19 Sep
2014
19 Sep
'14
3:37 a.m.
Just bought my first blu-ray drive, for data archives. Support for
blu-ray was added to K3B in version 2.0, current is 2.02.
Is it possible to add blu-ray support to legacy, v1.05 in TDE R14, K3B ?
I can burn blu-ray with growisofs from the cli, prefer K3B.
----
Peace,
Greg
19 Sep
19 Sep
4:35 a.m.
New subject: R: [trinity-users] K3B blu-ray support
Just bought my first blu-ray drive, for data archives.
Support for
blu-ray was added to K3B in version 2.0, current is 2.02.
Is it possible to add blu-ray support to legacy, v1.05 in TDE R14, K3B ?
I can burn blu-ray with growisofs from the cli, prefer K3B.
Hi Greg,
I can't answer 'yes' or 'no' at the moment because I have no idea what
kind of effort is required for that.
But I invite you to file an enhancement request on bugszilla so that the request
doesn't get lost in time.
It would be a worthwhile addition to K3B though :)
Cheers
Michele
10:13 a.m.
New subject: lost kpowersave
hello,
I was trying to upgrade from squeeze to wheezy and have found
kpowersave-trinity, though it appears on the taskbar, doesn't seem to
register anything; it just says, "disable actions on
inactivity/Help/Quit".
I used the wheezy source-list from the trinity-desktop site and the
source list from Hare's exegnu version. I've tried turning it on and
off, purging and reinstalling, rebooting.
it would be nice to have it back; it's a laptop. was working fine on
it before I did the update.
not sure what further info to provide.
F.
--
Felmon Davis
The e-mail of the species is more deadly than the mail.
2:10 p.m.
New subject: R: [trinity-users] lost kpowersave
I was trying to upgrade from squeeze to wheezy and have
found
kpowersave-trinity, though it appears on the taskbar, doesn't seem to
register anything; it just says, "disable actions on
inactivity/Help/Quit".
Not sure which version of TDE you are running, anyhow in
the main development trunk kpowersave has been replaced by tdepowersave.
Cheers
Michele
3:53 p.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
On Fri, 19 Sep 2014, Michele Calgaro wrote:
that's not offered via apt-get.
I'm using the sources.list from the trinity-desktop site referred to
under 'wheezy'. other than that I'm not sure how to determine the
version of TDE.
F.
--
Felmon Davis
Luck: Careful planning, well executed.
I was trying
to upgrade from squeeze to wheezy and have found
kpowersave-trinity, though it appears on the taskbar, doesn't seem to
register anything; it just says, "disable actions on
inactivity/Help/Quit".
Not sure which version of TDE you are running, anyhow
in the main development trunk kpowersave has been replaced by tdepowersave.
Cheers
Michele
9:45 p.m.
New subject: how do I find tdepowersave? was: lost kpowersave
On Fri, 19 Sep 2014, Michele Calgaro wrote:
can someone help me find tdepowersave?
I've got ppa-quickbuild lines in 'sources.list' referring to
'trinity-v3.5.13'.
'apt-get install tdepowersave' doesn't yield the package; 'apt-cache
search' says 'kpowersave-trinity' is available.
however, as I posted, this seems blind and deaf.
F.
--
Felmon Davis
Luck: Careful planning, well executed.
I was trying
to upgrade from squeeze to wheezy and have found
kpowersave-trinity, though it appears on the taskbar, doesn't seem to
register anything; it just says, "disable actions on
inactivity/Help/Quit".
Not sure which version of TDE you are running, anyhow in the main
development trunk kpowersave has been replaced by tdepowersave.
Cheers
Michele
9:49 p.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
On Fri, 19 Sep 2014, Lisi Reisz wrote:
On Friday 19 September 2014 16:53:48 Felmon Davis
wrote:
sorry, didn't see your reply before just posting mine! yeah, it's
3.5.13.1 as indicated also by my 'sources.list'.
F.
--
Felmon Davis
So so is good, very good, very excellent good:
and yet it is not; it is but so so.
-- William Shakespeare, "As You Like It"
I'm not sure how to determine the
version of TDE.
Run a TDE application. Click on "help". Choose "about Trinity".
