12 Nov
2020
12 Nov
'20
5:04 p.m.
On Thursday 12 November 2020 11:10:11 BorgLabs - Kate
Draven wrote:
That's half of it Kate, the cups installed on the clients needs to
have "browser" enabled. Once that's done you can keep the chainsaws
busy. Until you run out of ink or toner.
Cheers, Gene Heskett
--
Well spotted.
I never run out of it. I have ALL the ink in the world!
Kate
On Thu,
12 Nov 2020 07:45:15 +0100
"Dr. Nikolaus Klepp" <office(a)klepp.biz> wrote:
We have been using the share printer function for years.
Go to localhost:631 and go to manage printers in admin.
It's buried somewhere, in there, an option to share the printer.
Kate You can print on any printer, but for zeroconf
aka "magicly see
the other printers on the net" you need "avahi" - which I ended up
removing fom any devices, 'cause it screws up routing tables when
you happen to be in the same as a silvery rotton tomato laptop.
Nik
In all the years I've used Linux, the only time I could access a
remote printer from another PC, was when the printer was wireless.
Seeing CUPS accessing a printer USB-connected to the other PC, that
was definitely a first for me. :)
____________________________________________________ 
13 Nov
13 Nov
2:04 a.m.
New subject: Possible bugs in Trinity Control Center - Printers and OS Installer
On Thursday 12 November 2020 12:04:05 BorgLabs - Kate Draven wrote:
No you don't, some of it is at Staples, 25 miles north in Bridgeport WV,
USA. I try to stay a pack ahead of my ink and 2 or 3 reams of paper
habit, but it does drop the card balance about $150 when I stock up. I
get prolific at times because every config file edit demands an uptodate
printout of a 10 to 20 double-sided page file, and one day recently 5
copies hit the trash can as obsolete, and I'm not quite done with the
latest addition to that machine. Got 3 or 4 days left of design and
machining to fit a motor on a hand driven accessory so I can write gcode
to set or change its angle on command. And I'm sidetracked ATM by
notbeing able to update a 150 thousand LOC file for a 3d printer. No
clue if its midnight commander lying to me, or cura claiming it has
updated the file but hasn't. Gonna find out right now. MSDOS file
systems leave much to be desired.
Take care and stay well Kate.
On Thursday 12
November 2020 11:10:11 BorgLabs - Kate Draven wrote:
That's half of it Kate, the cups installed on the clients needs to
have "browser" enabled. Once that's done you can keep the chainsaws
busy. Until you run out of ink or toner.
Cheers, Gene Heskett
--
Well spotted.
I never run out of it. I have ALL the ink in the world! On Thu,
12 Nov 2020 07:45:15 +0100
"Dr. Nikolaus Klepp" <office(a)klepp.biz> wrote:
> You can print on any printer, but for zeroconf aka "magicly
> see the other printers on the net" you need "avahi" - which I
> ended up removing fom any devices, 'cause it screws up routing
> tables when you happen to be in the same as a silvery rotton
> tomato laptop.
>
> Nik
In all the years I've used Linux, the only time I could access a
remote printer from another PC, was when the printer was
wireless.
Seeing CUPS accessing a printer USB-connected to the other PC,
that was definitely a first for me. :)
____________________________________________________
We have been using the share printer function for years.
Go to localhost:631 and go to manage printers in admin.
It's buried somewhere, in there, an option to share the printer.
Kate Kate
____________________________________________________
tde-users mailing list -- users(a)trinitydesktop.org
To unsubscribe send an email to users-leave(a)trinitydesktop.org
Web mail archive available at
https://mail.trinitydesktop.org/mailman3/hyperkitty/list/users@trinity
desktop.org
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>
1262
days inactive
1263
days old
1 comments
2 participants
participants (2)
-
BorgLabs - Kate Draven -
Gene Heskett