 1, 2 and 3 in the bug 1790. In principle: >>adding of >>folder sip4-tqt, respectively, python-tqt in the call >configure.py >>and create empty __ init__.py file. > >Thank you. Would you or somebody please post a simple listing of >the final package contents? Never mind. I think I got the kinks ironed out. sip4-tqt, python- tqt, and python-trinity all now build. I'm now building tdebindings. Thank you for the help. Darrell

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

tde-devels