On Saturday 20 June 2020 18.56:25 Dr. Nikolaus Klepp wrote: Said someting about a dependancy for kfiles or something like that. Anyway TDE did not start and as I rely on kdrc to access it remotely... For the moment I updated raspbian but not TDE. Given the use of this machine it's not a problem. That's the advantage with Intel based SBCs, you can install regular Debian. Thierry --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

On Saturday 20 June 2020 23.32:52 E. Liddell wrote: Thank you for the information, I'll take a look at that. Thierry --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

Thierry de Coulon wrote: FYI: I installed TDE on RPi4 some time ago without any issue. Poppler comes from debian. poppler-tqt from TDE. --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

On Sunday 21 June 2020 02:30:42 deloptes wrote: Which version of tde? I rather like its ability to manage multiple workspaces, and my current gui on the rpi4, LXDE, does a poor job of that, not remembering a hard to configure 4 pane setup over a reboot, its easier to ssh -Y into it several times when building LinuxCNC .deb's from scratch. From other machines with more comfortable seating. I use R14.0.8 on two machines here, but not on the rpi4. It is a hair hard on latency's though, a point where the pi's can use all the help they can get since there is not a port of RTAI to the armhf's. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

Gene Heskett wrote: The PB and the DEV (14.1) on raspbian and debian I don't have CNC and can't comment. The kernel is an issue as the debian kernel did not work (buster) - I am not sure if it now works though. --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

Gene Heskett wrote: Debian works perfectly fine. The only problem is the debian kernel. I just copied the raspbian kernel (+ modules/firmware) and all works fine. I was going to test newer kernel and did compile one - but did not find the time to test. So the only thing from raspbian you need is the kernel. I am not sure about the hosts file. I actually used raspbian only to debootstrap debian :) --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

Anno domini 2020 Sun, 21 Jun 11:22:35 +0200 deloptes scripsit: Have you used arm64? If yes, did you get vc working? Nik -- Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ... --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

On Sunday 21 June 2020 05:36:44 Dr. Nikolaus Klepp wrote: But its needed to get the lower latencies that machine control demand. For the rpi4b I cajoled raspbian out of a src file only, no support preempt-rt kernel, rebuilt it several times as it defaults to building a whole bunch of stuff that has never been in the same room with a pi, then to install it I cherry picked the pi stuff, tarballed it into about a 30 meg file, and unpacked that over the top of the /booot on the card, replaceing the raspbian stuff, fixed the hard coded drive identifiers and configured my network, all in a card reader. That was before I had the heart attack last fall and spent much of the winter in and out of the cath-lab at WVU/Ruby in Morgantown, getting stents installed here and there, not all in my heart, but culminating in a new aortic valve installed in January, and one of the stents in my ticker clogged up and had to be replaced 2 weeks back. Being a long term DM-II has caught up with me, and I'm running out of time at 85, but that pi4 is still running that kernel and my big lathe quite nicely. The main diff is that all the overlay stuff that clutters up the debian "/boot" file system has been moved to a subdir in /boot for the pi's. Gotta be different stuff. Armbian works fine on the hardkernel stuff, rock64-pro etc, doesn't work in the pi's for the same reason. But hardkernel folks simply ignore any requests for realtime support. Their way or the highway. Them, and the camel that rode in on them. That r-pi4b has two bigger ssd's plugged in via usb3 adapters, and I do all the devel work on them so a 64G sd card only gets write abused by apt, keeping the rest of the system up to date. I had to get rid of the swap file on the sd card as it wasn't big enough to build LinuxCNC on a 2G pi, making a swap partition on one of the ssd's, so that write abuse of the u-sd is removed. Then tiger direct had a sale on rebuilt 650 watt cyberpower UPS's at $40, w/free ship, looked brand new to me, so it doesn't even get rebooted by a local power failure since there's a 20kw nat gas fired generator just outside the back door thats up and carrying the whole place, AC and all in 5 or 6 seconds. I see notes in the log that its on standby for 30 secs now and then. Shrug. Thanks deloptes. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> --------------------------------------------------------------------- To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/ Please remember not to top-post: http://trinity.pearsoncomputing.net/mailing_lists/#top-posting