- tde-users - Trinity Desktop Environment

Behaviour setting on configure desktop
by Lisi Reisz 19 Nov '13

19 Nov '13

There is a problem (bug) with the settings for icons, in that I cannot set them. On my own computer they simply don't display, no matter how many settings I tick in the behaviour setting. I rarely use icons so this is a very minor problem. But I am setting up an installation for a client who relies on icons. He will be most upset to have the wrong ones. I go through ticking and unticking the boxes for the various hardware and files, click on "apply", and nothing changes, except that all the settings return to the default. The icons I want to get rid of remain and the ones that I want to show remain stubbornly invisible. Has anyone any suggestions for what I can do about this? Lisi

4 8

Help - Live Disk Problem
by David Bell 18 Nov '13

18 Nov '13

Greetings, Having installed TDE successfully on my desktop, using tde-3.5.13.2-ubuntu-12.04.2-desktop-amd64.iso, I have struck a problem with my laptop. Although I have previously installed many other GNU/Linux distros on it the live disk installs happily but won't install to the hdd. The disk was written on the laptop. When I select either the install icon or the item in the menu the CDROM comes to life then stops. A puzzlement! Is there is a command line I could use? Can anyone help me finally escape KDE4 using the live disk please? David W. Devon

1 0

Concerns about TDE R14 and 3.5.13.2 SRU
by Alexandre Couture 18 Nov '13

18 Nov '13

Hi everyone, I have a few concerns about TDE R14 and 3.5.13.2 SRU It seems to me that 3.5.13.2 SRU has next to perfect stability, features and reliability, while R14 is not there yet. By looking at this page: http://www.trinitydesktop.org/patches/ , almost all I can see is that the dev team is working very hard to just keep R14 in working conditions. Sometimes Amarok doesn't start, sometimes desktop or menus are unresponsive for a moment, some themes doesn't work completely and it is not like if the user would benefit from a new set of feature or a complete visual overhaul. I cannot see why an user would benefit from using the upcoming R14 when it is compared to the stability of 3.5.13.2 SRU. Everything works as it should in 3.5.13.2. It wolud have been a very good ground for improving TDE on top of it. All of this trouble is supposed to be for the integrations of QT4 parts in TDE, but it seems to me that in R14, it will be used nowhere, not even for a single check-box in a config panel. Maybe it is just me, maybe I would need some explanations. I mean that if the efforts has been made to make TDE more attractive to new users and to modernize it, it would certainly have more popularity. As well as making a new ''outside'' on top of an outdated car is not good, changing everything under the hood and keeping the old outdated ''outside'' is certainly not better at all. I know that TDE could be better, if some attention could be thrown at things that are not just under the hood. Just one man's opinion... Tell us what you think! -Alexandre

19 30

Re: [trinity-users] "Improving"/"Modernizing" the Look of TDE Considered Harmful
by William Morder 17 Nov '13

17 Nov '13

Anybody who wants TDE to look more "modern" (like Windoze, iPutz or whatnot), I say -- LET THEM EAT CAKE! The charm of the KDE3 desktop is its simplicity. Keep it simple, and let users configure it themselves. Bill

1 0

Re: confirm unsubscribe from trinity-users@lists.pearsoncomputing.net
by Burlen Loring 14 Nov '13

14 Nov '13

On 11/14/2013 10:21 AM, trinity-users-help(a)lists.pearsoncomputing.net wrote: > Hi! This is the ezmlm program. I'm managing the > trinity-users(a)lists.pearsoncomputing.net mailing list. > > I'm working for my owner, who can be reached > at trinity-users-owner(a)lists.pearsoncomputing.net. > > > I haven't checked whether your address is currently on the mailing list. > To see what address you used to subscribe, look at the messages you are > receiving from the mailing list. Each message has your address hidden > inside its return path; for example, mary(a)example.com receives > messages with return path: > <trinity-users-return-<number>-mary=example.com(a)lists.pearsoncomputing.net. > > Some mail programs are broken and cannot handle long addresses. If you > cannot reply to this request, instead send a message to > <trinity-users-request(a)lists.pearsoncomputing.net> and put the entire address listed above > into the "Subject:" line. > > or for the digest to: > <trinity-users-digest-unsubscribe(a)lists.pearsoncomputing.net> > > For addition or removal of addresses, I'll send a confirmation > message to that address. When you receive it, simply reply to it > to complete the transaction. > > If you need to get in touch with the human owner of this list, > please send a message to: > > <trinity-users-owner(a)lists.pearsoncomputing.net> > > Please include a FORWARDED list message with ALL HEADERS intact > to make it easier to help you. > > --- Enclosed is a copy of the request I received. > > Return-Path: <bloring(a)lbl.gov> > Received: (qmail 4838 invoked by uid 64014); 14 Nov 2013 12:21:19 -0600 > Received: from localhost (localhost.localdomain [127.0.0.1]) > by mail.pearsoncomputing.net (Postfix) with ESMTP id 96ABC45601F3 > for <trinity-users-unsubscribe-bloring=lbl.gov(a)lists.pearsoncomputing.net>; Thu, 14 Nov 2013 12:21:19 -0600 (CST) > X-Virus-Scanned: amavisd-new at pearsoncomputing.net > X-Spam-Flag: NO > X-Spam-Score: -0.091 > X-Spam-Level: > X-Spam-Status: No, score=-0.091 tagged_above=-10 required=6.6 > tests=[BAYES_00=-1.9, EMPTY_MESSAGE=2.32, MISSING_SUBJECT=1.799, > RCVD_IN_DNSWL_MED=-2.3, T_RP_MATCHES_RCVD=-0.01] autolearn=no > Received: from mail.pearsoncomputing.net ([127.0.0.1]) > by localhost (vali.starlink.edu [127.0.0.1]) (amavisd-new, port 10024) > with ESMTP id TC85ERtSDQUX > for <trinity-users-unsubscribe-bloring=lbl.gov(a)lists.pearsoncomputing.net>; > Thu, 14 Nov 2013 12:21:13 -0600 (CST) > Received: from fe2.lbl.gov (fe2.lbl.gov [128.3.41.134]) > by mail.pearsoncomputing.net (Postfix) with ESMTP id 95FC745601C9 > for <trinity-users-unsubscribe-bloring=lbl.gov(a)lists.pearsoncomputing.net>; Thu, 14 Nov 2013 12:21:13 -0600 (CST) > X-Ironport-SBRS: 4.8 > X-IronPort-Anti-Spam-Filtered: true > X-IronPort-Anti-Spam-Result: ApUKAHUThVLRVcC2lGdsb2JhbABag3SFSbMqhmt6Fg4BAQEBBwsLCRIqgmQVKz0WGAMCAQIBIgEFAQIOBgICFQgBAYd9BZ55gwSRJY0rj3yEGwOJQp5uQYR0 > X-IronPort-AV: E=Sophos;i="4.93,700,1378882800"; > d="scan'208";a="34940089" > Received: from mail-pd0-f182.google.com ([209.85.192.182]) > by fe2.lbl.gov with ESMTP; 14 Nov 2013 10:21:13 -0800 > Received: by mail-pd0-f182.google.com with SMTP id y13so2345500pdi.27 > for <trinity-users-unsubscribe-bloring=lbl.gov(a)lists.pearsoncomputing.net>; Thu, 14 Nov 2013 10:21:12 -0800 (PST) > X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; > d=1e100.net; s=20130820; > h=x-gm-message-state:message-id:date:from:user-agent:mime-version:to > :content-type:content-transfer-encoding; > bh=47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=; > b=aCThfeSBkvkYAjEH/315854jZtRhcxrlRcitW2dvTzCc4giN4SYxaC/y/KMF9IWa0s > 6bZfsjKzdRQZ59RKcWQio3YAfqKc9uF3nYRh7bUasKMxgwR7BsJavbU0fHrPi0beKNAe > 7Euo4wBBxNaiT3HmIoxXshN35SHDYcsWvQAIT5c00g3hxwWTFPrR26WTFOpyyqzpIxhF > HsDeezfsFuqp6Nunes7/QxMmxDDRiSrEdkDpaGXHS34WRC99UhVDk2RuvbgSqZngAX+I > jhy5yM1/179PtmXZ5+PDCCSvpcbp4gC0pbySDzLBUfkU97896g9Z5R1RGR5BLePyGqMJ > aCkw== > X-Gm-Message-State: ALoCoQmgA8j1oliZnInnUOwLecKyH0k2wVX4BVwkLasypOf4TcPUtGNbyw8yIJSs/KleOnRcqXpNvGUZYVJMzSc16vLg3IxPThMt3xtWfwthFYkAKxxnxTr/0n3Uc4ZGMcbolP3vfbCcOztwEDaIOKspvdroVWJmsL0zDBVR+TGzaNQK2+QGq4MVRU6HlGUhYmdHILn5TPN03+g2RadY84chA44EEGsxLuz3TYcVyEfz6pFnmhTYQHaRet/g66DQU17UNLoySzuxlJhlKLT0XzpfHw/lpxn/tA== > X-Received: by 10.66.231.6 with SMTP id tc6mr2767919pac.68.1384453272857; > Thu, 14 Nov 2013 10:21:12 -0800 (PST) > X-Received: by 10.66.231.6 with SMTP id tc6mr2767890pac.68.1384453272454; > Thu, 14 Nov 2013 10:21:12 -0800 (PST) > Received: from rocky.dhcp (rocky.dhcp.lbl.gov. [131.243.240.205]) > by mx.google.com with ESMTPSA id uf2sm8373516pbc.28.2013.11.14.10.21.11 > for <trinity-users-unsubscribe-bloring=lbl.gov(a)lists.pearsoncomputing.net> > (version=TLSv1 cipher=RC4-SHA bits=128/128); > Thu, 14 Nov 2013 10:21:11 -0800 (PST) > Message-ID: <52851496.9030700(a)lbl.gov> > Date: Thu, 14 Nov 2013 10:21:10 -0800 > From: Burlen Loring <bloring(a)lbl.gov> > User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.0 > MIME-Version: 1.0 > To: trinity-users-unsubscribe-bloring=lbl.gov(a)lists.pearsoncomputing.net > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > Content-Transfer-Encoding: 7bit > >

