On Sunday 23 August 2015 03:23:07 Gene Heskett wrote: 07:50 the next morning, showing about 5k/second, on file 116 of 278. About 7 hours left by its estimate. Cheers, Gene Heskett

On Sunday 23 of August 2015 13:53:19 Gene Heskett wrote: Publishing r14.0.1 to official mirrors is underway. And because the line to the primary server has a low bandwith, is again overloaded. Please give it some time and try again later.

Alternatively, you can temporarily switch to the preliminary stable builds repository, where are now also R14.0.1 - compiled from identical source packages as is on the official build farm.

On Sunday 23 August 2015 12:42:47 Lisi Reisz wrote: > On Sunday 23 August 2015 17:11:10 Slávek Banko wrote: > > Alternatively, you can temporarily switch to the preliminary stable > > builds repository, where are now also R14.0.1 - compiled from > > identical source packages as is on the official build farm. > > Strongly recommend this, but take out the word "temporarily". I would > have recommended it yesterday evening, but wasn't sure abouit > switching repositories half way through updating. > > To get Slávek's name (and other "strange" non-American names) use > kcharselect. > > Here is the entry you need. > > # Trinity preliminary stable builds > deb http://mirror.xcer.cz/trinity-sb wheezy deps-r14 main-r14

It will get there eventually Lisi. I am not just killing time until now. Something has happened to the motor driver module in my lathe and now the spindle motor is dead. The puzzlion thing is that there are leds on the port pins that do all this, and sometimes they indicate a normal signal headed down the cable, and sometimes they show zero activity. But my back has stood in front of that machine long enough now that it doesn't feel like wrestling the 400 lb toolbox its sitting on, around to gain access to the driver. Tomorrow maybe. I did get the lock pin hole bore at 2 diameter,s and about .2" of the outer end of the hole tapped at 50 tpi for an arbitrary thread diameter, meaning I will also need to make the threaded plug that retains it. But after I had mounted some 5/8" rod and centered it within a thousanth, intending to make that threaded plug, but now the spindle motor's driver is on strike. I swear at times if I didn't have bad luck, I wouldn't have any at all. Thats the 80 year old Iowa farm kid in me, making do with whats in the iron pile by the back fence. :) Cheers, Gene Heskett

On Sunday 23 August 2015 22:26:27 Gene Heskett wrote: Forgot to give you the key: # apt-key adv --keyserver keys.gnupg.net --recv-key A04BE668 Sources are available as well, but you don't need those to update. Lisi > > One line instead of the two (deps is included in the line): > > deb > > http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-r14.0.0 > >/deb ian wheezy main > > > > deb > > http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-buildde > >ps-r 14.0.0/debian wheezy main > > > > Then away you go. Fast _and_ reliable. > > > > Lisi > > > > ------------------------------------------------------------------ > >--- To unsubscribe, e-mail: > > trinity-users-unsubscribe(a)lists.pearsoncomputing.net For > > additional commands, e-mail: > > trinity-users-help(a)lists.pearsoncomputing.net Read list messages > > on the web archive: > > http://trinity-users.pearsoncomputing.net/ Please remember not to > > top-post: > > http://trinity.pearsoncomputing.net/mailing_lists/#top-posting > > It will get there eventually Lisi. I am not just killing time until > now. Something has happened to the motor driver module in my lathe > and now the spindle motor is dead. The puzzlion thing is that there > are leds on the port pins that do all this, and sometimes they > indicate a normal signal headed down the cable, and sometimes they > show zero activity. > > But my back has stood in front of that machine long enough now that > it doesn't feel like wrestling the 400 lb toolbox its sitting on, > around to gain access to the driver. Tomorrow maybe. I did get the > lock pin hole bore at 2 diameter,s and about .2" of the outer end of > the hole tapped at 50 tpi for an arbitrary thread diameter, meaning > I will also need to make the threaded plug that retains it. But > after I had mounted some 5/8" rod and centered it within a > thousanth, intending to make that threaded plug, but now the spindle > motor's driver is on strike. > > I swear at times if I didn't have bad luck, I wouldn't have any at > all. Thats the 80 year old Iowa farm kid in me, making do with whats > in the iron pile by the back fence. :) > > Cheers, Gene Heskett

We're currently trying to pull large ISOs from the primary server to the primary mirror for redistribution to the secondary mirrors.