tde-users

users@trinitydesktop.org

4290 discussions

video weirdness under R14
by dep 13 Jan '15

13 Jan '15

this is new. just went to print a DVD label with the lacie lightscribe software, which has always worked heretofore, though this was the first time i've used it since upgrading to R14. clicking the buttons is problematic -- because the buttons can't be seen; the whole thing is black per the attached window shot. ideas as to a fix? the application offers no controls for coloration, and it worked fine on the last release version of TDE. -- dep The shortest distance between you and playing great acoustic guitar: the great new instructional DVDs from Marjorie Thompson, available at www.MarjorieThompson.com

1 0

Problem with xserver-xorg-video-qxl and R14 with jessie
by rolf 12 Jan '15

12 Jan '15

Hi, I installed in a qemu-kvm a minimal wheezy:amd64 (whith absolutly no additional package), dist-upgrade to jessie:amd64 and the following packages (without any suggests): xserver-xorg-video-qxl xserver-xorg-video-vmware spice-vdagent dbus psmisc bzip2 unzip locales file ca-certificates pmount xorg tdebase-trinity desktop-base-trinity twin-trinity tdm-trinity tde-i18n-de-trinity knotes-trinity kcalc-trinity xterm After a reboot everything went fine, but after logout as normal user, qemu-kvm dies with the message "5416 Speicherzugriffsfehler" The VM is started with the additional options -soundhw ac97 -vga qxl -device virtio-serial-pci \ -device virtserialport,chardev=spicechannel0,name=com.redhat.spice.0\ -chardev spicevmc,id=spicechannel0,name=vdagent \ -spice port=${SPICEPORT},addr=${HOST},disable-ticketing I can not decide, if it is a problem of the qxl-videoserver (optimized for the spice-protocol) or something inside of Trinity. Fine regards Rolf

1 1

RE: [trinity-users] Raspberry TDM
by Dave Lers 10 Jan '15

10 Jan '15

Alexandre wrote: >> On Saturday 10 January 2015 14:29:32 Dave wrote: >> > Does the Raspberry Pi version have TDM, or are we stuck with >> > lightdm? > But, try tdm-trinity or tdm as a name, instead of lightdm. Probably dumb questions, but what is a display manager needed (VS used) for, and what are the relative merits (lightdm VS tdm)? I don't seem to have any DM's installed. If lightdm uses less system resources, does it follow that not using a DM uses even less?

2 1

trinity r14 and python/Tkinter
by schoenfeld 09 Jan '15

09 Jan '15

Hi, I installed trinity r14 on an openSuse 13.2 system using the repositories: http://tde-mirror.yosemite.net/trinity/trinity/rpm/opensuse13.2/trinity-r14… http://tde-mirror.yosemite.net/trinity/trinity/rpm/opensuse13.2/trinity-r14… this works very well! but when I tried to run a python script I got the following: kof@rzbn0052:~> python Python 2.7.8 (default, Sep 30 2014, 15:34:38) [GCC] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import Tkinter >>> master = Tkinter.Tk() Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib64/python2.7/lib-tk/Tkinter.py", line 1764, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) _tkinter.TclError: unknown color name "BACKGROUND" >>> before the trinity installation it worked. any idea? sume system information: kof@rzbn0052:->uname -a Linux rzbn0052 3.16.7-7-desktop #1 SMP PREEMPT Wed Dec 17 18:00:44 UTC 2014 (762f27a) x86_64 x86_64 x86_64 GNU/Linux kof@rzbn0052:->cat /etc/os-release NAME=openSUSE VERSION="13.2 (Harlequin)" VERSION_ID="13.2" PRETTY_NAME="openSUSE 13.2 (Harlequin) (x86_64)" ID=opensuse ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:opensuse:13.2" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://opensuse.org/" ID_LIKE="suse" Regards Wolfgang -- Wolfgang Schönfeld Helmholtz Center Geesthacht Institute of Coastal Research Max-Planck-Str. 1 21502 Geesthacht Germany Phone: +49 4152 87 1576 Fax: +49 4152 87 1596 Helmholtz-Zentrum Geesthacht Zentrum für Material- und Küstenforschung GmbH Max-Planck-Straße 1 I 21502 Geesthacht I Deutschland/Germany Geschäftsführer/Board of Management: Prof. Dr. Wolfgang Kaysser, Dipl.-Ing. Michael Ganß Vorsitzender des Aufsichtsrates/Chairman of the Supervisory Board: MinDirig Wilfried Kraus Amtsgericht Lübeck HRB 285 GE (Register Court) Internet: http://www.hzg.de

3 3

Re: [trinity-users] R14 Kpilot and KOrganizer Reminder Daemon Problems.
by Timothy Pearson 09 Jan '15

09 Jan '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA224 > I'm not sure what that means, but there is is. I'll sign up for an > account on > your bug tracker and post more there later, thank you. Thanks for that! Unfortunately the interesting part of the backtrace is not shown; you will need to press Return when prompted until you are dumped back at the (gdb) prompt then post the entire text block that gdb spat out. Also, on looking closer it seems that we did not build a debug symbols package for kpilot-trinity. I am fixing that right now, but testing would require you to update kpilot-trinity to the latest nightly builds and install the new kpilot-trinity-dbg package (once it builds that is!). Is this an option? > Where can I find the full build log? Just set Konsole or similar to an unlimited line history, then issue the dpkg-buildpackage command against a freshly downloaded pacakge and wait for the error. Copy everything after the dpkg-buildpackage command (including the command itself) into a new text file and attach that file to a reply message. :-) Tim -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iFYEARELAAYFAlSvOLwACgkQLaxZSoRZrGGQ0ADgs0eqygTmT6cgzHiJ9Gq9huBg 7gjRf3gXxZHaFwDdHlLr7FuI/xW4QH4bZ08PhotUp2E66WW24DTndw== =JvIB -----END PGP SIGNATURE-----