1 0

Re: [trinity-users] Errors while compiling tdebase
by Vince Reher 14 Nov '13

14 Nov '13

On Tuesday 12 November 2013, Timothy Pearson wrote: > > I have been trying to compile Trinity from source on a relatively current > > Gentoo system and am running into the following errors: > > > > In file included from > > /offline/1-1/TDE/main/tdebase/kcontrol/tdm/main.cpp:342:0: > > /offline/1-1/TDE/BUILD/tdebase-3.5.13/kcontrol/background/main.moc: > > In member function âvirtual void* KBackground::tqt_cast(const char*)â: > > /offline/1-1/TDE/BUILD/tdebase-3.5.13/kcontrol/background/main.moc:81:41: > > error: cannot call member function âvirtual void* > > TDECModule::qt_cast(const char*)â without object > > > > and similar errors for tqt_invoke, tqt_emit, and tqt_property. > > > > I tried GCC versions 4.7.3, 4.6.3, 4.5.3 and experience the same error. > > It also occurs regardless of whether I am compiling with current git > > sources or the Trinity release 3.5.13.2 tarballs I found at > > http://depot-trinity.dotriver.eu/releases/3.5.13.2. > > > > Anybody else experience this? I tried playing around with the source code > > (not really knowing what I am doing) to get beyond the error but that just > > got me linker errors instead. Building TDE had been going pretty smoothly > > until this. > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: > > trinity-users-unsubscribe(a)lists.pearsoncomputing.net > > For additional commands, e-mail: > > trinity-users-help(a)lists.pearsoncomputing.net > > Read list messages on the web archive: > > http://trinity-users.pearsoncomputing.net/ > > Please remember not to top-post: > > http://trinity.pearsoncomputing.net/mailing_lists/#top-posting > > Do you have any version of Qt3 and/or TQt3 other than TQt3 from GIT > installed on your system? > > Tim > > Tim, I am sure that there was no vestige of a former Qt3 and/or TQt3, at least on some of the systems I tried building in, but your question suggested further investigations about whether I had a truly 'clean room' build environment. I edited the cmake & autoconf shell scripts I was using to build in order to remove influential environment variables and configuration options that were not explicitly called for in your build instructions. After doing so, I was able to get past the compiler error, at least for stock 3.5.13.2. I'll try again tomorrow with the current git sources. Although there was nothing obviously wrong with my original scripts (designed on the fly to fix build problems from several years ago), I now believe that these somehow bypassed the tqtinterface to tqt3. The main suspects are the setting of the C*_INCLUDE_PATH environment variables and / or passing an improper explicit -DMOC_EXECUTABLE parameter to the cmake configure script. Thanks for your suggestion, I'm back in operation. Vince

1 0

Errors while compiling tdebase
by Vince Reher 13 Nov '13

13 Nov '13

I have been trying to compile Trinity from source on a relatively current Gentoo system and am running into the following errors: In file included from /offline/1-1/TDE/main/tdebase/kcontrol/tdm/main.cpp:342:0: /offline/1-1/TDE/BUILD/tdebase-3.5.13/kcontrol/background/main.moc: In member function ‘virtual void* KBackground::tqt_cast(const char*)’: /offline/1-1/TDE/BUILD/tdebase-3.5.13/kcontrol/background/main.moc:81:41: error: cannot call member function ‘virtual void* TDECModule::qt_cast(const char*)’ without object and similar errors for tqt_invoke, tqt_emit, and tqt_property. I tried GCC versions 4.7.3, 4.6.3, 4.5.3 and experience the same error. It also occurs regardless of whether I am compiling with current git sources or the Trinity release 3.5.13.2 tarballs I found at http://depot-trinity.dotriver.eu/releases/3.5.13.2. Anybody else experience this? I tried playing around with the source code (not really knowing what I am doing) to get beyond the error but that just got me linker errors instead. Building TDE had been going pretty smoothly until this.

2 1

Nikon D60 does not show up
by Paul Cartwright 10 Nov '13

10 Nov '13

I had to logout & log back is using XFCE to get my camera recognized. Trinity showed an unknown device & I could not get to the pictures folder on it. Once I logged in using XFCE I was able to get to the pictures.. here is the syslog entry, but I can't tell if this is trinity or XFCE.. Nov 9 20:59:33 pauls-server kernel: [286010.305503] usb 1-4.4: new high-speed U SB device number 15 using ehci-pci Nov 9 20:59:33 pauls-server kernel: [286010.398497] usb 1-4.4: New USB device f ound, idVendor=04b0, idProduct=041e Nov 9 20:59:33 pauls-server kernel: [286010.398509] usb 1-4.4: New USB device s trings: Mfr=1, Product=2, SerialNumber=3 Nov 9 20:59:33 pauls-server kernel: [286010.398517] usb 1-4.4: Product: NIKON D SC D60 Nov 9 20:59:33 pauls-server kernel: [286010.398523] usb 1-4.4: Manufacturer: NI KON Nov 9 20:59:33 pauls-server kernel: [286010.398528] usb 1-4.4: SerialNumber: 31 46555 Nov 9 20:59:33 pauls-server mtp-probe: checking bus 1, device 15: "/sys/devices /pci0000:00/0000:00:12.2/usb1/1-4/1-4.4" Nov 9 20:59:33 pauls-server mtp-probe: bus: 1, device: 15 was not an MTP device Nov 9 20:59:33 pauls-server colord: Device added: sysfs-NIKON-NIKON_DSC_D60 Nov 9 21:03:31 pauls-server kernel: [286248.278620] usb 1-4.4: USB disconnect, device number 15 -- Paul Cartwright Registered Linux User #367800 and new counter #561587

1 0

CTRL-ALT-DEL doesn't work
by Paul Cartwright 06 Nov '13

06 Nov '13

after installing trinity, I finally rebooted for something. When I restarted Mint, it came up to a trinity desktop window that said to use CTRL-ALT-DEL to login. but CTRL-ALT-DEL did nothing.. I had to restart in safe mode, run dpkg-reconfigure tdm-trinity and change it back to MDM. what do I need to do to be able to login with tdm-trinity??? -- Paul Cartwright Registered Linux User #367800 and new counter #561587

3 3

ubuntu 13.10+trinity
by Dave 05 Nov '13

05 Nov '13

Do we have a setup for UBUNTU 13.10 (Saucy Salamander) yet?

4 11

Re: Release date for R14?
by Jan Stolarek 04 Nov '13

04 Nov '13

Hi guys, Any update on the relelase date for R14? Janek

1 0

Good distro for 586 computer
by Alexandre Couture 28 Oct '13

28 Oct '13

Hi everyone! I might not write it at the right place, but here is my question: I bought on EBay a Compaq TC1000 convertible tablet pc at a low price. It has a Transmeta Crusoe TM5800 1ghz CPU and I installed +-360mb of ram on it. The trouble is that this CPU emulates a 586 cpu only... ...and most modern distros are 686 and up... I tried Mageia and even if it is supposed to be 586, it causes kernel panic. I also tried Debian 7.2 and it works at least partly, but as in the Debian way of doing things, it asks me to go online to fetch the driver I'd need to go online... Grrr! Does someone here know of a good distro to use (or that actually boots) on a 586 CPU? Thank you in advance! -Alexandre

3 3

You have a folder ~/.trinity/share/apps/kwinrulesrc?
by Slávek Banko 23 Oct '13

23 Oct '13

Hello Darrell, everybody, I noticed that skrit r14-xdg-update solved renaming kwinrulesrc in ~/.trinity/share/apps instead of ~/.trinity/share/config (I've had it on my computers). In commit 37e840ac I tried to fix it. However, as I subsequently noticed script expecting in the 'apps' folder 'kwinrulesrc' but on my system I have in the 'config' file 'kwinrules'. Please, have anyone kwinrules as a folder in ~/.trinity/share/apps or only exists a file in ~/.trinity/share/config? Thanks, Slavek

4 5

Re: [trinity-users] You have a folder ~/.trinity/share/apps/kwinrulesrc?
by Thierry de Coulon 19 Oct '13

19 Oct '13

On Saturday 19 October 2013 13.08:31 Andy wrote: > I have kwinrulesrc and kwinrules_update in ~/.trinity/share/config only. > > Best regards, > Andy Same here. Thierry

2 1

konqueror settings disapear
by Frank Lienhard 15 Oct '13

15 Oct '13

Hi List, I installed kde-trinity and was about to configure konquerors file settings. The goal was to show previews of the picture of an inserted sdcard. Somewhere I tried to switch the file assosiation tothe embedded viewer. From that point on I don't get the settings menu anymore. If I open it via settings- configure konqueror I get a window with no content and a title "empty page". Any advice how to debug that? It's a debian wheezy, from which I try to run konqueror inside a LXDE session, many because TDE isn't starting at all... (getting a logout while/after TDE ist initializing peripherials)

3 12

Compiz Fusion
by Rahul Jain 15 Oct '13

15 Oct '13

Hello. compiz-fusion-icon package in raring (Ubuntu) is broken and doesn't install. However compiz fusion starts up fine through the Desktop Effects dialog and I get wobbly windows and everything. Everything works except that I can't resize windows, nothing happens when I try. I can't tell how to configure compiz fusion. I appreciate any advice. Thanks.

1 0

Linux Mint won't shutdown after installing Trinity
by Rahul Jain 13 Oct '13

13 Oct '13

Hello. I'm a regular user and after installing Trinity with Raring packages in Mint 15, system won't shutdown/restart but hangs at plymouth. Is there a workaround for this because I have to use REISUO to shutdown and REI part doesn't work because for some reason it's disabled. Please help. (I've installed and reinstalled several times and issue occurs only with trinity desktop. I usually install only kdebase-trinity with kmix-trinity and compiz-trinity packages. Thanks.

3 2

Set relative path in .directory?
by Thierry de Coulon 07 Oct '13

07 Oct '13

I've been archiving files this week-end. I use external drives, IcyDock removable enclosures and several removable discs. Given the price of harddiscs today, I don't loose time compressing, I copy the files into directories, and for some (e.g. pictures) I like to set a directory icon in Konqueror. There are several USB devices connected to my computer, and depending on the situation the enclosure is not mounted on the same mountring point. Maybe I could solve that with UUIDs but it's not worth the trouble. My point is that setting an icon in Konqueror creates a .directory textfile in the directory that contains two lines: [Desktop Entry] Icon=<path-to-the-icon-file> This path is an absolute path, such as /extusb/directoryname/subdirectoryname/iconname If the mount point changes, the icon is not shown. One way to do is to centralize these icons, but then it won't work if I use the enclosure with another computer. To have my directory icons shown correctly, what I do is put the icon in the directory and manually edit .directory to read [Desktop Entry] Icon=./icon.png I was wondering if others have the same "trouble" and if it would make sense to suggest to change these path to relative ones. Have a nice day, Thierry

1 0

KIOExec error playing DVD
by Dan Youngquist 02 Oct '13

02 Oct '13

I'm trying to make a DVD play in vlc when inserted. The command line is set to 'vlc /dev/dvd', which works perfectly in XFCE, but in trinity it results in an error box with title 'Error - KIOExec' and contents '/media/cdrom0 is a folder, but a file was expected.' Clearly I'm missing something, but I have no idea what. Any hints? Thanks. -- PGP key: http://homestead-products.com/pubkey.htm

4 15

save system clock to hardware clock
by Paul Cartwright 23 Sep '13

23 Sep '13

I am not at all sure this is a Trinity issue, it could very well be Ubuntu problem. I was working on the logout issue, since I was running lightdm instead of kdm-trinity. NOW when I tell it to reboot, it hangs going down and the last message on the screen is: save system clock to hardware clock. a CTRL-ALT-DEL just cycles the last 4 items and it goes right back to sitting at that error message. So then I just have to hard power down using the SWITCH. any suggestions?? -- Paul Cartwright Registered Linux User #367800 and new counter #561587

