7 Aug
2016
7 Aug
'16
8:30 p.m.
Hello
This is probably not related to TDE, but Linux in general (Debian 8?).
I have a multimedia PS/2 keyboard "BTC 9001" (evtest reports it as
"AT Translated Set 2 keyboard") and I try to use all its keys. Some are
typical multimedia keys, while I program some other to launch
applications in my TDE using "Keyboard actions" panel. Unfortunately
not all keys are detected in OS by scancodes. Two keys generate only a
EV_MSC event, while not giving scancode.
Is it possible, by e.g. udev hwdb rule, to assign scancodes to these
events?
Here are results of evtest events test:
Testing ... (interrupt to exit)
Event: time 1470587826.798369, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1c
Event: time 1470587826.798369, type 1 (EV_KEY), code 28 (KEY_ENTER),
value 0
Event: time 1470587826.798369, -------------- EV_SYN ------------
Event: time 1470587829.689519, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.689519, type 1 (EV_KEY), code 30 (KEY_A), value
1
Event: time 1470587829.689519, -------------- EV_SYN ------------
Event: time 1470587829.753248, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.753248, type 1 (EV_KEY), code 30 (KEY_A), value
0
Event: time 1470587829.753248, -------------- EV_SYN ------------
Event: time 1470587836.420023, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.420023, type 1 (EV_KEY), code 217 (KEY_SEARCH),
value 1
Event: time 1470587836.420023, -------------- EV_SYN ------------
Event: time 1470587836.504746, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.504746, type 1 (EV_KEY), code 217 (KEY_SEARCH),
value 0
Event: time 1470587836.504746, -------------- EV_SYN ------------
Event: time 1470587839.705553, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.705553, -------------- EV_SYN ------------
Event: time 1470587839.782562, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.782562, -------------- EV_SYN
------------
Event: time 1470587840.546297, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.546297, -------------- EV_SYN ------------
Event: time 1470587840.648616, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.648616, -------------- EV_SYN ------------
Event: time 1470587842.578400, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1d
Event: time 1470587842.578400, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL),
value 1
Event: time 1470587842.578400, -------------- EV_SYN ------------
Event: time 1470587842.761042, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 2e
Event: time 1470587842.761042, type 1 (EV_KEY), code 46 (KEY_C), value
1
Event: time 1470587842.761042, -------------- EV_SYN ------------
The keys pressed are: Return key released, A, then "Search"
custom key which works, then "Manual" and "Panel" keys (these two
don't work - no scancode), then ctrl-C to stop evtest.
MCbx
P.S. And again my webmail removed newlines in my previous post... sorry
for inconvenience, ignore the previous one.
7 Aug
7 Aug
8:42 p.m.
New subject: [trinity-users] [probably OT] How to add a scancode?
Hi!
I suggest you use "xbindkeys" for things like this, 'cause TDE hotkey
management is somewhat 'interesting'. For example, I cannot bind
<windows>+<up|down> to move to the next desktop. With xbindkeys it works:
# ~/.xbindkeysrc
#WIN+UP
"dcop twin KWinInterface previousDesktop"
m:0x40 + c:111
Mod4 + Up
#WIN+DOWN
"dcop twin KWinInterface nextDesktop"
m:0x40 + c:116
Mod4 + Down
#MOUSE BUTTON8
"dcop twin KWinInterface nextDesktop"
b:8
Nik
Am Sonntag, 7. August 2016 schrieb iadest(a)o2.pl:
Hello
This is probably not related to TDE, but Linux in general (Debian 8?).
I have a multimedia PS/2 keyboard "BTC 9001" (evtest reports it as
"AT Translated Set 2 keyboard") and I try to use all its keys. Some are
typical multimedia keys, while I program some other to launch
applications in my TDE using "Keyboard actions" panel. Unfortunately
not all keys are detected in OS by scancodes. Two keys generate only a
EV_MSC event, while not giving scancode.
Is it possible, by e.g. udev hwdb rule, to assign scancodes to these
events?
