Could somebody please fix the https certificate? Firefox does not load https://trinitydesktop.org because it expired :-(
Nik
--
Please do not email me anything that you are not comfortable also sharing with the NSA.
Dr. Nikolaus Klepp
Einnehmerstraße 14
A-4810 Gmunden
Tel.: +43 650 82 11 724
email: office(a)klepp.biz
Trinity devs,
I'd like to help with updating Polish translation of Trinity. The first time I asked about this
was a long long time ago (year ago? maybe two?) and the reply was that a stable release is
planned Real Soon Now and all effort is going into that and so the translations have to wait. So
perhaps now that R14 is out is a good moment for this? I would need someone to guide me through
technical details of how to do a translation.
Janek
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez pomyłkę
prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or if you have received this message in error,
please notify the sender and delete it from your system.
Greetings all;
I finally lugged my lappy in and plugged it in with the idea of makeing
sure I had a working email setup for the install of Jessie on this
machine. Had to reboot twice, I assume because its is sorely in need of
a new battery. The special xenomai kernel that can run LinuxCNC in
simulation mode found something it didn't like first time up. Both
times the boot was delayed by a 10 minute spell of what I assume was
e2fsck since the drive led was on during those times.
It is now booted, and a 64 bit version of Min 17.1 is now a download in
progress since all the repo's for mint 14 have vanished like the morning
fog. Xfce version I believe since this thing is certifiably in the Ford
model T horsepower range today.
Are there any gotcha's other than the formatter during the install and
network crap I'll have to nuke after the install before I burn it and
reinstall?
I have a mouse plugged in. As I see that on 14, both the touchpad and
the mouse are active, what is the name of the utility that completely
disables the touchpad if a real mouse is found?
Thanks all.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
Hi guys,
New problem ! Following an upgrade to Debian Jessie, TDE 14 Desktop,
when booting up, everything is fine until the machine gets
to "Loading the Desktop". At this point it seems to hang for a
minute or so before becoming a blank blue screen with only the mouse
cursor present. From here the only thing that can be done is to
select VT1 and login manually, typing "startx" gets to the Desktop.
I've noticed that only VT1 will get to the Desktop and all the other
terminals except VT8 leave you with a blue background, whilst VT8 now
has just a tiny blinking cursor on a black screen which has no
response to anything.
Where do I need to look in order to put things back to normal ?
Thanks in advance.
--
Best Regards:
Baron
Hi all;
Whenever I do a package-manager or synaptic refresh, I am getting a
squawk about missing keys, specifically about a mozilla update from
wheezy-backports.
And I just discovered that this error window can now be highlighted for a
copy/paste, the lack of which I have silently bitched about for years.
Whoever fixed that I owe a case of suds to, hold up ypur hand and
identify yourself. Thank you very much.
So here is the error message from synaptic:
=======
W: GPG error: http://mozilla.debian.net wheezy-backports Release: The
following signatures couldn't be verified because the public key is not
available: NO_PUBKEY 85A3D26506C4AE2A
W: A error occurred during the signature verification. The repository is
not updated and the previous index files will be used. GPG error:
http://http.debian.net wheezy-updates Release: The following signatures
were invalid: BADSIG 8B48AD6246925553 Debian Archive Automatic Signing
Key (7.0/wheezy) <ftpmaster(a)debian.org>
W: Failed to fetch http://http.us.debian.org/debian/dists/wheezy/Release
Unable to find expected entry 'updates/binary-i386/Packages' in Release
file (Wrong sources.list entry or malformed file)
W: Failed to fetch
http://http.debian.net/debian/dists/wheezy-updates/Release
W: Some index files failed to download. They have been ignored, or old
ones used instead.
==========
Looks like I am missing 2 gpg sigs then.
I assume there is an apt-get or apt-key command that I can invoke, but
I'll be dipped if I can remember how it works.
Can someone show me the cli command?
Thanks.
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
Hi Slávek et al
Today a libreoffice was deployed for jessie and it crashes allway with a
sigsegv in R14 (nothing else testable here).