2 1

Recent outage
by Timothy Pearson 08 Jan '15

08 Jan '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA224 All, As you are probably already aware at around 13:20 GMT 01/07/2015 all TDE services went offline. This was due to a widespread power outage; to make matters worse the site's backup generator froze and did not start in time due to the extreme cold in the area. All services should now be restored, however as this was a full outage I expect that there may be some remaining issues that I am not yet aware of. Please let me know if you see anything still down or malfunctioning at this point. As always we need your support to stay online! If you can, please help the project stay online: https://trinitydesktop.org/donate.php Thank you for your patience! Timothy Pearson Trinity Desktop Project -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iFYEARELAAYFAlSuq1QACgkQLaxZSoRZrGERYQDggPrv0YSyas69nGVzfwAotR7K WUq7+gMmfrphTgDfSkwKzjfUs/KHEmDElPemYuGb/Jw+FgzDIJgaOg== =ADoJ -----END PGP SIGNATURE-----

1 0

K3B-Trinity will not install on R14
by Marc Chénier 07 Jan '15

07 Jan '15

I use Ubuntu Precise with the R14.0.0 TDE desktop on an amd64 system. I tried to install k3b-trinity with apt-get install and then with apt-get -f install. I have never had problems beforehand installing new packages with apt-get. The reply I get (in French) translates to something like : +++++++++ Certain packages cannot be installed... The following packages have unmet dependancies : k3b-trinity : Depend: libk3b3-trinity (= 4:14.0.0-r201-0ubuntu12.04.0+pr34) but 4:14.0.0-s-0ubuntu12.04.0+0 is to be installed Depend: k3b-data-trinity (= 4:14.0.0-r201-0ubuntu12.04.0+pr34) but 4:14.0.0-s-0ubuntu12.04.0+0 is to be installed E: Impossible to correct problems, the defective paquages are in « garder en l'état » mode. ++++++++ My understanding (am i correct?) is that k3b-trinity depends on 2 packages older than what I have on my computer (I checked). So what can i do to install k3b so that I can burn a new tde-live-disk for my "new" hand-me-down laptop? Thanks in advance. Marc

4 9

Libreoffice interface problem in R14
by Robin Collins 05 Jan '15

05 Jan '15

2 2

Amarok files limit
by Dave 05 Jan '15

05 Jan '15

I've noticed a problem with Amarok. I seems it cannot scan and catalog into the database any more than 12607 music files. Does not matter if it's with SQLite or MySQL. the progress bar climbs to 13 percent and never advances eventually disappears, showing a partial collection list. it does stop indexing but there are over 60,000 files in the music directory. I can use the files tab and "grab the music directory" and drag to playlist, and about 40 mins later all files show up in playlist, and they do play and have tag info, but collection tab doesn't show all that are in the playlist. Doesn't seem to leave any clue in a log file. All files have the same owner:group and attributes. amarok-1.14.10 in Trinity-3.5.13.2 on Debian Wheezy

4 5

DCOP error
by Robby Kitchen 04 Jan '15

04 Jan '15

I just installed TDE R14.0.0 on top of a Xubuntu 14.04 install, going through Synaptic. Everything went very smooth, it was done in just a few minutes and the pc restarted and logged in using the same password I had for Xubuntu, since TDE did not ask me to set a password. I just assumed that is what I needed to use. Everything was going good, I was just going through the Control Center exploring trying to get familiar with the settings, until I came across one, (I don't remember now which one), but it needed a password before I could open it to make changes. I put in the same password I had just used, but got an error message saying that wasn't the right password. Just to be sure I knew what I was doing, I rebooted and logged back in the second time with the Xubuntu password. However I could not get that password to work for anything other than logging in. I even tried to reset my password using that one, but again it said incorrect password. So I did some research on the internet, and found instructions on how to reset a users password, by booting into advanced options and going to the recovery settings, opening a command line, and typing in "password <usenamer>", so I did that and set up another password I would remember easily. Rebooted, got back to log-in screen, put the new password in, and an error msg popped up, something about not being the right password. Then gave me an error about "DCOP server error no read access to $home unable to start". I restarted tried the old password, and the new password both about three times, while searching the internet on another pc, trying to troubleshoot and find the problem, I didn't find very much and what I did find, didn't work; I tried going back into advanced start options and change password back, it failed, saying that it wasn't secure enough. I completely understand the need to keep things and people safe, and not everybody needs access to certain parts of the OS, however I feel that if I don't want a password, I should not be forced to use one. The whole point of Linux is to use what you like, and not be forced to do what someone you've never me thinks you should do. I could use a different D/E, that wouldn't require a password for anything but the terminal, but then it wouldn't be TDE. I used TDE for about 3 weeks a long time ago, then Ubuntu upgraded and TDE was no longer supported, because a different file system or something was used, and when I emailed the support people, I was told it probably wouldn't be upgraded, At least that what the email I got said. So I have just been checking in periodically to see if it ever came back up, and was very happy to see it had. . I really like TDE, so I am hoping I can find an easy fix for this. I installed it last night just before gong to bed, so it's been installed less than 12 hours right now, it wouldn't be a big deal to reinstall from here. Other than being annoying and aggregating. Has anyone seen this error, and know how to correct it? I searched google for a while before writing in, and could not find anything that actually works for me. I generally avoid this kind of issue since it's very easy to bork a system, if your not careful. Thank You Robby Kitchen

5 5

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users