4:49 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
On Sat, 20 Sep 2014, Michele Calgaro wrote:
ok.
back to the original question: I'm still wondering why it is no longer
working after the upgrade from squeeze wheezy.
F.
--
Felmon Davis
A man with two clocks never knows exactly what is the time.
sorry,
didn't see your reply before just posting mine! yeah, it's
3.5.13.1 as indicated also by my 'sources.list'.
In 3.5.13.1 tdepowersave did not exist, only kpowersave is available.
Cheers
Michele 
4:56 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
Have you reinstalled it? Sometimes with upgrades things go wrong and the
easiest and quickest way to fix it is to reinstall the offending packages.
On 20 September 2014 14:49, Felmon Davis <davisf(a)union.edu> wrote:
On Sat, 20 Sep 2014, Michele Calgaro wrote:
sorry, didn't see your reply before just posting mine! yeah, it's
ok.
back to the original question: I'm still wondering why it is no longer
working after the upgrade from squeeze wheezy.
F.
--
Felmon Davis
A man with two clocks never knows exactly what is the time.
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe@
lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help@lists.
pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.
pearsoncomputing.net/
Please remember not to top-post: http://trinity.
pearsoncomputing.net/mailing_lists/#top-posting
3.5.13.1
as indicated also by my 'sources.list'.
In 3.5.13.1 tdepowersave did not exist, only kpowersave is available.
Cheers
Michele
5:18 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
On Sat, 20 Sep 2014, Michael . wrote:
Have you reinstalled it? Sometimes with upgrades
things go wrong and the
easiest and quickest way to fix it is to reinstall the offending packages.
yes, I did. for giggles I did it again making sure to 'purge' it. same
result. don't want to do this too much more else I get certified
insane.
I notice it is lodged in
/opt/trinity/bin/kpowersave
is this right? note no '-trinity' after the executable.
F.
On 20 September 2014 14:49, Felmon Davis <davisf(a)union.edu> wrote:
--
Felmon Davis
I plead contemporary insanity.
On Sat, 20 Sep 2014, Michele Calgaro wrote:
sorry, didn't see your reply before just posting mine! yeah, it's
ok.
back to the original question: I'm still wondering why it is no longer
working after the upgrade from squeeze wheezy.
F.
--
Felmon Davis
A man with two clocks never knows exactly what is the time.
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe@
lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help@lists.
pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.
pearsoncomputing.net/
Please remember not to top-post: http://trinity.
pearsoncomputing.net/mailing_lists/#top-posting
3.5.13.1
as indicated also by my 'sources.list'.
In 3.5.13.1 tdepowersave did not exist, only kpowersave is available.
Cheers
Michele
6:26 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
I notice it is lodged in
/opt/trinity/bin/kpowersave
is this right? note no '-trinity' after the executable.
That is right.
As for why it is not working, I can't say for sure. It may be that v3.5.13.1 and the
wheezy kernel don't get along too well.
Have you tried upgrading TDE to 3.5.13.2? I think there are quite a few users of Wheezy
and 3.5.13.2, so it should be easier to have feedback from them if you use the same
version.
As for me I am running Jessie and TDE development version, where kpowersave is no longer
used (actually it does not even build anymore in Jessie due to the lack of hal), so I can
only provide some general comments/guidelines.
Cheers
Michele
6:50 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
On Sat, 20 Sep 2014, Michele Calgaro wrote:
I notice it is
lodged in
/opt/trinity/bin/kpowersave
is this right? note no '-trinity' after the executable.
That is right. As for why it is not working, I can't say for
sure. It may be that
v3.5.13.1 and the wheezy kernel don't get along too well.
Have you tried upgrading TDE to 3.5.13.2? I think
there are quite a
few users of Wheezy and 3.5.13.2, so it should be easier to have
feedback from them if you use the same version.
if I simply replace '3.5.13' in 'sources.list' with '3.5.13.2' and
run
apt-get -s update
I get a lot of '404 Not Found'.
can you offer the lines you have in 'sources.list'?
F.
As for me I am running Jessie and TDE development
version, where
kpowersave is no longer used (actually it does not even build
anymore in Jessie due to the lack of hal), so I can only provide
some general comments/guidelines.
Cheers
Michele
--
Felmon Davis
Time may be a great healer, but it's a lousy beautician.