Here are results of evtest events test:
Testing ... (interrupt to exit)
Event: time 1470587826.798369, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1c
Event: time 1470587826.798369, type 1 (EV_KEY), code 28 (KEY_ENTER),
value 0
Event: time 1470587826.798369, -------------- EV_SYN ------------
Event: time 1470587829.689519, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.689519, type 1 (EV_KEY), code 30 (KEY_A), value
1
Event: time 1470587829.689519, -------------- EV_SYN ------------
Event: time 1470587829.753248, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.753248, type 1 (EV_KEY), code 30 (KEY_A), value
0
Event: time 1470587829.753248, -------------- EV_SYN ------------
Event: time 1470587836.420023, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.420023, type 1 (EV_KEY), code 217 (KEY_SEARCH),
value 1
Event: time 1470587836.420023, -------------- EV_SYN ------------
Event: time 1470587836.504746, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.504746, type 1 (EV_KEY), code 217 (KEY_SEARCH),
value 0
Event: time 1470587836.504746, -------------- EV_SYN ------------
Event: time 1470587839.705553, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.705553, -------------- EV_SYN ------------
Event: time 1470587839.782562, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.782562, -------------- EV_SYN
------------
Event: time 1470587840.546297, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.546297, -------------- EV_SYN ------------
Event: time 1470587840.648616, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.648616, -------------- EV_SYN ------------
Event: time 1470587842.578400, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1d
Event: time 1470587842.578400, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL),
value 1
Event: time 1470587842.578400, -------------- EV_SYN ------------
Event: time 1470587842.761042, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 2e
Event: time 1470587842.761042, type 1 (EV_KEY), code 46 (KEY_C), value
1
Event: time 1470587842.761042, -------------- EV_SYN ------------
The keys pressed are: Return key released, A, then "Search"
custom key which works, then "Manual" and "Panel" keys (these two
don't work - no scancode), then ctrl-C to stop evtest.
MCbx
P.S. And again my webmail removed newlines in my previous post... sorry
for inconvenience, ignore the previous one.
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
--
Please do not email me anything that you are not comfortable also sharing with the NSA.
8:55 p.m.
New subject: [trinity-users] [probably OT] How to add a scancode?
Hi
I tried it, but when there is no scancode, the event is not passed
further so there is no keycode. Xbindkeys works on keycodes which are
derived from scancodes (coming from keyboard driver?).
MCbx
"Dr. Nikolaus Klepp" <office(a)klepp.biz> napisał(a):
Hi!
I suggest you use "xbindkeys" for things like this, 'cause TDE hotkey
management is somewhat 'interesting'. For example, I cannot bind
<windows>+<up|down> to move to the next desktop. With xbindkeys it
works:
# ~/.xbindkeysrc
#WIN+UP
"dcop twin KWinInterface previousDesktop"
m:0x40 + c:111
Mod4 + Up
#WIN+DOWN
"dcop twin KWinInterface nextDesktop"
m:0x40 + c:116
Mod4 + Down
#MOUSE BUTTON8
"dcop twin KWinInterface nextDesktop"
b:8
Nik
Am Sonntag, 7. August 2016 schrieb iadest(a)o2.pl:
Hello
This is probably not related to TDE, but Linux in general (Debian
8?). I have a multimedia PS/2 keyboard "BTC 9001" (evtest reports
it as "AT Translated Set 2 keyboard") and I try to use all its
keys. Some are typical multimedia keys, while I program some other
to launch applications in my TDE using "Keyboard actions" panel.
Unfortunately not all keys are detected in OS by scancodes. Two
keys generate only a EV_MSC event, while not giving scancode.
Is it possible, by e.g. udev hwdb rule, to assign scancodes to these
events?