4 3

Re: [trinity-users] shutdown?
by Thierry de Coulon 23 Sep '13

23 Sep '13

On Monday 23 September 2013 14.03:56 Paul Cartwright wrote: > On 09/23/2013 02:52 AM, Thierry de Coulon wrote: > >> when I click logout, I get a window with Logout and Cancel. Those are my > >> > >> > 2 choices. > >> > if I clock logout, it.. logs me out. If I click cancel, I go back to > >> > my trinity login session. > > > > Are you sure you are not using some other window manager (xdm, gdm)? > > > > Thierry > > yes, so I finally got kdm-trinity working and I was able to login. At > first it wouldn't let me CTRL-ALT-DEL and login so I had to modify > /etc/trinity/kdm/kdmrc and uncomment SelectedUsers=my_login > > now the logout has 3 options, logout, shutdown & restart:) > thanks! Happy I could help. Actually was "Display Manager" and not "Window Manager", typo. Have a nice day, Thierry

2 1

shutdown?
by Paul Cartwright 23 Sep '13

23 Sep '13

When I go to logoff the menu selection only says logoff. Not shutdown or restart. How do you add those to the logoff menu?? -- Paul Cartwright Registered Linux User #367800 and new counter #561587

5 11

toggle showing desktop stumbles
by Philip Ashmore 23 Sep '13

23 Sep '13

Hi there. I've got <ctrl><alt>D set up as an alternate for "toggle showing desktop". I have the wallpaper set up in slide-show mode - lots of pictures. So when one comes along I like (kicker is translucent), I <ctrl><alt>D to see it. I tried holding down <ctrl><alt>D to see how quickly the desktop redraws and it flickered a few times before all the apps disappeared, after which pressing the key-combo had no effect - the desktop background was permanent. I could click on the apps in kicker to bring them back individually. Is this a bug? Regards, Philip Ashmore

1 0

Anyone know what program shows this battery icon in the status bar?
by Philip Ashmore 22 Sep '13

22 Sep '13

Hi there. I took a snapshot of the one I mean (attached). I think it belongs to a battery status monitor for another desktop and I'd really like to get rid of it as it's right next to the Trinity one. Thanks in advance, Philip Ashmore

2 2

Task switching randomness
by Philip Ashmore 22 Sep '13

22 Sep '13

Hi there. Every once in a while, my task switching routine (edit in Kate, compile in Konsole, debug in another Konsole session over ssh) gets disrupted when some random window I have in the background gains focus when I alt-tab. I guess it's meant to remind me that I have other windows open, but I'd rather it didn't do that. Is there a way to turn it off? Thanks in advance, Philip Ashmore

1 0

slow down
by Paul Cartwright 21 Sep '13

21 Sep '13

so I was using email and clicked on a link last night. the chrome window came up, I started to move my mouse to the window, and the mouse froze.. for about 10 seconds, I moved it and it froze again. After a few rounds of this I went to a terminal window to see what is going on. I did my usual"sudo su" and typed in my password.. came back invalid.. after 3 times doing this ( usuing the same password I just logged in with) it locked me out. So I logged out, logged in with XFCE4, ran another terminal, and was successful doing the same sudo su command. Today I am logged back in with no problems SO far.. looking at syslog I see... about that time: Sep 19 20:32:56 pauls-server kernel: [43919.230270] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.243176] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.257043] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.271533] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.285273] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.299263] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.313130] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.327245] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 Sep 19 20:32:56 pauls-server kernel: [43919.341235] logitech-djreceiver 0003:046 D:C52B.00ED: can't reset device, 0000:00:12.2-4.1/input2, status -71 then this: Sep 19 20:33:07 pauls-server mtp-probe: checking bus 1, device 58: "/sys/devices /pci0000:00/0000:00:12.2/usb1/1-4/1-4.1" Sep 19 20:33:07 pauls-server mtp-probe: bus: 1, device: 58 was not an MTP device Sep 19 20:33:11 pauls-server kernel: [43934.494398] hub 1-4:1.0: port 1 disabled by hub (EMI?), re-enabling... then more Sep 19 20:33:23 pauls-server mtp-probe: bus: 1, device: 60 was not an MTP device Sep 19 20:33:38 pauls-server kernel: [43961.355985] hub 1-4:1.0: port 1 disabled by hub (EMI?), re-enabling... Sep 19 20:33:38 pauls-server kernel: [43961.356351] usb 1-4.1: USB disconnect, d evice number 60 Sep 19 20:33:43 pauls-server kernel: [43966.244265] logitech-djreceiver 0003:046 D:C52B.0106: can't reset device, 0000:00:12.2-4.1/input2, status -110 Sep 19 20:33:43 pauls-server kernel: [43966.478324] usb 1-4.1: new full-speed US B device number 61 using ehci-pci it seems to be doing the same thing over & over.. Sep 19 20:34:07 pauls-server kernel: [43990.008344] hub 1-4:1.0: port 1 disabled by hub (EMI?), re-enabling... Sep 19 20:34:07 pauls-server kernel: [43990.008708] usb 1-4.1: USB disconnect, d evice number 64 Sep 19 20:34:11 pauls-server kernel: [43994.752472] logitech-djreceiver 0003:046 D:C52B.011A: can't reset device, 0000:00:12.2-4.1/input2, status -110 Sep 19 20:34:12 pauls-server kernel: [43994.978539] usb 1-4.1: new full-speed US B device number 65 using ehci-pci and it goes on & on for a few minutes doing this can't reset.... what happened??? -- Paul Cartwright Registered Linux User #367800 and new counter #561587

4 3

.cache/dconf/user ??
by Paul Cartwright 19 Sep '13

19 Sep '13

1 0

SAK: cannot login after s2ram
by Nicolas Bercher 18 Sep '13

18 Sep '13

I recently upgraded to 3.5.13.2 and discovered the SAK. Since then I *sometimes* have big issues after waking up from s2ram on my laptop: the alt+ctrl+del does not work at all and I cannot login to my session anymore. The problem looks like random. Any clue for that? (I spent one hour searching the list with no success) Nicolas

2 2

Trinity Desktop on Debian Jennie/Testing
by Stephen P. Molnar 10 Sep '13

10 Sep '13

Has anyone successfully installed the Trinity Desktop in Debian Testing? I managed to follow the wiki directions for Debian 7.1.0 without any glitches, however there are no /etc/apt/sources.list entries for Jessie. Any suggestions will be much appreciated. Thanks in advance.

3 2

Desktop managers
by Mike Howard 10 Sep '13

10 Sep '13

Hi All, I assume that any desktop manager, such as GDM for example, can be used with TDE, instead of trinity-kdm? The reason I ask is I'm having problems getting xming working from a Win7 pc (just getting blank, black screen) and I always found gdm more user friendly. Cheers, Mike. --

1 1

openSUSE Installation Steps
by Cameron Rapp 08 Sep '13

08 Sep '13

Hi, I Installed Trinity using the instructions at http://www.trinitydesktop.org/wiki/bin/view/Documentation/OpenSUSEBinaryIns… but it does not work out of the box this way. I'm hoping someone with write privileges can add these steps to the wiki In /etc/profile: Change the lines pointing to /opt/kde3 to /opt/trinity so the binaries will be in the PATH In /etc/sysconfig/displaymanager: Change DISPLAYMANAGER to say DISPLAYMANAGER=/opt/trinity/bin/kdm using just kdm doesn't work, even with PATH set correctly. Also, openSUSE 11.4 repository is broken, there were some dependency issues with the trinity-desktop package. I'll look into that again later. Thank you!

3 5

ktorrent
by Dave 06 Sep '13

06 Sep '13

this comes up on any automake builds. Too new. root [ /sources/kde/ktorrent-trinity-3.5.13.2/build ]# make -f ../admin/Makefile.common *** YOU'RE USING automake (GNU automake) 1.14. *** TDE requires automake 1.6.1 or newer make: *** [cvs] Error 1 root [ /sources/kde/ktorrent-trinity-3.5.13.2/build ]#

1 0

kscreensaver
by Dave 06 Sep '13

06 Sep '13

The preview window for the selected saver has the proper width, but 2 or 3 pixels in height. Savers do work.

2 2

TDE for Debian Jessie, testing
by Lisi Reisz 03 Sep '13

03 Sep '13

After a plug on the Debian mailing list I got the following reply (which many of you may already have seen): <quote> Alas, Trinity's Debian repo does not appear to work for Jessie. </quote> I'm sure that some of you must be running Jessie - or are we all waiting for 14 to bed in on Wheezy, Stable, first? Lisi

1 0

alt+ctrl+del ? seriously?
by Frank Lienhard 02 Sep '13

02 Sep '13

Hi List, the newly installed Trinity shwes me a alt+ctrl+del before the login. Really? a windows-alike? Please: 1) How to deactivate (kinda silly on a single notebook) 2) use! another! key! combination! mclien

6 12

Installing apps
by cwm030＠aol.com 02 Sep '13

02 Sep '13

Ok its been awhile since Ive used KDE 3.. how do we install apps? I installed MUON but it tried to download like KDE 4 it looked like it installed alot of KDE 4 resources. I have synaptic installed now.. Not profecient with it I am use to a graphical interface but learning. also how do we update the OS? I tried typing in ADEPT not found.. I looked though the menus in classic mode and I dont see an updater??? I installed TDE though a CD instead of a sudo apt-get method. ~ Christopher ~

2 1

restricted extras?
by cwm030＠aol.com 02 Sep '13

02 Sep '13

I cannot figure out how to install flash... I tried sudo apt-get install kubuntu-restricted-extras it says E: doesnt exist. I went to adobe.com and firefox goes to a page cant be displayed because there is no APT installed. Thanks, ~ Christopher ~

3 4

HIBERNATE = SHUTDOWN
by cwm030＠aol.com 01 Sep '13

01 Sep '13

here is something odd... before bed last night I put the pc in Hiber. got up this morning and turned the pc on and it shut down.. it didnt hiber. because when it came up and asked what OS do I want to load... TDE or TDE recovery etc.... I got back in and opened KONSOLE and put in UPTIME it said 1 min? Ideas? ~ Christopher ~

1 0

konqueror, change view from icon in file view
by Frank Lienhard 01 Sep '13

01 Sep '13

since I first use Trinity, I have this problem that when using konqueror: The button/icon for change the file view (icons, small icons, list, detailed list etc.) not working. The little arrow is somhow "merged" into the icon and doesn't opens the drop down menu, which gives the selection of the views. Selecting the views from the menue bar "view" workes..

2 1

Desktop icons: all home content by accident
by Frank Lienhard 01 Sep '13

01 Sep '13

Hi List, I don't know how, but my mother managed to get her Desktop populated withe the content of her home dir. (Means there are icons of EVERYTHING that's in the home dir are on the desktop). How do I get rid of that? I tried everything I could imagine inside the ~/Desktop dir, which hasn't any effect at all. So what to do now??