7:17 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
if I simply replace '3.5.13' in
'sources.list' with '3.5.13.2' and run
apt-get -s update
I get a lot of '404 Not Found'.
can you offer the lines you have in 'sources.list'?
Mine are:
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1…
wheezy main
deb-src
http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy
main
and I have 3.5.13.2 running. But I remember a simillar problem with kpowersave, when I
upgraded my thinkpads. It turned out to be an acpi issue that vanished after doing a clean
wheezy installation.
Can you configure the energy savings settings using kontrol?
Nik
F.
--
Please do not email me anything that you are not comfortable also sharing with the NSA.
Dr. Nikolaus Klepp
Einnehmerstraße 14
A-4810 Gmunden
Tel.: +43 650 82 11 724
email: office(a)klepp.biz
As for me I am running Jessie and TDE development
version, where
kpowersave is no longer used (actually it does not even build
anymore in Jessie due to the lack of hal), so I can only provide
some general comments/guidelines.
Cheers
Michele
7:32 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
if I simply replace '3.5.13' in
'sources.list' with '3.5.13.2' and run
apt-get -s update
I get a lot of '404 Not Found'.
can you offer the lines you have in 'sources.list'?
Actually I build my own packages :-)
If you want to use the pre v14.0.0 nightly builds, you should use something like
deb http://mirror.xcer.cz/trinity-sb wheezy deps-r14 main-r14
This is Slavek's own repository.
Otherwise if you want to use 3.5.13.2, you can use:
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1…
wheezy main
deb-src
http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy
main
NOTE: Do not replace 3.5.13 with 3.5.13.2. The repo already contains the 3.5.13.2 version
Cheers
Michele
7:41 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
On Sat, 20 Sep 2014, Dr. Nikolaus Klepp wrote:
ok, danke. I ran 'sudo apt-get -s update' without error.
if I simply
replace '3.5.13' in 'sources.list' with '3.5.13.2' and run
apt-get -s update
I get a lot of '404 Not Found'.
can you offer the lines you have in 'sources.list'?
Mine are:
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1…
wheezy main
deb-src
http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy
main and I have 3.5.13.2 running. But I remember a simillar
problem with
kpowersave, when I upgraded my thinkpads. It turned out to be an
acpi issue that vanished after doing a clean wheezy installation.
Can you configure the energy savings settings using kontrol?
before proceeding, what is 'kontrol'? is that 'control center'?
I have a problem there too: it seems to crash out at least when I do
some settings in admin mode, thus:
a) I go to 'control center' and enter 'admin mode'
b) I enable 'global display control'
c) go to 'power management'
d) hit 'apply' (whether I change anything or not)
e) I get the 'crash handler'
not sure how long it's been like this.
the settings are ok for now so one problem at a time.
F.
Nik
--
Felmon Davis
The probability of someone watching you is proportional to the
stupidity of your action.
F.
As for me I am running Jessie and TDE development
version, where
kpowersave is no longer used (actually it does not even build
anymore in Jessie due to the lack of hal), so I can only provide
some general comments/guidelines.
Cheers
Michele
7:43 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
top-posting this once: I got the correct 'sources.list' now. will do
an update in a bit.
F.
On Sat, 20 Sep 2014, Michele Calgaro wrote:
--
Felmon Davis
if I simply
replace '3.5.13' in 'sources.list' with '3.5.13.2' and run
apt-get -s update
I get a lot of '404 Not Found'.
can you offer the lines you have in 'sources.list'?
Actually I build my own packages :-)
If you want to use the pre v14.0.0 nightly builds, you should use something like
deb http://mirror.xcer.cz/trinity-sb wheezy deps-r14 main-r14
This is Slavek's own repository.
Otherwise if you want to use 3.5.13.2, you can use:
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1…
wheezy main
deb-src
http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy
main
NOTE: Do not replace 3.5.13 with 3.5.13.2. The repo already contains the 3.5.13.2
version
Cheers
Michele
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
7:46 a.m.
New subject: [trinity-users] R: [trinity-users] lost kpowersave
top-posting this once: I got the correct 'sources.list' now. will do
an update in a bit.
F.
