tde-users

users@trinitydesktop.org

20 participants
4181 discussions

by Christian Schmitz

Helo Everyone: I installed TDE on opensuse tumbleweed. Almost everything work fine.Only i have a little problem: When i choose try to shutdown my computer (powerdown option) the TDE closes and the system go to graphic login. The graphic login seem like plasma login. How can work around for shutdown the computer? Best Regards Christian -- Be Free, Be Linux

6 years, 10 months

tdecmshell sudo

by Oleg Levenets

Hi, I install tde together with kde4 on my Slackware 14.2, it seems to work well, after which I remove system kde4 to leave one Trinity. I noticed that I can not configure the system settings in the control panel, because the graphical configuration of tdecmshell does not accept my administrator password! Command /opt/trinity/bin/tdecmshell tdm --emdeb 83888742 --lang ru says "Error - TDE su" wrong password, try again. Before kde4 was removed, this worked. What am I doing wrong?

6 years, 10 months

[trinity-users] arch availability

by Felix Miata

If https://wiki.trinitydesktop.org/DebianInstall makes any mention of arches, I'm not seeing it. Is TDE available for all Debian's arches, or only those for which Windows flavors exist (Intel86/AMD)? I just put Jessie on a PowerMac G4, and would like to enjoy TDE on it if possible. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/

6 years, 10 months

Kmail -- offline mode

by Stefan Krusche

Hello everyone, as of recently when kmail is started a dialog pops up which says that kmail is in offline mode and asks whether I would like to switch to online mode. I don't know where this comes from, but I guess it may have something to do with some dbus- or notification-related package I have removed some time ago. But why would kmail notify being in offline mode everytime it gets started though I never switched to offline mode before?! Any hints about where to look at to investigate further are welcome. Regards, Stefan

6 years, 10 months

Build Krusader

by Oleg Levenets

Hi, I continue to build tde packages with clang. The last application that refused to compile is Krusader. I checked git, but there are not any suitable patches. I'm attaching my log, unfortunately, I'm not a programmer and I'll be happy for any help!

6 years, 10 months

tdemultimedia build with clang

by Oleg Levenets

Hello, I was going to create a TDE tree using Clang for building. I can not build a tdemultimedia package, it always leads to a binary archive build error: Makefile:766: recipe for target 'StereoVolumeControl_impl.lo' failed make[4]: *** [StereoVolumeControl_impl.lo] Error 1 make[4]: Leaving directory '/tmp/build/tmp-tdemultimedia/tdemultimedia/build-tdemultimedia/noatun/library/noatunarts' Makefile:934: recipe for target 'all-recursive' failed make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory '/tmp/build/tmp-tdemultimedia/tdemultimedia/build-tdemultimedia/noatun/library' Makefile:833: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/tmp/build/tmp-tdemultimedia/tdemultimedia/build-tdemultimedia/noatun' Makefile:652: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/tmp/build/tmp-tdemultimedia/tdemultimedia/build-tdemultimedia' Makefile:569: recipe for target 'all' failed make: *** [all] Error 2 I tried to build it with the parameter NUMJOBS = "- j1", but it also did not yield any result.

6 years, 10 months

Re: [trinity-users] tips on getting TDE to run smoothly

by Thierry de Coulon

On Sunday 18 February 2018 14.41:01 William Morder wrote: > I've been trying out TDE off and on since the project started; ever since > they killed KDE3, and I looked around for something as usable and practical > as the KDE3x desktop (which I first used on PC Linux, and later on Ubuntu > Hardy 8.04). (...) > In other words, it was the KDE desktop environment, and the default > settings therein, which were interfering with the smooth operation of TDE. This could be a *buntu problem. I am running TDE on various Debian based distributions as well as openSUSE, *with* KDE 4/5 apps (mostly kdenlive) and no such problem. (...) > > Bill Thierry