2 3

networkmanager
by Frank Lienhard 01 Sep '13

01 Sep '13

I tested a machine with debian-live-lxde. So the network-manager worked out of the box, I installed debian basic and then installed trinity and (among others) network-manager. But how do I use it with trinrity? all hints from the list didn't helped.

1 0

kpowermanager problem
by Mag. Dr. Nikolaus Klepp 01 Sep '13

01 Sep '13

Hi all! I just ran into an interesting problem with kpowermanger (fresh installed wheezy + TDE 3.5.13.2): when I have my testuser configured to "autologin" and has "kpowermanager" aktivated, then - on the first autologin, kpowermanager does not work, i.e. it shows a dithered plug symbol. - testuser logs out and automaticaly logs in again: "kpowermanager" works as intended. Is there an easy workaround instead of logging out the first time? Could somebody with a deeper insight in TDE internals guide me to debug the problem? nik -- Mag. Dr. Nikolaus Klepp Einnehmerstraße 14 A-4810 Gmunden Tel.: +43 650 82 11 724 email: office(a)klepp.biz

2 3

Wavy scrolling in apps like Firefox
by Rahul Jain 31 Aug '13

31 Aug '13

Hello. I'm using current stable version of Trinity on Linux Mint 15. I have the Trinity composite manager enabled and the desktop doesn't flicker or anything on refreshing anymore. But though composite is enabled, I'm still getting wavy scrolling in Firefox. Firefox in Cinnamon environment works fine though. Is there a way to get rid of the wavy scrolling? Thanks.

3 3

kdebindings 3.5.13.2
by Dave 31 Aug '13

31 Aug '13

I'm building from scratch. I've made through most of the packages.... How do I handle the kdebindings package. cmake complains about missing CMakeLists.txt. Dave

2 1

TDE <-> Gnome conflict
by Frank Lienhard 30 Aug '13

30 Aug '13

Hi There, I just did a fresh install of wheezy inkl. Gnome (by choosing "desktop env., which by default is Gnome in wheezy/debian). I then tried to install TDE, which ends in this conflict: "The following packages have unmet dependencies: desktop-base-trinity : Conflicts: desktop-base but 7.0.3 is installed. kdeprint-trinity : Conflicts: foomatic-db-compressed-ppds but 20120523-1 is installed. The following actions will resolve these dependencies: Remove the following packages: 1) desktop-base 2) foomatic-db-compressed-ppds Leave the following dependencies unresolved: 3) foomatic-db-engine recommends foomatic-db-compressed-ppds | foomatic-db 4) gdm3 recommends desktop-base (>= 6) 5) printer-driver-min12xxw recommends foomatic-db" Isn't TDE ment to live in co-existance with other DEs (like most aof the other do to?) Greets Frank

2 2

Bug?? in TDE 3.13.2 on Wheezy
by Lisi Reisz 29 Aug '13

29 Aug '13

Hello, everyone :-) I think I may have hit a bug. It seems unlikely since it is a very conspicuous one, but perhaps I'm the only one using the desktop in exactly my way. It has two manifestations, one the exact opposite of the other. The two machines in question are: one running TDE 3.5.2 on Wheezy, recently upgraded from Squeeze; the other a fresh installation of both TDE 3.5.2 and Wheezy. Now, what happens: Configure desktop -> Behaviour -> General -> Show icons on desktop: checked. Configure desktop -> Behaviour -> Device Icons -> Show device icons: checked. If I uncheck the boxes, then click apply, the display briefly disappears, the status quo ante is not changed, and the checks both reappear. Now, where the two computers differ. On the one that has recently been upgraded there are no desktop icons whatever I do, and on the fresh install I cannot get rid of the icons. Help!! Can anyone solve it? Or should I file a bug? Lisi

3 7

A second bug? - in KMail this time
by Lisi Reisz 29 Aug '13

29 Aug '13

On one of the computers only, Nyx (the one with a fresh install and permanent icons), the font in the message body in the message window of KMail refuses to be altered. The Fancy Header is fine. It responds to changes immediately. But the message itself simply refuses to be formatted. All the other things I wanted to alter were fine: message list, folder list etc. I can change font, size of font and colour of font. This is awkward as my husband has cataracts and the default font is not all that clear and very small. Tux-II, the upgraded computer, is fine. I can format anything I want. Lisi

1 0

Problems with posting to list
by Lisi Reisz 29 Aug '13

29 Aug '13

My recent emails to the list have been taking a seriously long time to get there. Am I doing something wrong? To give you an idea (and hopefully prod Murphy) the email I sent just now was sent at 9:09 UTC, and this one at 9:21 UTC, both on 13-08-29. Lisi

1 0

Alexandre's most recent PCLOS remaster
by Lisi Reisz 25 Aug '13

25 Aug '13

I have been having a play with Alexandre's latest release of his remaster. I have been one of Alexandre's fiercest critics, if not the fiercest. So I feel that I must give credit where credit is due. Alexandre, I love it. I particularly liked those beautiful colours that one can gaze at as the system boots up. I greatly appreciated the chance to stick with a classic menu. I even quite liked the desktop - and it was obviously amenable to change, which I also liked. The selection of icons both on the desktop and on the panel was great. I prefer to work without icons generally, but these I could live with. There was even an icon for KWrite. I almost felt that I had come home. Kudos. You have worked hard, and listened, and produced something lovely. I had a very unfortunate experience with PCLOS and its being a rolling distro. A pity, as there was a lot I liked about it. But I am not about to change to it again. Two very minor quibbles. 1st, a political point. Yes, I know that we eschew politics, but we may have the occasional Ulsterman (or woman) on this list. This is the United Kingdom of Great Britain and Northern Ireland. The rest of the island of Ireland is Eire, as you correctly say. You refer in the time zones to "GB and Eire", so what happens to poor old Ulster, otherwise known as Northern Ireland? Did you forget it? Or have you got IRA leanings and are lumping it in with Eire?? ;-) The other quibble refers to the clock on the panel. It was insistent that the time in London was 2:15 a.m. when it was in fact 10:15 p.m., and would not allow me to reset it. I was able to reset the clock on the desktop via the PCLOS, but not the clock on the panel. Incidentally, the panel clock leads me to believe that you are in Canada, possibly Montréal. That would explain your French name, coupled with mother tongue standard English! Lisi

2 3

FreeNX generating multiple (frozen) NX client sessions
by Joseph Thames 24 Aug '13

24 Aug '13

Hello, I have TDE installed on a CenOS 6.3 VPS in the cloud, which i use an NX client to access. There seems to be a wierd interaction between TDE side and top panels and FreeNX. I was in the process of adding application icons to the top panel when I was queried by dialog indicating that some part of this process was taking too long (I don't remember the exact message) and did I want to stop the process? I clicked yes, unfortunately. Now nothing works the way it did before. When I try to connect to the server with the NX client, I get multiple session windows, and all of them are frozen (mouse does not work internal to the session window). I can drag the window from its top bar, but I can't close it, either with the X button or with "close" in a pop-up dialog box. A strange aspect is that these session windows are now numbered in their top bar with <2>, <4>, etc. centered. And in the panel popup of my client machine associated with the NX icon, these numbers appear. When I click one of them (from the client), I will get one of these "windows" displayed. It might be just a top bar (actually an empty TDE top panel labeled with a <number> with no window below it, or an empty side panel labeled with a <number>), and it might overlap a complete window (labeled at the top with some other number, e.g. <6>). Some of these windows will have the side and top panels that I had populated before my fatal "yes" click, but they do not respond to mouse button events. The only way to get rid of these windows is the kill the nxssh processes on the server (which happen to be hogging all of the server's CPU time). Then I ran nxserver --terminate <username> getting rid of all of the old NX sessions for my username "bear" and "root". Then rebooted the server, and tried logging in again from my client machine using the NX client. The same multiple-session behavior happened again. There should have been only one NX session window. But there were several. The same thing happened when loging in to root. Does anybody have a clue as to what I can do? TIA, Bear -- Joseph 'Bear' Thames MetaCalculus, LLC and Meta Science Foundation (505) 977-9024 - Cell Phone beartham(a)gmail.com

2 2

KDE 3.5 on Debian Lenny on a JXD S18 Mini Pad with Linux-On-Android
by Alexandre Couture 24 Aug '13

24 Aug '13

Hi, Here is a couple of pictures I took of my little Android 4.1 tablet running Debian Lenny with Linux-On-Android. The machine is a JXD S18 Mini Pad. It cost +- 50$ on Ebay and it has a 1Ghz RockChip rk2928 Arm cpu with 512mb of RAM, a 4.x inch screen and, of course, Wi-Fi. It has 4gb of internal flash memory and I bought a 16gb microSDHC card to use in its memory card slot. Once it is rooted, it can run Linux-On-Android, with a choice of a few Arm-compatible distros. I installed KDE 3.5.10 on it and it works, although it is not much of any real use since the display resolution is only 480x272. It is a little slow, because Android still run in the background and it gets quite low on RAM, but it is approximately as fast as a Pentium 2 on Linux. Even OpenOffice.org and IceWeasel works! On a bigger Android tablet, it could be interesting to use it as an ''Amarok machine'' Have a nice day! -Alexandre

2 1

k3b won't install opensuse 12.2/64
by Larry Stotler 23 Aug '13

23 Aug '13

When I try to install K3b on my openSUSE 12.2/64bit install I get the following error: File './applications/trinity-k3b-3.5.13.1-1.opt.x86_64.rpm' not found on medium 'http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity/rpm/opensuse12.2…' Any ideas?