On Sat, 20 Sep 2014, Michele Calgaro wrote:
--
Felmon Davis
if I simply
replace '3.5.13' in 'sources.list' with '3.5.13.2' and run
apt-get -s update
I get a lot of '404 Not Found'.
can you offer the lines you have in 'sources.list'?
Actually I build my own packages :-)
If you want to use the pre v14.0.0 nightly builds, you should use something like
deb http://mirror.xcer.cz/trinity-sb wheezy deps-r14 main-r14
This is Slavek's own repository.
Otherwise if you want to use 3.5.13.2, you can use:
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy
main
deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1…
wheezy main
deb-src
http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy
main
NOTE: Do not replace 3.5.13 with 3.5.13.2. The repo already contains the 3.5.13.2
version
Cheers
Michele
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
9:50 a.m.
New subject: no hald - related to: lost kpowersave
greets!
so I see there's no hal in '/etc/init.d'!
apt-get says the latest version is installed.
I'm considering removing hal and reinstalling it. seems quite risky
given everything that's associated with it.
I cannot rip up this machine too much though, not in busy season.
how should I proceed to restore hald?
F.
--
Felmon Davis
I don't know what your problem is, but I'll bet it's hard to pronounce.
12:14 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
From: lisi.reisz(a)gmail.com
To: trinity-users(a)lists.pearsoncomputing.net
Date: Sat, 20 Sep 2014 07:12:43 +0100
Subject: Re: [trinity-users] how do I find tdepowersave? was: lost kpowersave
On Friday 19 September 2014 22:45:06 Felmon Davis wrote:
Hi,
I'd suggest you to install your packages through Synaptic. It is not only easier, but
you also don't have to remember all the name of all the packages in your distro by
heart...
You just have to do a search for ''powersave'' in Synaptic and you'll
have it! We're in 2014, and while some tasks are still better made in Konsole, some
are better made with graphic tools.
Have a great day!
-Alexandre
I've got ppa-quickbuild lines in
'sources.list' referring to
'trinity-v3.5.13'.
Mine says that, but I have Wheezy and 3.5.12.2.
Lisi
1:23 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
You just have to do a search for
''powersave'' in Synaptic and you'll have it! We're in 2014, and
while some tasks are still better made in
Konsole, some are better made with graphic tools.
Funny thing, since opinions change from person to person. For example, IMO the best tool
to manage packages is aptitude from a terminal and I would never change that unless there
is a major reason for doing so ;-)
Cheers
Michele
1:32 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
Date: Sat, 20 Sep 2014 14:23:56 +0100
From: michele.calgaro(a)yahoo.it
To: trinity-users(a)lists.pearsoncomputing.net
Subject: RE: [trinity-users] how do I find tdepowersave? was: lost kpowersave
Of course, aptitude would do the trick too! But aptitude is pretty much a text-mode
Synaptic, so yes, it would work almost the same way.
It has a GUI (or I should say a TUI) where you can see the package lists. Then, you can
tick those you want to install and click on apply. Just like Synaptic.
-Alexandre
You just have to do a search for
''powersave'' in Synaptic and you'll have it! We're in 2014, and
while some tasks are still better made in
Konsole, some are better made with graphic tools.
Funny thing, since opinions change from person to person. For example, IMO the best tool
to manage packages is aptitude from a terminal and I would never change that unless there
is a major reason for doing so ;-)
Cheers
Michele
4:31 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
On Sat, 20 Sep 2014, Alexandre wrote:
chacun a son gout.
I find 'apt-get install kpowersave' pretty easy and though not the
best way, 'apt-cache search powersave' is usually enough for me.
I'm no command-line guru but clicking on pictures often makes me feel
I'm clicking in the dark.
de gustibus.
F.
From: lisi.reisz(a)gmail.com
To: trinity-users(a)lists.pearsoncomputing.net
Date: Sat, 20 Sep 2014 07:12:43 +0100
Subject: Re: [trinity-users] how do I find tdepowersave? was: lost kpowersave
On Friday 19 September 2014 22:45:06 Felmon Davis wrote:
Hi,
I'd suggest you to install your packages through Synaptic. It is not
only easier, but you also don't have to remember all the name of all
the packages in your distro by heart... You just have to do a search
for ''powersave'' in Synaptic and you'll have it! We're in 2014,
and
while some tasks are still better made in Konsole, some are better
made with graphic tools. I've got ppa-quickbuild lines in
'sources.list' referring to
'trinity-v3.5.13'.
