tde-users

users@trinitydesktop.org

4290 discussions

[trinity-users] Does TDE require iBus?
by Thierry de Coulon 12 Apr '20

12 Apr '20

Hello all, Now I have iBus showing in my system tray. It was not there before (at least it did not show). I had to install different things (including Skype and jitsi) for Howoffice work, I don't know if that's where it comes from. I have a feeling it sometimes messes up my keyboard. Is iBus (iBus-daemon, iBus-dconf, iBus-engine-sim, iBus-extension, iBus-portal, iBus-ui-gtk3, iBus-x11) a requirement for TDE? I ask before removing and possibly breaking things... Thierry --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

4 3

[trinity-users] Just for the records...
by Thierry de Coulon 12 Apr '20

12 Apr '20

I don't imagine many would try it, but I had to investigate installing Deepin Linux on a laptop for my wife (she requires a "Mac like" interface and she IS chinese, so a chinese distributions ensures the gets her chinese stuff running). As Deepin is based on Debian (still Stretch, I found out), I decided to try installing TDE and it works: I can run konqueror on Deepin DE, and Deepin apps on Trinity Desktop. Thierry --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

2 1

[trinity-users] Re: konqueror and F4
by Contendo Sureglass via trinity-users 09 Apr '20

09 Apr '20

On Thursday 02 April 2020 08:07:15 Dr. Nikolaus Klepp wrote: > Anno domini 2020 Thu, 2 Apr 08:51:13 -0600 > > D. R. Evans scripsit: > > Stefan Krusche wrote on 4/1/20 11:46 PM: > > > Am Mittwoch, 1. April 2020 schrieb D. R. Evans: > > >> D. R. Evans wrote on 4/1/20 3:24 PM: > > >>> How do I configure exactly which command should be run when I press > > >>> F4 inside konqueror? > > >> > > >> Possibly I should be a bit clearer: by default, F4 appears to run > > >> /opt/trinity/bin/konsole; I want to know how to execute a different > > >> command that will open a (different kind of) terminal when I hit F4 > > >> inside konqueror. > > > > > > Have you tried to assign the key F4 globally with kmenuedit? I think it > > > should override the assignment inside konqueror. Not tested. > > > > OK, I guess I still wasn't clear. Sorry. > > > > Let me try a different way. > > > > In konqueror under the Tools Menu, the first item is: > > Open Terminal F4 > > When I execute that menu item, I want to run something other than > > /opt/trinity/bin/konsole. How do I do that? > > > > Suppose, for example, that I just wanted an xterm, whose executable is > > /usr/bin/xterm; how would I cause that menu item to execute > > /usr/bin/xterm instead of /opt/trinity/bin/konsole? > > > > Doc > > From commandline execute: "tdecmshell componentchooser" - there select > "terminal emulator" (or however it's called in your localisation). Problem: > this will not only change it for konquereor, but all TDE. > > Nik You might want to check out your config file(s), which can be changed with a text editor. I'm not sure which one governs your Konqueror settings; it could be that they are duplicated for reasons unknown to me, or just that I have migrated through several different Linux systems, always using KDE3 or TDE, so that I am the culprit. Or maybe the KDE5 version of Konqueror is in the .kde folder, and the Trinity version is in .trinity, which would make sense, but it ain't necessarily so. In any case, it seems to me that if you change the entry in these lines, you can have whatever terminal-emulator you want. ************ /home/<USERNAME>/.kde/share/config/konquerorrc -or- /home/<USERNAME>/.trinity/share/config/konquerorrc [Open-with settings] ... /usr/bin/x-terminal-emulator,konsole ************ And here you will find another variant: /opt/trinity/share/config.kcfg/konqueror.kcfg <group name="General" >  <entry key="TerminalApplication" type="String"> <default>konsole</default> <label></label> <whatsthis>Terminal application to use.</whatsthis>  </entry> </group> ************ Maybe this will help. Bill

7 14

[trinity-users] Current build throws kjobviewer libcups error (cups disabled)
by Snidely Whiplash 08 Apr '20

08 Apr '20

Hello I just did a new build of TDE (git sources from today) on my custom Linux from Scratch system. I don't have CUPS, I don't print, I despise printers, don't have one and have no use for them (well, maybe ballistics targets). Cups is not going to be a dependency on my system. I am passing -DWITH_CUPS=OFF to all the builds (AFAIK it's only valid for tdelibs, ignored everywhere else). Now, when starting tde I get a KJobViewer error dialog with: "There was an error loading tdeprint_cups. The diagnostic is: Library files for "tdeprint_cups.la" not found in paths." Not just once, but twice. There is no setting to disable tdeprint as far as I can see. There is no tdeprint_cups.la either. I have never had this annoyance before. Unless I can find a way to get it to stop, I'm going to restore a backup of my previous tde build. I have already tried renaming kjobviewer but then I get 3 error messages. Creating a bogus tdeprint_cups.la just causes the error dialogs to have blank diagnostic message. Any ideas for a temporary workaround (compile time or run time trickery)? I can't have those error dialogs. Thanks,

3 6

[trinity-users] konqueror and F4
by D. R. Evans 02 Apr '20

02 Apr '20

How do I configure exactly which command should be run when I press F4 inside konqueror? Doc -- Web: http://enginehousebooks.com/drevans

5 7

[trinity-users] Difference between Konqueror-Trinity and Konqueror-KDE5
by ajh-valmer 01 Apr '20

01 Apr '20

Hello, Does Konqueror-Trinity use the KHTML "motor", or another webengine as KDE5 ? I receive informations that Konqueror-KDE5, should be better than Firefox or Chrome... Thank for this technical information, Take care and hope you are all well. André Are you confined in USA, forbidden to leave home, excepted for food shopping and one hour max, with the obligation to fill a paper before, and police control ? --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

5 5

Re: [trinity-users] r14-xdg-update script error when TDM is starting TDE
by Janek Stolarek 01 Apr '20

01 Apr '20

(resending truncated email) Hi, I am seeing similar problems, reported them as a bug here: http://bugs.pearsoncomputing.net/show_bug.cgi?id=3083 Janek --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

2 1

[trinity-users] Print Key
by Brian Bates 30 Mar '20

30 Mar '20

Hi All, Running Trinity R14.0.7 on Debian Buster 10.3. The print key shortcut by default starts KSnapshot. When I changed this in both the control center or the menu editor, it made no difference, still wanted to start KSnapshot and not my selected application. Found a file called khotkeysrc in .trintiy/share/config/ and changed all the ksnapshot entries to my application command. Still nothing until after I logged out and in. Now working. BTW: I have remapped other keys successfully using the control center or the menu editor. The print key just seems to have thrown a wobbly for some reason. -- Cheers Buzz --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

1 0

[trinity-users] Raising Windows
by Brian Bates 29 Mar '20

29 Mar '20

Hi All, If I hover the mouse pointer over a non active window and then use the scroll wheel, it activates the window and scrolls it, but does not raise it to the top of the stack. i.e. parts of the window will remain behind other windows. How can I get a window to be raised on activation? -- Cheers Buzz --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

1 1

[trinity-users] KDE/TDE Digital matching Kdm & KSplash themes
by David C. Rankin 29 Mar '20

29 Mar '20

All, From time to time I create a new kdm and ksplash theme. If anyone is interested, here is the latest (link good for 30 days) https://paste.opensuse.org/31493489 I have the artwork so changing KDE/TDE can be done relatively easy. If interested, let me know and I can post a link (probably on digitalblasphemy or the like) -- David C. Rankin, J.D.,P.E. --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

3 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users