2 2

Updating from Squeeze to Wheezy
by Lisi Reisz 22 Aug '13

22 Aug '13

Hi, List :-) I have been holding fire in changing my desktop from my nice stable TDE on Squeeze until TDE for Wheezy sounded less dicey. I then delayed further when it recently stabilised because I had too much else going on in my life, and as I said, my system is great. I love TDE 3.5.13.2. But the time has come to upgrade. Other things have simmered down a bit, anyhow temporarily, so the time has come. In the past, I have always reinstalled. This time I want to try upgrading. When I edit my sources.list, I assume that I change the word squeeze to wheezy in my TDE repositories too? (Including Slávek's.) And that I just do a standard Debian update, dist-upgrade? (Yes, I have read the release notes. And yes, I shall make sure that I have got at least two backups of my data in at least two different places.) All advice and tips welcome. "Just go ahead"s perhaps even more welcome! Thanks, Lisi

4 10

no power modes in TDE?
by cwm030＠aol.com 22 Aug '13

22 Aug '13

2 1

setiing PATH
by Greg Madden 21 Aug '13

21 Aug '13

New install, Wheezy:i386 three uers on the system, includes root. "/opt/trintity/" only gets added to the PATH of one user. No mention of trinity stuff in "~.bashrc, ~.profile, /etc/profile, /etc/bash.bashrc". I know how to change the PATH using the above files, want to know how TDE does it, or fails to, on install. TIA -- Peace, Greg

3 2

Minor TDEUI change for Trinity
by Alexandre Couture 19 Aug '13

19 Aug '13

Hi, I just did a small modification to the TDEUI theme at home. In the pictures, you can see that the only change is that now there is a gradient in the background of the text between the TDE logo and the text box in the middle. This modification can be seen in the Control Center or when Konqueror is opened as a web browser. You can download the modification: -The kdeui_mod.zip -At this URL: http://www.filefactory.com/file/2uepu44mm8c3/n/kdeui_mod_zip The folder in the archive should replace the /opt/trinity/share/apps/kdeui/about folder This minor modification could be part of TDE one day, if someone is interested in it. Tell me what you think! Thanks! -Alexandre

4 4

new install updates fail
by cwm030＠aol.com 18 Aug '13

18 Aug '13

3 5

networking issues
by cwm030＠aol.com 18 Aug '13

18 Aug '13

1 0

TDE 3.5.13.2 for Fedora 19
by François Andriot 18 Aug '13

18 Aug '13

Hello, I've just built TDE 3.5.13.2 for Fedora 19. This is an entire build, all packages are there, for both i686 and x86_64. There are LiveCD too. Tim, can you please add the "f19" subfolder to the mirror system ? Until synchronization on official mirrors is complete, you can get the ISO here: http://trinity.mangafrance.com/f19/ISO/ Thanks Francois

1 0

K3B, R14, Wheezy
by Greg Madden 17 Aug '13

17 Aug '13

problems with k3b and depends. "the following packages have unmet dependencies: k3b-trinity : Depends: k3b-data-trinity (= 4:14.0.0-r154-0debian7.0.0+pr11) but 4:14.0.0-r153-0debian8.0.0+pr11 is to be installed..' Also libflac++6 v 1.3.0 is a Debian testing version. " dpkg: dependency problems prevent configuration of libk3b3-trinity: libk3b3-trinity depends on libflac++6 (>= 1.3.0); however: Version of libflac++6:amd64 on system is 1.2.1-6. libk3b3-trinity depends on libflac8 (>= 1.3.0); however: Version of libflac8:amd64 on system is 1.2.1-6." -- Peace, Greg

2 3

Re: [trinity-users] Limited picture size (previews in Konqueror, kview)?
by Thierry de Coulon 16 Aug '13

16 Aug '13

On Thursday 08 August 2013 15:35:03 Nick Leverton wrote: > The settings that affect this are in Control Centre / KDE Components / > File Manager. There is a tab titled "Previews and Meta-Data" which has a > setting for the maximum filesize that will have a preview generated when > browsing in icon mode, and another denoting whether to use an image's > embedded thumbnail (if any). You can also select which access protocols > will use previews, so that you don't accidentally preview large files > over a network. Thank you for the help, but as I had written I did check these. Maximum file size is set at 100MB and the pictures are under 6MB each (compressed). They are stored localy, and other software can show them and create thumbnails. kview and Gwenview don't seem to be able to display the pictures. Only Xfce's ristretto image viewer does the job. Thierry

5 7

File size view in Konqueror
by ant 15 Aug '13

15 Aug '13

Where has it gone? I found it incredibly useful. It seems to have disappeared in Konqueror 3.5.10 Trinity 3.5.13.2 cheers anthony -- Sent from my linux system running Debian 7, desktop trinity-KDE. This email is plain text, not HTML. Any attachments are either .jpeg or .pdf

6 9

A look at KDE 3.3.2 for fun
by Alexandre Couture 13 Aug '13

13 Aug '13

Hi everyone, Here is a KNOPPIX 3.8 (circa 2005) livecd with KDE 3.3.2 that I wanted to post here, just for fun. It is possibly my first linux cd I had at home. Here is the link: http://www.filefactory.com/file/5qzedtzxfte3/knoppix.iso It might not work correctly on your PC, so consider using a VM if you want to try it. Enjoy! -Alexandre

4 6

pulseaudio question
by James Downing 13 Aug '13

13 Aug '13

Hello Trinity Users: I am now running Debian-7 (Wheezy) with Trinity Desktop Environment (TDE) 3.5.13.2. It is great to have preserved this stable and familiar desktop. Thank you to all the developers for maintaining and improving TDE. With Wheezy, the default audio system becomes pulseaudio. Kmix-trinity does not provide the details of the sound card settings through pulseaudio. I found an alternate package, pavucontrol, which does a fair job of providing the functionality I need. However, I miss the clean look and feel of kmix. Is there an alternate package that you could recommend to configure my sound under TDE for pulseaudio ? Or alternately, is there a simple way to switch back to alsa as the basis for the sound, and drop pulseaudio ? Thanks -- James D. Freels, Ph.D. freelsjd(a)gmail.com

1 0

Re: [trinity-users] Limited picture size (previews in Konqueror, kview)?
by Thierry de Coulon 12 Aug '13

12 Aug '13

On Monday 12 August 2013 02:29:23 Greg Madden wrote: > On Sunday 11 August 2013 11:30:47 you wrote: > > On Sunday 11 August 2013 21:02:35 Timothy Pearson wrote: > > > Any chance of us seeing a picture that is known to trigger the bug > > > (so that we can debug this)? Such a picture can even be all > > > white/black as long as it triggers the bug on your system. :-) > > > > > > Thanks! > > > > > > Tim > > > > Here is oner such picture. > > > > Thierry > > Latest TDE stable on Wheezy. > > Hot sure what you mean by viewable. > > what works here, kview gwenview. The default display size is 100% so > only some backgound is viewable until I resize display size. I mean I get a black window, no matter if I fit the image to window or not. The picture can't b viewed, there is no error message, just a plain, black window in kview and a grey background in Gwenview. Ristretto needs two seconds to show the picture, but it does. Someone suggested using Dolphin, well it does not show previews either. Not such a problem, but I used to use the previews to organize pictures. Now it requires Ristretto to see the pictures and then use konqueror as the file manager - but as I use two monitors it's no big problem. I'm making a new install on another computer now so as to test if this could be a local problem. Thierry

1 0

displaying important/action etc emails in KMail 1.9.10 on TDE 3.5.13.2
by Lisi Reisz 10 Aug '13

10 Aug '13

Using KMail 1.9.10 on TDE 3.5.13.2 There always used to be a neat little panel on the right of the toolbar that had a drop-down menu where one could choose what to display. That seems no longer to be there: both I and my husband have lost it. So how do I resurrect the panel? Or how do I get access to the emails that I have marked as being important or for action? (Without going through my emails one by one!) Thanks, Lisi

2 2

Limited picture size (previews in Konqueror, kview)?
by Thierry de Coulon 08 Aug '13

08 Aug '13

Hello all, I'm running Trinity (latest stable) on openSuSE 12.3. In Konqueror (file management). It seems I can get previews for "smaller" pictures (up to at least 4896x3264 pixels), but not for larger ones (7216x5412). Gimp loads these, kview does not, neither can Gwenview. However, if I load the pictures in the Ristretto Image Viewer (that obviously creates thumbnails for it's own use), then refresh in Konqueror, I get the previews. So I guess there is some limit with the "engine" used for picture viewers in Trinity? I must check, but I think it worked OK with the KDE 3 from openSuSE, maybe I'm wrong. Note that I _did _ check the settings in configure-konqueror - Previews & Meta-Data and set the maximum file size at 100MB, to test (the files are around 5 MB jpg), it did not change anything, Thierry

3 2

Konqueror no list view
by Thierry de Coulon 05 Aug '13

05 Aug '13

Hello, Konqueror (file manager - 3.5.10 unsing 3.5.13.2, openSuSE 12.3) only offers "icon view", no "list view". Bug or feature? Thierry

2 3

audacity does not read mp3
by daniele.manghi＠libero.it 05 Aug '13

05 Aug '13

I have trinity on fedora 17. I need to import mp3 with Audacity, and as far as I know, Audacity shuld be able to do so, but the trinity version does not

3 2

kdeinit!
by Jan Litwiński 05 Aug '13

05 Aug '13

I've just installed TDE and J have one problem. When I start TDE session error pops up: Could not start kdeinit. Check your installation. I click ok and system is starts normal. I run commend: janek@linux-fay4:~> ps -e|grep kdeinit 4707 ? 00:00:00 kdeinit kdeinit is running. System openSUSE 12.3 and TDE Any ideas? -- Jan Litwiński http://netsjanek.blogspot.com/ http://netsjanek.bloog.pl/ Linux is like a wigwam no gates no windows but apache inside

2 2

Re: [trinity-users] kmail, TDE, openSuSE 12.3, top posting [solved]
by Thierry de Coulon 04 Aug '13

04 Aug '13

On Sunday 04 August 2013 09:20:15 Thierry de Coulon wrote: > Hello all, > > I just installed TDE on openSuSE 12.3. Things run fine, however I noticed > that kmail now top-posts !?! > > I've tried modifying the templates, but nothing happens. I guess the > changes are not being written/read? It's setup in kmailrc? > > It was OK before, but then I was running KDE 3.5.10 so... > > Thierry So, I deleted all templates in kmailrc, leaving only [GlobalTemplates] PhrasesConverted=true QuoteString=>%_ TemplateReply=%BLANK TemplateReplyAll=%REM="Default reply all template"%-\nOn %ODATEEN %OTIMELONGEN %OFROMNAME wrote: \n%QUOTE\n%BLANK\n%CURSOR And now it works. I had copied kmailrc from a previous install (KDE3), probably it came from there (I found a group of templates named "[Templates #IDENTITY_somenumber]", don't know where they came from. Good night. Thierry

1 0

kdenlive for openSUSE 12.2
by Felix Miata 04 Aug '13

04 Aug '13

What are Trinity users who want Kdenlive using? KDE3 version? KDE4 version? Does Trinity have its own version I haven't discovered? Something else? If I choose the KDE3 version, zypper wants to install a total of 6 packages. If I choose KDE4 version, zypper wants to install a total of 33 packages, including kdelibs4, kdelibs4-core, kdebase4-runtime, soprano, oxygen icon theme & kde4-filesystem. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/

2 2

kmail, TDE, openSuSE 12.3, top posting
by Thierry de Coulon 04 Aug '13

04 Aug '13

Hello all, I just installed TDE on openSuSE 12.3. Things run fine, however I noticed that kmail now top-posts !?! I've tried modifying the templates, but nothing happens. I guess the changes are not being written/read? It's setup in kmailrc? It was OK before, but then I was running KDE 3.5.10 so... Thierry

1 0

Making work a theme made for the old pixmap theme engine of KDE 2
by Alexandre Couture 03 Aug '13

03 Aug '13

Hi everyone! I'm currently looking at making work a pixmap-based theme on TDE 3.5.13.2 From what I could understand, during the KDE3 era, pixmap-based themes were deprecated and replaced by programmed themes, which are not based on lots of small images, as it was in KDE2. But, they are said to still work on KDE3. The point is not especially to use this theme, but to try to create a new one. Here is the URL of the theme I'm trying to make work on TDE: http://kde-look.org/content/show.php?content=153&forumpage=16 I adapted the path in the install script to make it point to the TDE folders and I followed the readme file, but the theme appears without its images, which makes it useless and not working... Is there someone here who would know how to make it work on TDE? Thank you in advance! -Alexandre