Mine says that, but I have Wheezy and 3.5.12.2.
Lisi
Have a great day!
-Alexandre
--
Felmon Davis
There is always a wrong way to do something right. -- Christer
Sundqvist
4:34 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
Am Samstag, 20. September 2014 schrieb Felmon Davis:
I find 'apt-get install kpowersave' pretty
easy and though not the
best way, 'apt-cache search powersave' is usually enough for me.
This will most likely pull in kpowersave from KDE4 ...
I'm no command-line guru but clicking on pictures often makes me feel
I'm clicking in the dark.
de gustibus.
F.
--
Please do not email me anything that you are not comfortable also sharing with the NSA.
Have a great day!
-Alexandre
4:38 p.m.
New subject: [trinity-users] no hald - related to: lost kpowersave
On Saturday 20 of September 2014 11:50:40 Felmon Davis wrote:
greets!
so I see there's no hal in '/etc/init.d'!
apt-get says the latest version is installed.
I'm considering removing hal and reinstalling it. seems quite risky
given everything that's associated with it.
I cannot rip up this machine too much though, not in busy season.
how should I proceed to restore hald?
F.
Absence init script for hald is not a fault - is initialized from dbus daemon.
The question is, what's your kernel version - from distribution or backports?
--
Slavek
4:38 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
On Sat, 20 Sep 2014, Dr. Nikolaus Klepp wrote:
--
Felmon Davis
There is always a wrong way to do something right. -- Christer
Sundqvist
Am Samstag, 20. September 2014 schrieb Felmon Davis:
even though I'm using the wheezy 'sources.list'?
and the program is called 'kpowersave-trinity'?
f.
I find 'apt-get install kpowersave'
pretty easy and though not the
best way, 'apt-cache search powersave' is usually enough for me.
This will most likely pull in kpowersave from KDE4 ...
I'm no command-line guru but clicking on pictures often makes me feel
I'm clicking in the dark.
de gustibus.
F.
Have a great day!
-Alexandre
4:45 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
Am Samstag, 20. September 2014 schrieb Felmon Davis:
On Sat, 20 Sep 2014, Dr. Nikolaus Klepp wrote:
Yes, it is :-)
Nik
Am Samstag, 20. September 2014 schrieb Felmon
Davis:
even though I'm using the wheezy 'sources.list'?
and the program is called 'kpowersave-trinity'? I find 'apt-get install kpowersave'
pretty easy and though not the
best way, 'apt-cache search powersave' is usually enough for me.
This will most likely pull in kpowersave from KDE4 ...
f.
--
Please do not email me anything that you are not comfortable also sharing with the NSA.
Dr. Nikolaus Klepp
Einnehmerstraße 14
A-4810 Gmunden
Tel.: +43 650 82 11 724
email: office(a)klepp.biz
I'm no command-line guru but clicking on pictures often makes me feel
I'm clicking in the dark.
de gustibus.
F.
Have a great day!
-Alexandre
4:48 p.m.
New subject: [trinity-users] no hald - related to: lost kpowersave
On Sat, 20 Sep 2014, Slávek Banko wrote:
On Saturday 20 of September 2014 11:50:40 Felmon Davis
wrote:
from backports; 'uname -r' says:
3.2.0.0-0.bpo.4-686-pae
it's a dual-core Acer Aspire v5 laptop.
F.
--
Felmon Davis
greets!
so I see there's no hal in '/etc/init.d'!
apt-get says the latest version is installed.
I'm considering removing hal and reinstalling it. seems quite risky
given everything that's associated with it.
I cannot rip up this machine too much though, not in busy season.
how should I proceed to restore hald?
F.
Absence init script for hald is not a fault - is initialized from dbus daemon.
The question is, what's your kernel version - from distribution or backports?
5:10 p.m.
New subject: [trinity-users] no hald - related to: lost kpowersave
On Saturday 20 of September 2014 18:48:01 Felmon Davis wrote:
On Sat, 20 Sep 2014, Slávek Banko wrote:
So that explains it! Hal from distribution does not work properly with the
kernel from backports. I have updated hal packages, but so far I have not
uploaded this packages into my ppa.