I purged all libreoffice files and reinstalled it completly new but it crashes
too.
Do you or some one else has an idea why and a solution?
Fine regards
Rolf
On Sunday 05 April 2015 22.52:45 andre_debian(a)numericable.fr wrote:
> You are lucky :-)
>
> I installed "kvkbd-trinity", but no onscreen-keyboard,
> on my touchscreen computer with Jessie.
(...)
> I can open applications and close applications with fingers,
> but no onscreen-keyboard.
What onscreen keyboard did you install? I installed kvkdb from the
repositories Slavek indicated. The keyboard does not "pop up" by itself as on
Android (but then it does not pop up when I have a physical keyboard either,
as "onscreen" does). I put an icon in the Panel and "call" it when needed.
I don't know how this would work with a lock screen however...
> Also, impossible to zoom with the 3 fingers.
I doubt tdm knows about 3 fingers and I also doubt it would be easy to teach
it. That's probably what KDE 4 devs meant when they justified the new version
because KDE 3 was impossible to make "touch friendly".
> It does't come from the computer, because everything
> works well with Windows-8.
It comes from the fact that, if you use Trinity, you're basically using year
2000 software, and there were no tablets (at least running Linux) at the
time.
It's a little like criticising a 1970's car for not providing airbags...
I don't know how or when KDE4 / Gnome 3 / Unity will get "tablet ready", but I
must say I'm quite pleased with the fact that TDE "can be used" on a tablet,
although it was not written for one!
> Thanks.
>
> André
Basically, what I always thought proves to be right: those that are
despreately trying to develop a user interface supposed to "scale" from a
Desktop to a Tablet will fail, because a good Table interface will always
feel clumsy on a big screen with a mouse (things too big, set up too
streamlined) and a Desktop interface is quite unusable on a Tablet (unless
you are fitted with stylus-like fingers, which is not my case).
So if you put a desktop system on a tablet, you should not expect the same
experience as Android. Apple is the only one to do it right: IOS is quite
different from the OS X desktop. A pity it's made by Apple and suffers from
Apple's policy.
Thierry
multi wrote:
> Hi,
> I'm using Trinity 3.5.13.2 that was installed with exe GNU linux. I
have a bash script to mount a shared folder from a remote server
and > open it
> in a window. I launch it from a desktop icon. It looks like this:
> sudo mount 192.168.0.2:/home/dpjungk/Share /mnt/nfs/client1
> nautilus /mnt/nfs/client1
> It works fine -- except that, if I close the window and want to
> reopen it, it
> obviously asks for the password every time.
Does it have to be nautilus and nfs? Have you tried
nfs://192.168.0.2/home/dpjungk/Share/ (or sftp://...) in Konqueror?
Konqueror can save login info and I think network logins are
automatic/transparent, but most of my LAN logins are via ssh key-pairs
(sftp, rsync, scp and ssh) so I'm not sure.
Hi
I saw on Archlinux wiki there are a compiled version, sometimes work
others not.
Server = http://trinity.ceux.org/r14/x86_64
I would like to contact who manage this repository, cause I want to
mirror it.
My server has good bandwitdh (it's in University campus)
Thanks!
Adonay-Jonay Sanz
www.kademar.org
Hi all;
I did solve the previous complaint about the TDE version of kcalc losing
its binary input and bitfield display, by making two links in the
menu's, one to the old KDE kcalc, and one to the TDE kcalc.
But I/we have another problem. Back around kubuntu 6.04 LTS time, kcalc
had a pair of menu macros to do inch to metric, and metric to inch.
By ubu 10.04 LTS, those disappeared, apparently never to be seen again.
Whats chances those could be resurrected for the R14.2 version of TDE?
Surely the older codebase still exists someplace, and for us who live in
both worlds as I was in electronics for 55 years of my working life, and
that pair of macro's were, while they existed, handier than bottled beer
& sliced bread in keeping the two measurement worlds on the same page
around my piece of this planet. But now its gone. Sniff...
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