1 0

Calendars and IMAP
by ant 01 Aug '13

01 Aug '13

Korganiser suggests: "Calendar on IMAP Server via KMail... Most IMAP servers can be used to hold calendar and address book resources, allowing you to use access your data from just anywhere! " Has anyone tried this recently? If so, how does it work? I have tried all the obvious things, and looked at kolab, which is way more powerful than what I want to do. All I need is a calendar that can be synced to the korganiser calendar. Suggestions? cheers anthony -- Sent from my linux system running Debian 7, desktop trinity-KDE. This email is plain text, not HTML. Any attachments are either .jpeg or .pdf

1 0

Fedora 17 Package Conflicts
by johnsg＠dreamscape.com 31 Jul '13

31 Jul '13

Workaround fixed it. Thanks JohnSG

1 0

Fedora 17 Package Conflicts
by johnsg＠dreamscape.com 29 Jul '13

29 Jul '13

Recent Fedora 17 yum updates are failing. Failure report reads: file ...(various files)... from install of trinity-hal-info-20091130-1.fc17.noarch conflicts with file from package hal-info-20090716-4.fc17.noarch files affected include: .../10freedesktop/ 10-laptop-panel-hardware.fdi 10-modem.fdi 10-usb-card-readers.fdi 10-usb-music-players.fdi 20-vidio-quirk-pm-acer.fdi 20-vidio-quirk-pm-asus.fdi 20-vidio-quirk-pm-hp.fdi 20-vidio-quirk-pm-ibm.fdi 20-vidio-quirk-pm-lenovo.fdi 20-vidio-quirk-pm-sony.fdi 30-keymap-hp.fdi 30-keymap-misc.fdi The trinity-hal-info package is nominally from the repo: trinity-3.5.13-noarch The hal-info package is nominally from the repo: trinity-extras-noarch There is also a disconnect between Fedora Release values: hal-info reports as Release 4.fc17; trinity-hal-info reports as Release 1.fc17. Note there are crossconflicts in both file size and date, so I hesitated to just pick one. Problem is not occuring on current Scientific Linux updates. Don't know if this affects other Fedora versions. If its not a quickfix, any suggested workarounds would be appreciated. Thanks for Trinity Really Really Thanks JohnSG

2 1

TDE 3.5.13.2 login loop
by iadest 27 Jul '13

27 Jul '13

Hi, I'm a TDE user since v. 3.5.13, it's a very good desktop environment as it's configurable, fast and efficient in everyday tasks. Recently I decided to upgrade my Debian notebook (Dell D430 2x1.33GHz 64bit, 2GB RAM, 60GB HDD) to TDE 3.5.13.2. To do this I formatted entire HDD and installed Debian Wheezy NetInstall (amd64) from USB drive. Except typical problems with black screen in console (Intel 950) everything went OK. After installing TDE and rebooting it launched normally. I configured it as I like: turned sound notifications off, tweaked window decoration to KDE2, icons to KDE2 and added cut/opy/paste/Terminal here buttons to Konqueror's toolbar, disabled ctrl-alt-del at log in. Installed Geany IDE and KNeMo to see utilization of network connections, activated KNeMo to display icons. After rebooting it doesn't start properly. It gets to proper login screen, when I log in it waits for few seconds using hard disk, then screen turns black and back to wallpaper, login window appears again. This happens in a loop. Here's a log from .xsession-errors I pulled from console mode. It looks like segfault appears during setting paths. Xsession: X session started for mcbx at pią…, 26 lip 2013, 00:48:00 CEST localuser:mcbx being added to access control list [startkde] Starting startkde. [startkde] This script is /usr/bin/x-session-manager [startkde] TDE version is 3.5.13.2 [startkde] TDE base directory is /opt/trinity [startkde] KDEHOME is not set. [startkde] Set KDEHOME to /home/mcbx/.trinity. [startkde] Setting KDEROOTHOME to /root/.trinity. [startkde] XDG_DATA_DIRS: /opt/trinity/share:/usr/share [startkde] KDEDIR: /opt/trinity [startkde] KDEDIRS: Segmentation fault [startkde] Starting Trinity... [kinit] Pipe closed unexpectedly: No such file or directory [kinit] DCOPServer could not be started, aborting. [kcrash] KCrash: Application 'kdetcompmgr' crashing... [kcrash] Warning: socket connection failed: : PoĹ‚Ä…czenie odrzucone [kcrash] KCrash cannot reach kdeinit, launching directly. [kcrash] KCrash: Application 'ksplash' crashing... [kcrash] Warning: socket connection failed: : PoĹ‚Ä…czenie odrzucone [kcrash] KCrash cannot reach kdeinit, launching directly. [startkde] TDE_FULL_SESSION: true [startkde] KDE_SESSION_UID: 1000 [kinit] Pipe closed unexpectedly: No such file or directory [kinit] DCOPServer could not be started, aborting. [startkde] kdeinit started successfully. [kinit wrapper] Warning: socket connection failed: : Connection refused [kinit] Pipe closed unexpectedly: No such file or directory [kinit] DCOPServer could not be started, aborting. [kcrash] KCrash: Application 'ksmserver' crashing... [kcrash] Warning: socket connection failed: : PoĹ‚Ä…czenie odrzucone [kcrash] KCrash cannot reach kdeinit, launching directly. ERROR: Couldn't attach to DCOP server! [startkde] Shutting down Trinity... [kinit wrapper] Warning: socket connection failed: : Connection refused [kinit wrapper] Error: Can't contact kdeinit! [startkde] Running Trinity shutdown scripts... [startkde] Trinity shutdown complete. What should I do to run Trinity? 3.5.13.1 was running well in this machine. MCbx

1 1

Some Mageia package depend on packages older than those installed...
by Thierry de Coulon 26 Jul '13

26 Jul '13

Hello all, I've been trying again to install TDE on Mageia 3 (following the install instructions). Most of it seems OK, but the install fails with a message saying some packages can't be installed because they depend on packages older than those installed. The packages in question are trinity-perld-dcop, trinity-tdebindings and trinity-desktop. However, I've noticed that links, when installing software from Mageia, contain a directory "cauldron", and uname -a returns an "mga4" element. I associate "cauldron" with a development version, am I right? So could it be that I somehow got a development version of Mageia? The md5 hash of my DVD is not the same as that given on the mageia site ?!? I am re-downloading a fresh image from Mageia 3 now, but if anyone has more knowledge about Mageia than me, I'd be happy for any information about the version I should install for TDE... Regards, Thierry

3 3

3.5.13.2 coming soon
by Slávek Banko 24 Jul '13

24 Jul '13

Hi all, who are using my PPA with preliminary packages for stable branch 3.5.13.x, note that you can expect in the coming days massive update. Currently I am uploading packages with the final version 3.5.13.2 to build. Since the speed of buildes is different for each platform, you may encounter occasional inconsistencies - in this case, simply wait for the update. Complete list of changes since version 3.5.13.1 can be found on wiki: http://www.trinitydesktop.org/wiki/bin/view/Documentation/Releases_3_5_13_2… A complete set of package builds for these versions distributions: + Debian 6.0 - Squeeze + Debian 7.0 - Wheezy + Ubuntu 10.04 - Lucid + Ubuntu 10.10 - Maverick + Ubuntu 11.04 - Natty + Ubuntu 11.10 - Oneiric + Ubuntu 12.04 - Precise + Ubuntu 12.10 - Quantal + Ubuntu 13.04 - Raring The official announcement of the new version will follow after the completion of build and subsequent publishing packages on the mirror. Thank you for your patience. Slavek

10 52

Testing TDE R14
by Alexandre Couture 24 Jul '13

24 Jul '13

Hello, I would really like to do more testing of TDE R14 nightly builds on Ubuntu 13.04, but the TDE servers seems to be completely overwhelm since a few week, especially since Ubuntu nightly builds LiveCDs are available. When I want to update to the latest nightly build, it downloads at less than 56k Internet speed, so I often have to cancel the download because I don't want to wait for 15 hours for a it. Is there some ways that could be considered to make faster the TDE servers? In the list of distros where nightly builds are available, I see completely outdated versions of linux distributions. Is it still necessary to build nightly builds for obsolete versions of Ubuntu, as an example? Also, maybe a weekly Ubuntu nightly build LiveCD could be enough for its purpose, making the TDE servers save on bandwidth and improve its performance. Thanks! -Alexandre

6 16

Trinity Desktop Environment 3.5.13.2 SRU Released!
by Timothy Pearson 22 Jul '13

22 Jul '13

For those who are not signed up for the TDE Announcements mailing list, TDE v3.5.13.2 was released today! The release announcement can be viewed at http://trinity-announce.pearsoncomputing.net/?0::28 or on the TDE website at http://www.trinitydesktop.org Timothy Pearson Trinity Desktop Project

1 0

battery and power troubles
by David Emerson 20 Jul '13

20 Jul '13

Hi there, Just installed Debian 7.1 Wheezy and Trinity 3.5.13.2 on a Lenovo W500 The tray icon that usually shows my power status is there, but gives only a tooltip, "No information about battery and AC status available" Looking at kcontrol > KDE Components > Service Manager, I see that in Load-on-Demand Services, Laptop Battery Monitor is not running. I am able to see the power status and battery readings in /sys/class/power_supply, for both AC and BAT0 How can I get that service loaded? Thanks! ~David

1 0

Invalid signatures message received when running apt-get update
by Ken Heard 18 Jul '13

18 Jul '13

I think I know what a signature means in computerese, but I do not know what to do when the following message is received at the end of an apt-get update run. W: GPG error: http://ppa.quickbuild.pearsoncomputing.net squeeze Release: The following signatures were invalid: BAGSIG 43F1DC4F2B8638D00 QuickbuildTrinity Desktop Environment The result was that I was not allowed to download and then install some TDE packages. How to fix? Regards, Ken Heard

1 0

3.5.13.2 update breaks icons in T-menu
by Julius Schwartzenberg 18 Jul '13

18 Jul '13

I let my system do the full 3.5.13.2 upgrade, but now almost all the icons in my T-menu (kicker menu) are gone. The program icons are still there, but the category icons are pretty much all gone. I saw the same behavior on another system of another user that upgraded. I'm using Ubuntu Precise. I have no other DEs installed. Does anyone here know what's going on and whether it can be solved? Thanks in advance, Julius

5 5

Apt-get errors
by Roel Wagenaar 17 Jul '13

17 Jul '13

L.S. When updateing debian wheezy on amd64 with apt-get or aptitude I get this error: GPG-error: http://ppa.quickbuild.pearsoncomputing.net wheezy Release: The next signatures were invalid: BADSIG 43F1DC4F2B8638D0 QuickBuild Trinity Desktop Environment. Ophalen van bzip2:/var/lib/apt/lists/partial/ppa.quickbuild.pearsoncomputing.net_trinity_trinity-builddeps-v3.5.13_debian_dists_wheezy_main_binary-amd64_Packages has failed Hash-sum does not match. Is this a matter of time and patience or a real error? -- Roel Wagenaar, Linux-User #469851 with the Linux Counter; http://linuxcounter.net/ Antw.: Omdat het de volgorde verstoord waarin mensen tekst lezen. Vraag: Waarom is top-posting een slechte gewoonte? Antw.: Top-posting. Vraag: Wat is het meest ergerlijke in e-mail? Always remember you're unique, just like everyone else.