Here are results of evtest events test:
Testing ... (interrupt to exit)
Event: time 1470587826.798369, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1c
Event: time 1470587826.798369, type 1 (EV_KEY), code 28 (KEY_ENTER),
value 0
Event: time 1470587826.798369, -------------- EV_SYN ------------
Event: time 1470587829.689519, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.689519, type 1 (EV_KEY), code 30 (KEY_A),
value 1
Event: time 1470587829.689519, -------------- EV_SYN ------------
Event: time 1470587829.753248, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.753248, type 1 (EV_KEY), code 30 (KEY_A),
value 0
Event: time 1470587829.753248, -------------- EV_SYN ------------
Event: time 1470587836.420023, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.420023, type 1 (EV_KEY), code 217
(KEY_SEARCH), value 1
Event: time 1470587836.420023, -------------- EV_SYN ------------
Event: time 1470587836.504746, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.504746, type 1 (EV_KEY), code 217
(KEY_SEARCH), value 0
Event: time 1470587836.504746, -------------- EV_SYN ------------
Event: time 1470587839.705553, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.705553, -------------- EV_SYN ------------
Event: time 1470587839.782562, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.782562, -------------- EV_SYN
------------
Event: time 1470587840.546297, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.546297, -------------- EV_SYN ------------
Event: time 1470587840.648616, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.648616, -------------- EV_SYN ------------
Event: time 1470587842.578400, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1d
Event: time 1470587842.578400, type 1 (EV_KEY), code 29
(KEY_LEFTCTRL), value 1
Event: time 1470587842.578400, -------------- EV_SYN ------------
Event: time 1470587842.761042, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 2e
Event: time 1470587842.761042, type 1 (EV_KEY), code 46 (KEY_C),
value 1
Event: time 1470587842.761042, -------------- EV_SYN ------------
The keys pressed are: Return key released, A, then "Search"
custom key which works, then "Manual" and "Panel" keys (these two
don't work - no scancode), then ctrl-C to stop evtest.
MCbx
P.S. And again my webmail removed newlines in my previous post...
sorry for inconvenience, ignore the previous one.
---------------------------------------------------------------------
To unsubscribe, e-mail:
trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional
commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive:
http://trinity-users.pearsoncomputing.net/ Please remember not to
top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
9:10 p.m.
New subject: [trinity-users] [probably OT] How to add a scancode?
Hi!
If I remember correct, it's the keycode you need, not the scancode. Here's a
tutorial: https://wiki.archlinux.org/index.php/extra_keyboard_keys
Maybe you sould try "xev" (that's what I use, anyway).
Nik
Am Sonntag, 7. August 2016 schrieb iadest(a)o2.pl:
Hi
I tried it, but when there is no scancode, the event is not passed
further so there is no keycode. Xbindkeys works on keycodes which are
derived from scancodes (coming from keyboard driver?).
MCbx
"Dr. Nikolaus Klepp" <office(a)klepp.biz> napisał(a):
--
Please do not email me anything that you are not comfortable also sharing with the NSA.
Hi!
I suggest you use "xbindkeys" for things like this, 'cause TDE hotkey
management is somewhat 'interesting'. For example, I cannot bind
<windows>+<up|down> to move to the next desktop. With xbindkeys it
works:
# ~/.xbindkeysrc
#WIN+UP
"dcop twin KWinInterface previousDesktop"
m:0x40 + c:111
Mod4 + Up
#WIN+DOWN
"dcop twin KWinInterface nextDesktop"
m:0x40 + c:116
Mod4 + Down
#MOUSE BUTTON8
"dcop twin KWinInterface nextDesktop"
b:8
Nik
Am Sonntag, 7. August 2016 schrieb iadest(a)o2.pl:
---------------------------------------------------------------------
To unsubscribe, e-mail: trinity-users-unsubscribe(a)lists.pearsoncomputing.net
For additional commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive: http://trinity-users.pearsoncomputing.net/
Please remember not to top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
Hello
This is probably not related to TDE, but Linux in general (Debian
8?). I have a multimedia PS/2 keyboard "BTC 9001" (evtest reports
it as "AT Translated Set 2 keyboard") and I try to use all its
keys. Some are typical multimedia keys, while I program some other
to launch applications in my TDE using "Keyboard actions" panel.