--
Slavek
On Saturday 20 of September 2014 11:50:40 Felmon
Davis wrote:
from backports; 'uname -r' says:
3.2.0.0-0.bpo.4-686-pae
it's a dual-core Acer Aspire v5 laptop.
F. greets!
so I see there's no hal in '/etc/init.d'!
apt-get says the latest version is installed.
I'm considering removing hal and reinstalling it. seems quite risky
given everything that's associated with it.
I cannot rip up this machine too much though, not in busy season.
how should I proceed to restore hald?
F.
Absence init script for hald is not a fault - is initialized from dbus
daemon. The question is, what's your kernel version - from distribution
or backports?
5:19 p.m.
New subject: [trinity-users] no hald - related to: lost kpowersave
On Sat, 20 Sep 2014, Slávek Banko wrote:
On Saturday 20 of September 2014 18:48:01 Felmon Davis
wrote:
good news, in a way.
I had to use a kernel like this because of wifi.
F.
--
Felmon Davis
Fortune and love befriend the bold.
-- Ovid
On Sat, 20 Sep 2014, Slávek Banko wrote:
So that explains it! Hal from distribution does not work properly with the
kernel from backports. I have updated hal packages, but so far I have not
uploaded this packages into my ppa. On Saturday 20 of September 2014 11:50:40 Felmon
Davis wrote:
from backports; 'uname -r' says:
3.2.0.0-0.bpo.4-686-pae
it's a dual-core Acer Aspire v5 laptop.
F. greets!
so I see there's no hal in '/etc/init.d'!
apt-get says the latest version is installed.
I'm considering removing hal and reinstalling it. seems quite risky
given everything that's associated with it.
I cannot rip up this machine too much though, not in busy season.
how should I proceed to restore hald?
F.
Absence init script for hald is not a fault - is initialized from dbus
daemon. The question is, what's your kernel version - from distribution
or backports? 
5:32 p.m.
New subject: [trinity-users] how do I find tdepowersave? was: lost kpowersave
On Saturday 20 September 2014 17:34:39 Dr. Nikolaus Klepp wrote:
Am Samstag, 20. September 2014 schrieb Felmon Davis:
lisi@Tux-II:~$ aptitude search kpowersave
p kpowersave-trinity - HAL based power management applet
for Trinity
p kpowersave-trinity:i386 - HAL based power management applet
for Trinity
lisi@Tux-II:~$
It would appear that there is no such animal. ;-)
Lisi
I find 'apt-get install kpowersave'
pretty easy and though not the
best way, 'apt-cache search powersave' is usually enough for me.
This will most likely pull in kpowersave from KDE4 ...
> I'm no command-line guru but clicking on pictures often makes me feel
> I'm clicking in the dark.
>
> de gustibus.
>
> F.
>
> > Have a great day!
> > -Alexandre
7:01 p.m.
New subject: [SOLVED] no hald - related to: lost kpowersave
On Sat, 20 Sep 2014, Slávek Banko wrote:
On Saturday 20 of September 2014 18:48:01 Felmon Davis
wrote:
So that explains it! Hal from distribution does not work properly with the
kernel from backports. I have updated hal packages, but so far I have not
uploaded this packages into my ppa.
hello!
Slavek sent me some updates which fixed the kernel conflict.
kpowersave now seems alive and happy!
I note that '/opt/trinity/bin/kpowersave' is now at work.
many thanks especially to Slavek but also to everyone else since you
all helped get to the heart of the issue not to mention my
appreciation of the patient support!
F.
--
Felmon Davis
Vincit qui patitur: He conquers, who endures.
On Sat, 20 Sep 2014, Slávek Banko wrote:
[...]
Absence
init script for hald is not a fault - is initialized from dbus
daemon. The question is, what's your kernel version - from distribution
or backports?
from backports; 'uname -r' says:
3.2.0.0-0.bpo.4-686-pae
it's a dual-core Acer Aspire v5 laptop.
F.
3511
days inactive
3512
days old
33 comments
8 participants
participants (8)
-
Alexandre -
Dr. Nikolaus Klepp -
Felmon Davis -
Greg Madden -
Lisi Reisz -
Michael . -
Michele Calgaro -
Slávek Banko