3 4

PCLinuxOS TDE non-official remaster version 2013, July 3 is ready to download!
by Alexandre Couture 15 Jul '13

15 Jul '13

Hello everyone! My PCLinuxOS TDE non-official remaster version 2013, July 3 is ready to download! I call it non-official because it doesn't come from the PCLOS team and since it contains software coming from outside of their repos, it is also not supported by them. It only has a special ''permission to exist'' from the PCLinuxOS dev team. It can be seen as a whole as the much-loved PCLOS 2007, but fully updated and upgraded. It is a complete system that can be used as a LiveDVD or it can be installed (from the LiveDVD). New on this release: -Fully updated PCLinuxOS 2013 base system -TDE 3.5.13.2 -A theme switch Zenity script to let the user switch between the more modern theme I use and TDE default theme, to please more users. -A SuperKaramba theme pack -It can now be downloaded as a simgle ISO file, and not a multi-part zip file! On this LivCD: -Tons of TDE software and major apps like LibreOffice, Firefox and Gimp Login info (on the LiveCD): Regular user:guest Password:guest Super user: root Password:root System requirement: A x86 computer with at least 256mb of RAM. It is a 32bit system, but it can be installed on a 64bit system too. Download link: http://www.filefactory.com/file/58az0tb7atkr/PCLinuxOS_n-o_TDE_remaster_3Ju… http://www.filefactory.com/file/60qc1bz69egz/n/Readme_First_pdf http://www.filefactory.com/file/70m9x7neh6w1/n/PCLinuxOS_n-o_TDE_remaster_3… (this file can be placed on TDE mirrors) Md5Sum: 703a5613a3a2c0d89bb1dcadba629fb4 If you like what you see, you can consider giving some money to the Trinity Desktop Environment project! Give me your comments! -Alexandre