Unfortunately not all keys are detected in OS by scancodes. Two
keys generate only a EV_MSC event, while not giving scancode.
Is it possible, by e.g. udev hwdb rule, to assign scancodes to these
events?
Here are results of evtest events test:
Testing ... (interrupt to exit)
Event: time 1470587826.798369, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1c
Event: time 1470587826.798369, type 1 (EV_KEY), code 28 (KEY_ENTER),
value 0
Event: time 1470587826.798369, -------------- EV_SYN ------------
Event: time 1470587829.689519, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.689519, type 1 (EV_KEY), code 30 (KEY_A),
value 1
Event: time 1470587829.689519, -------------- EV_SYN ------------
Event: time 1470587829.753248, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1e
Event: time 1470587829.753248, type 1 (EV_KEY), code 30 (KEY_A),
value 0
Event: time 1470587829.753248, -------------- EV_SYN ------------
Event: time 1470587836.420023, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.420023, type 1 (EV_KEY), code 217
(KEY_SEARCH), value 1
Event: time 1470587836.420023, -------------- EV_SYN ------------
Event: time 1470587836.504746, type 4 (EV_MSC), code 4 (MSC_SCAN),
value e5
Event: time 1470587836.504746, type 1 (EV_KEY), code 217
(KEY_SEARCH), value 0
Event: time 1470587836.504746, -------------- EV_SYN ------------
Event: time 1470587839.705553, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.705553, -------------- EV_SYN ------------
Event: time 1470587839.782562, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a6
Event: time 1470587839.782562, -------------- EV_SYN
------------
Event: time 1470587840.546297, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.546297, -------------- EV_SYN ------------
Event: time 1470587840.648616, type 4 (EV_MSC), code 4 (MSC_SCAN),
value a5
Event: time 1470587840.648616, -------------- EV_SYN ------------
Event: time 1470587842.578400, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 1d
Event: time 1470587842.578400, type 1 (EV_KEY), code 29
(KEY_LEFTCTRL), value 1
Event: time 1470587842.578400, -------------- EV_SYN ------------
Event: time 1470587842.761042, type 4 (EV_MSC), code 4 (MSC_SCAN),
value 2e
Event: time 1470587842.761042, type 1 (EV_KEY), code 46 (KEY_C),
value 1
Event: time 1470587842.761042, -------------- EV_SYN ------------
The keys pressed are: Return key released, A, then "Search"
custom key which works, then "Manual" and "Panel" keys (these two
don't work - no scancode), then ctrl-C to stop evtest.
MCbx
P.S. And again my webmail removed newlines in my previous post...
sorry for inconvenience, ignore the previous one.
---------------------------------------------------------------------
To unsubscribe, e-mail:
trinity-users-unsubscribe(a)lists.pearsoncomputing.net For additional
commands, e-mail: trinity-users-help(a)lists.pearsoncomputing.net
Read list messages on the web archive:
http://trinity-users.pearsoncomputing.net/ Please remember not to
top-post:
http://trinity.pearsoncomputing.net/mailing_lists/#top-posting
9:31 p.m.
New subject: [trinity-users] [probably OT] How to add a scancode?
Maybe you sould try "xev" (that's what I
use, anyway).
Xev doesn't detect if there's no scancode.
Problem fixed by using setkeycodes instead of udev hwdb rules. I used
setkeycodes method from the wiki:
https://wiki.archlinux.org/index.php/Map_scancodes_to_keycodes
mapping scancodes 0xA5 and 0xA6 to free keycodes, and it returns me a
keycode, so I can use any configuration tool, TDE panel works well
now.
The strange thing is that mapping the same scancodes to keycodes by
udev hwdb rules maps the keycodes... but not to the keys pressed, yet
to my "Previous song" and "Stop" multimedia keys!
No idea what's going on, sticking with setkeycodes.
MCbx
2827
days inactive
2827
days old
4 comments
2 participants
participants (2)
-
Dr. Nikolaus Klepp -
iadest＠o2.pl