6 years, 10 months

Update on the Gemini Linux/Android phone

by dep

They've shipped some units (though it appears mine may be a month or two away still), but today they released their state of play on Linux, which I thought may be of interest. As I've mentioned earlier, it's my hope to run TDE on this device. It's possible (though I'd be probably overly optimistic in expecting) that by the time I get the device, or anyone but the earliest backers get theirs, this will be much farther along. The information is here: https://www.indiegogo.com/projects/gemini-pda-android-linux-keyboard-mobile… It says in part: We have been extremely busy in the past few months to make sure that the Gemini user experience will be on par with the tremendous expectation that you all have for the device. For this reason, we decided to focus mainly on the Gemini hardware and the Android operating system running smoothly on the device. Currently all manufactured Gemini devices will only have Android OS installed out of the box - you will have a bit more work to do to create a dual-boot Gemini device running Linux and Android. . . . We have developed a Gemini Flashing Tool that will enable you to partition your Gemini flash memory and install Linux alongside Android. The Gemini Flashing Tool runs on a standard PC (in fact it should be able run on Windows, Mac and Linux) and it’s basically a front-end to well know utilities such as adb, Xflash and fastboot. It will guide you through the various steps needed to install Linux on the Gemini, allowing you to choose the space to be reserved for Android and for Linux. By using the partition tool you will basically transform your Android-only Gemini into a dual boot Android/Linux Gemini (and back, if you wish so). You can also use the tool to manually update Android, for example to install a rooted Android version. Now, on to the much debated point – the choice of Linux distribution available for the Gemini. You might remember that we said in the past that we planned to release a Debian firmware. This will not change, Debian is going to be supported, even though we are sorry to say that we haven’t been able to allocate resources to it lately, and as a result we did not make much progress in terms of supported drivers (yet). However, we are thrilled to say that other Linux flavours have been ported to Gemini too! We also said that we want to enable the device to run many different version of Linux. We are really excited to say that at the moment we have the following Linux distributions fully or partially running on the Gemini: Debian Sailfish OS Ubuntu 17.04 Postmarket OS (an experimental version running Hildon UI – may look familiar to MeeGo/Maemo users) Special Mention: a few months back we got in touch with some open source members and in particular with Nikita Ukhrenkov. Nikita really helped us in many ways, and led a community effort to port a number of Linux-based operating systems on the Gemini. Nikita will be joining us at our stand at the Mobile World Congress in Barcelona (Hall 7 stand 7K40) and he will be showing some of the Linux version at out Linux showcase next week. Please note that although many functionality are already working (including 4G connection on Sailfish!), these are still early days and as such we still have to deal with performance issues, missing drivers, keyboard layouts and other issues. However, we believe that Linux is well underway for the Gemini and with your help we can take it much further.. If you think you can help us developing things further, please jump in, it’s now the right time! The various Linux firmware and the partition tool, will be available on our new support Website support.planetcom.co.uk .Please mark this Web address, as this is the place that will contain official information regarding Gemini support, tutorials, tips and software downloads for your Gemini. If you are a developer and want to talk to us or get in touch with other fellow developers, you can do so now using our new developer forum: http://developer.planetcom.co.uk/ We hope this website will simplify the coordination of new and already existing projects, for example the work carried on by Adam Boardman at https://github.com/gemian/gemini-keyboard-apps/wiki, to whom we are really grateful. We are also now confirming that we will be opening the source code for the Linux kernel and the boot loader for the Gemini. We know that some users have been asking for this in order for the Linux developer community to be able to contribute properly. [eoq] This all seems interesting and hopeful. Am I right in thinking that if Debian runs on it, TDE will as well? -- dep The shortest distance between you and playing great acoustic guitar: the great new instructional DVDs from Marjorie Thompson, available at www.MarjorieThompson.com

6 years, 11 months

Keyboard Problems us_intl

by Christian Schmitz

Hello everyone: I have a opensuse tumbleweed, i found and install TDE since 2 days. Everything seen right but i have a little problem: MY KEYBOARD. The situation: I am spanish talker, but i have a english keyboard. Normally i use us_intl variant with sucess. Before to install TDE i used Plasma with us_intl without problem, even the terminal TTY1 is working us_intl. The problem: Now in trinity i see that INTL variant does not work, only english layout. I dont know but also dont work the quotation marks so is unposiible write some like printf("hello" ); into kate . The most strange: Firefox and libreoffice work with the intl variant under TDE (i cant program but at least i can write a letter jejejeje) What tested: 1)system preferences>keyboard layout> generic105key (intl) Rebooted and nothing 2)Disable keyboards layout Rebooted and nothing Also i noted that i have a small applet of IBUS for emojis..... is possible disable it? How? I do not use emojis.Can be this are disturbing? Best Regards Christian -- Be Free, Be Linux

6 years, 11 months

arts from source code with JACK

by Dave

I can't seem to compile arts from source code with JACK. I can turn off the Jack option and all compiles correctly. This from the recent LinuxFromScratch build. Jack2-1.9.12 Trinity R14.0.4 from git pack Environment used: INFOPATH=/usr/share/info LD_LIBRARY_PATH=/opt/trinity/lib:/usr/local/tqt3/build-t/lib:/usr/local/tqt3/lib:/opt/trinity/include/jack MANPATH=/usr/share/man PATH=/usr/local/tqt3/bin:/usr/local/mysql/bin:/usr/local/sbin:/usr/local/bin:/bin:/usr/bin:/sbin:/usr/sbin:/opt/trinity/bin PKG_CONFIG_PATH=/opt/trinity/lib/pkgconfig:/usr/local/tqt3/build-t/lib/pkgconfig:/usr/local/lib/pkgconfig:/opt/trinity/include/jack DIRSTACK=() LIBDIR=/opt/trinity/lib MANDIR=/opt/trinity/man QTDIR=/usr/local/tqt3 SYSCONFDIR=/etc/trinity XDG_CONFIG_DIRS=/etc/xdg/ XDG_DATA_DIRS=/usr/share/ XDG_RUNTIME_DIR=/tmp/xdg-root local DIR; for DIR in ${!PATHVARIABLE}; if [ "$DIR" != "$1" ]; then NEWPATH=${NEWPATH:+$NEWPATH:}$DIR; PREFIX=/opt/trinity XORG_PREFIX=/usr HOME=/root The error that kills the build: /sources/trinity/dependencies/arts/flow/audioiojack.cc:26:10: fatal error: jack/jack.h: No such file or directory locate jack.h finds /opt/trinity/include/jack/jack.h I notice that in the CMakeLists.txt, the files refers to var LIBJACK, which is not defined. I also remember seeing a reference to TQT3DIR somewhere, but can't find it not. did try TQT3DIR=/usr/local/tqt3 to no avail. If someone has dealt with this, a copy of your environment would be appreciated. any help before this makes me ......unrepairable. Dave

6 years, 11 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users