6 19

External mike not working on Dell laptop
by Patricia J. Hawkins 13 Jul '13

13 Jul '13

Hi, I have a HDA Intel soundcard in a Dell Inspiron 1420. Output sound is currently fine, even Timidity is working seamlessly. However, input sound using the front mike-jack isn't working (there is no built-in mike). This used to work (took some blood, sweat, tears, pulseaudio eradication and alsa-base.conf in the past) I haven't used the external mike for some time (got a smartphone, stopped using Skype) so don't know when it stopped working. I've tested the microphone I'm using on another computer, it's fine. Help? Here are today's running notes, followed by my last dmesg: <2013-07-13 Sat> Sound working beautifully except for mike in; static recorded when I try w/ a mike plugged in, using krec. Fiddling with mixer settings can also record NO static. Goody. Looking at: https://wiki.ubuntu.com/SndHdaIntelSoundProblems lsmod shows snd_hda_intel being used. lspci 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) cat /proc/asound/card*/codec\#*|grep -i codec Codec: SigmaTel STAC9228 Codec: Conexant ID 2c06 ---- The following alsa commands no longer work, and couldn't immediately figure out how to do this as a service, /etc/init.d/alsa-utils stop rmmod snd_hda_intel modprobe snd-hda-intel /etc/init.d/alsa-utils start so I tried stopping sound from MainMenu->System Settings->Sound and got: "ERROR: Module snd_hda_intel is in use" so apparently didn't really stop ALSA. Bottom of /etc/alsa-base.conf had: -- options snd-hda-intel power_save=10 power_save_controller=N options snd-hda-intel model=5stack -- changed to: options snd-hda-intel model=5stack power_save=10 power_save_controller=N and then: options snd-hda-intel model=3stack power_save=10 power_save_controller=N (reasoning that 3stack USED to be the magic incantation, then quit working, then it was 5stack...) output sound kept working just fine, as did the mixer, but didn't fix the mike problem. ++++++++++++++ dmesg ++++++++++++++++++++++++ [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-32-generic-pae (buildd@aatxe) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #51-Ubuntu SMP Thu Mar 21 16:09:48 UTC 2013 (Ubuntu 3.0.0-32.51-generic-pae 3.0.69) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Dell Inc. Inspiron 1420 /0DT492, BIOS A09 07/11/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable [ 0.000000] 5 base 0DF700000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 3576MB, range: 8MB, type UC [ 0.000000] reg 5, base: 3575MB, range: 1MB, type UC [ 0.000000] total RAM covered: 7671M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3575MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3576MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: 35a6c000 - 36d2e000 [ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT df66f200 00054 (v01 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: FACP df66f09c 000F4 (v04 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: DSDT df66f800 05676 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS df67e000 00040 [ 0.000000] ACPI: HPET df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC df66f400 00068 (v01 DELL M08 27D8070B ASL 00000047) [ 0.000000] ACPI: MCFG df66f3c0 0003E (v16 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: BOOT df66efc0 00028 (v01 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: SSDT df66d9fa 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3716MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1046012 [ 0.000000] free_area_init_node: node 0, pgdat c17ff100, node_mem_map f366c200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7433 pages used for memmap [ 0.000000] HighMem zone: 810342 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7bd1000 s29952 r0 d23296 u53248 [ 0.000000] pcpu-alloc: s29952 r0 d23296 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1036795 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-32-generic-pae root=UUID=71041dd2-a8b7-4360-a399-c3c719228b29 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 18874112 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00120000) [ 0.000000] Memory: 4098648k/4718592k available (5549k kernel code, 85400k reserved, 2684k data, 724k init, 3271100k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc180b000 - 0xc18c0000 ( 724 kB) [ 0.000000] .data : 0xc156b5fc - 0xc180a600 (2684 kB) [ 0.000000] .text : 0xc1000000 - 0xc156b5fc (5549 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.493 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.98 BogoMIPS (lpj=7181972) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004052] AppArmor: AppArmor initialized [ 0.004054] Yama: becoming mindful. [ 0.004119] Mount-cache hash table entries: 512 [ 0.004270] Initializing cgroup subsys cpuacct [ 0.004277] Initializing cgroup subsys memory [ 0.004286] Initializing cgroup subsys devices [ 0.004289] Initializing cgroup subsys freezer [ 0.004291] Initializing cgroup subsys net_cls [ 0.004294] Initializing cgroup subsys blkio [ 0.004302] Initializing cgroup subsys perf_event [ 0.004339] CPU: Physical Processor ID: 0 [ 0.004341] CPU: Processor Core ID: 0 [ 0.004345] mce: CPU supports 6 MCE banks [ 0.004356] CPU0: Thermal monitoring enabled (TM2) [ 0.004360] using mwait in idle threads. [ 0.009511] ACPI: Core revision 20110413 [ 0.014934] ftrace: allocating 25262 entries in 50 pages [ 0.016057] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016530] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059692] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.060003] PEBS disabled due to CPU errata. [ 0.060003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] CPU 1 irqstacks, hard=f74ca000 soft=f74cc000 [ 0.060003] Booting Node 0, Processors #1 Ok. [ 0.060003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.148024] Brought up 2 CPUs [ 0.148027] Total of 2 processors activated (7181.96 BogoMIPS). [ 0.149092] devtmpfs: initialized [ 0.150354] print_constraints: dummy: [ 0.150390] Time: 17:57:10 Date: 07/13/13 [ 0.150440] NET: Registered protocol family 16 [ 0.150476] Trying to unpack rootfs image as initramfs... [ 0.152048] EISA bus registered [ 0.152067] ACPI: bus type pci registered [ 0.152142] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.152146] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.152148] PCI: Using MMCONFIG for extended config space [ 0.152151] PCI: Using configuration type 1 for base access [ 0.152159] dmi type 0xB1 record - unknown flag [ 0.153482] bio: create slab <bio-0> at 0 [ 0.155239] ACPI: EC: Look up EC in DSDT [ 0.166672] ACPI: SSDT df66e530 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.167088] ACPI: Dynamic OEM Table Load: [ 0.167093] ACPI: SSDT (null) 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.167260] ACPI: SSDT df66dec6 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.167650] ACPI: Dynamic OEM Table Load: [ 0.167654] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.167943] ACPI: SSDT df66e774 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.168356] ACPI: Dynamic OEM Table Load: [ 0.168360] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.168475] ACPI: SSDT df66e4ab 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.168867] ACPI: Dynamic OEM Table Load: [ 0.168871] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.169122] ACPI: Interpreter enabled [ 0.169131] ACPI: (supports S0 S3 S4 S5) [ 0.169154] ACPI: Using IOAPIC for interrupt routing [ 0.205966] ACPI: No dock devices found. [ 0.205970] HEST: Table not found. [ 0.205977] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.216186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.236519] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.236524] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.236527] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.236531] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.236534] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.236537] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.236541] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.236544] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.236547] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.236550] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.236554] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.236557] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] [ 0.236560] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.236585] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.236647] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.236665] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.236676] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.236684] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.236733] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.236748] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] [ 0.236857] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.236922] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.236971] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.237036] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.237104] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.237133] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.237255] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.237262] pci 0000:00:1a.7: PME# disabled [ 0.237296] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.237322] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.237442] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.237448] pci 0000:00:1b.0: PME# disabled [ 0.237481] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.237610] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.237616] pci 0000:00:1c.0: PME# disabled [ 0.237652] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.237779] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.237785] pci 0000:00:1c.1: PME# disabled [ 0.237823] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 [ 0.237951] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.237957] pci 0000:00:1c.3: PME# disabled [ 0.237999] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604 [ 0.238126] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.238132] pci 0000:00:1c.5: PME# disabled [ 0.238166] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.238231] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.238280] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.238345] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.238394] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.238459] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.238524] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.238552] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.238674] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.238681] pci 0000:00:1d.7: PME# disabled [ 0.238708] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.238820] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.238946] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.238953] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.238959] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.238967] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.239033] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.239052] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.239066] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.239081] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.239095] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.239110] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.239173] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.239205] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.239219] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.239233] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.239247] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.239261] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.239276] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] [ 0.239352] pci 0000:00:1f.2: PME# supported from D3hot [ 0.239358] pci 0000:00:1f.2: PME# disabled [ 0.239383] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.239403] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] [ 0.239451] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.239568] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.239575] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.239582] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.239592] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.239765] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 [ 0.239825] pci 0000:0c:00.0: reg 10: [mem 0xfe8ff000-0xfe8fffff] [ 0.240270] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.240285] pci 0000:0c:00.0: PME# disabled [ 0.240359] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.240401] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.240408] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.240414] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.240424] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.240494] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.240500] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.240507] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.240517] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.240663] pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200 [ 0.240737] pci 0000:09:00.0: reg 10: [mem 0xfe5f0000-0xfe5fffff 64bit] [ 0.241181] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.241194] pci 0000:09:00.0: PME# disabled [ 0.241338] pci 0000:00:1c.5: PCI bridge to [bus 09-09] [ 0.241344] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) [ 0.241351] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.241360] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.241416] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 [ 0.241445] pci 0000:03:01.0: reg 10: [mem 0xfe4ff800-0xfe4fffff] [ 0.241561] pci 0000:03:01.0: supports D1 D2 [ 0.241564] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241570] pci 0000:03:01.0: PME# disabled [ 0.241595] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 [ 0.241621] pci 0000:03:01.1: reg 10: [mem 0xfe4ff500-0xfe4ff5ff] [ 0.241735] pci 0000:03:01.1: supports D1 D2 [ 0.241737] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241744] pci 0000:03:01.1: PME# disabled [ 0.241769] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 [ 0.241795] pci 0000:03:01.2: reg 10: [mem 0xfe4ff600-0xfe4ff6ff] [ 0.241911] pci 0000:03:01.2: supports D1 D2 [ 0.241914] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241920] pci 0000:03:01.2: PME# disabled [ 0.241945] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 [ 0.241970] pci 0000:03:01.3: reg 10: [mem 0xfe4ff700-0xfe4ff7ff] [ 0.242084] pci 0000:03:01.3: supports D1 D2 [ 0.242086] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242093] pci 0000:03:01.3: PME# disabled [ 0.242174] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.242181] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.242188] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.242197] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.242201] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.242205] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.242208] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.242212] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.242215] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.242219] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.242222] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.242226] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.242229] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.242233] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.242236] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.242240] pci 0000:00:1e.0: bridge window [mem 0xffb00000-0xffefffff] (subtractive decode) [ 0.242243] pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) [ 0.242281] pci_bus 0000:00: on NUMA node 0 [ 0.242288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.242650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.242798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.242865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.242934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.243002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.243067] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.243072] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.243074] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.256264] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.256355] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.256443] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 0.256531] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 0.256619] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.256711] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.256803] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.256881] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.257037] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.257061] vgaarb: loaded [ 0.257063] vgaarb: bridge control possible 0000:00:02.0 [ 0.257336] SCSI subsystem initialized [ 0.257412] libata version 3.00 loaded. [ 0.257475] usbcore: registered new interface driver usbfs [ 0.257490] usbcore: registered new interface driver hub [ 0.257528] usbcore: registered new device driver usb [ 0.257644] PCI: Using ACPI for IRQ routing [ 0.260445] PCI: pci_cache_line_size set to 64 bytes [ 0.260610] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.260614] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff [ 0.260746] NetLabel: Initializing [ 0.260749] NetLabel: domain hash size = 128 [ 0.260751] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.260764] NetLabel: unlabeled traffic allowed by default [ 0.260814] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.260822] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.260828] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.264187] Switching to clocksource hpet [ 0.267397] Switched to NOHz mode on CPU #0 [ 0.267445] Switched to NOHz mode on CPU #1 [ 0.273656] AppArmor: AppArmor Filesystem Enabled [ 0.273704] pnp: PnP ACPI init [ 0.273726] ACPI: bus type pnp registered [ 0.283929] pnp 00:00: [bus 00-ff] [ 0.283934] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.283937] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.283940] pnp 00:00: [io 0x0d00-0xffff window] [ 0.283944] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.283947] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.283950] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.283953] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.283956] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.283959] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.283963] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.283966] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.283969] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.283972] pnp 00:00: [mem 0xffb00000-0xffefffff window] [ 0.283975] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.284106] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.284142] pnp 00:01: [irq 12] [ 0.284174] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.284195] pnp 00:02: [io 0x0060] [ 0.284198] pnp 00:02: [io 0x0064] [ 0.284200] pnp 00:02: [io 0x0062] [ 0.284203] pnp 00:02: [io 0x0066] [ 0.284210] pnp 00:02: [irq 1] [ 0.284241] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.284261] pnp 00:03: [io 0x0070-0x0071] [ 0.284268] pnp 00:03: [irq 8] [ 0.284270] pnp 00:03: [io 0x0072-0x0077] [ 0.284302] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.284324] pnp 00:04: [io 0x0061] [ 0.284327] pnp 00:04: [io 0x0063] [ 0.284329] pnp 00:04: [io 0x0065] [ 0.284332] pnp 00:04: [io 0x0067] [ 0.284364] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.284383] pnp 00:05: [io 0x0c80-0x0cff] [ 0.284463] system 00:05: [io 0x0c80-0x0cff] could not be reserved [ 0.284468] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.284492] pnp 00:06: [dma 4] [ 0.284495] pnp 00:06: [io 0x0000-0x000f] [ 0.284498] pnp 00:06: [io 0x0080-0x0085] [ 0.284500] pnp 00:06: [io 0x0087-0x008f] [ 0.284503] pnp 00:06: [io 0x00c0-0x00df] [ 0.284506] pnp 00:06: [io 0x0010-0x001f] [ 0.284508] pnp 00:06: [io 0x0090-0x0091] [ 0.284511] pnp 00:06: [io 0x0093-0x009f] [ 0.284545] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.284564] pnp 00:07: [io 0x00f0-0x00ff] [ 0.284571] pnp 00:07: [irq 13] [ 0.284606] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.284655] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.284720] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.284725] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.284913] pnp 00:09: [io 0x0900-0x097f] [ 0.284916] pnp 00:09: [io 0x0092] [ 0.284918] pnp 00:09: [io 0x00b2-0x00b3] [ 0.284921] pnp 00:09: [io 0x0020-0x0021] [ 0.284927] pnp 00:09: [io 0x00a0-0x00a1] [ 0.284929] pnp 00:09: [irq 0 disabled] [ 0.284932] pnp 00:09: [io 0x04d0-0x04d1] [ 0.284935] pnp 00:09: [io 0x1000-0x1005] [ 0.284938] pnp 00:09: [io 0x1008-0x100f] [ 0.284961] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.284966] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285045] system 00:09: [io 0x0900-0x097f] has been reserved [ 0.285049] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.285053] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.285074] pnp 00:0a: [io 0xf400-0xf4fe] [ 0.285077] pnp 00:0a: [io 0x0086] [ 0.285080] pnp 00:0a: [io 0x1006-0x1007] [ 0.285083] pnp 00:0a: [io 0x100a-0x1059] [ 0.285085] pnp 00:0a: [io 0x1060-0x107f] [ 0.285088] pnp 00:0a: [io 0x1080-0x10bf] [ 0.285090] pnp 00:0a: [io 0x10c0-0x10df] [ 0.285093] pnp 00:0a: [io 0x1010-0x102f] [ 0.285096] pnp 00:0a: [io 0x0809] [ 0.285119] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285123] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285127] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285131] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285207] system 00:0a: [io 0xf400-0xf4fe] has been reserved [ 0.285211] system 00:0a: [io 0x1080-0x10bf] has been reserved [ 0.285215] system 00:0a: [io 0x10c0-0x10df] has been reserved [ 0.285218] system 00:0a: [io 0x0809] has been reserved [ 0.285223] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.297720] pnp 00:0b: [mem 0x00000000-0x0009efff] [ 0.297724] pnp 00:0b: [mem 0x0009f000-0x0009ffff] [ 0.297727] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.297730] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.297733] pnp 00:0b: [mem 0x00100000-0xdf66d7ff] [ 0.297736] pnp 00:0b: [mem 0xdf66d800-0xdf6fffff] [ 0.297738] pnp 00:0b: [mem 0xdf700000-0xdf7fffff] [ 0.297741] pnp 00:0b: [mem 0xdf700000-0xdfefffff] [ 0.297744] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.297747] pnp 00:0b: [mem 0xffa00000-0xffafffff] [ 0.297749] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] [ 0.297752] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] [ 0.297755] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] [ 0.297757] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] [ 0.297760] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] [ 0.297763] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] [ 0.297765] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] [ 0.297768] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] [ 0.297771] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.297941] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved [ 0.297945] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.297949] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.297953] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.297957] system 00:0b: [mem 0x00100000-0xdf66d7ff] could not be reserved [ 0.297961] system 00:0b: [mem 0xdf66d800-0xdf6fffff] has been reserved [ 0.297965] system 00:0b: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.297968] system 00:0b: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.297972] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.297976] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved [ 0.297980] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.297984] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.297987] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.297991] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.297995] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.297998] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.298002] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.298006] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.298009] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.298014] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.298094] pnp: PnP ACPI: found 12 devices [ 0.298097] ACPI: ACPI bus type pnp unregistered [ 0.298101] PnPBIOS: Disabled by ACPI PNP [ 0.334681] PCI: max bus depth: 1 pci_try_num: 2 [ 0.334770] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.334776] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 0.334782] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.334787] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.334791] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0600000-0xf07fffff] [ 0.334796] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.334801] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.334805] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.334810] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.334818] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff] [ 0.334824] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.334834] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.334839] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.334846] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.334853] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.334863] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.334867] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.334875] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.334881] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.334891] pci 0000:00:1c.5: PCI bridge to [bus 09-09] [ 0.334895] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.334903] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.334910] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.334920] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.334922] pci 0000:00:1e.0: bridge window [io disabled] [ 0.334930] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.334936] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.334968] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.334975] pci 0000:00:1c.0: setting latency timer to 64 [ 0.334992] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.334998] pci 0000:00:1c.1: setting latency timer to 64 [ 0.335011] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.335018] pci 0000:00:1c.3: setting latency timer to 64 [ 0.335027] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.335033] pci 0000:00:1c.5: setting latency timer to 64 [ 0.335044] pci 0000:00:1e.0: setting latency timer to 64 [ 0.335049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.335053] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.335056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.335059] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.335062] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.335065] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.335068] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.335071] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.335074] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.335077] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.335080] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.335083] pci_bus 0000:00: resource 15 [mem 0xffb00000-0xffefffff] [ 0.335087] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] [ 0.335090] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff] [ 0.335093] pci_bus 0000:0b: resource 1 [mem 0xf0600000-0xf07fffff] [ 0.335096] pci_bus 0000:0b: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.335099] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] [ 0.335103] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.335106] pci_bus 0000:0c: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.335109] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] [ 0.335112] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.335116] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.335119] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] [ 0.335122] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.335125] pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.335129] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.335132] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.335135] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.335138] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.335141] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.335145] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.335148] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.335151] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.335154] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.335157] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.335160] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.335163] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.335166] pci_bus 0000:03: resource 15 [mem 0xffb00000-0xffefffff] [ 0.335169] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff] [ 0.335222] NET: Registered protocol family 2 [ 0.335311] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.335615] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.336115] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.336334] TCP: Hash tables configured (established 131072 bind 65536) [ 0.336337] TCP reno registered [ 0.336340] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.336351] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.336474] NET: Registered protocol family 1 [ 0.336494] pci 0000:00:02.0: Boot video device [ 0.336523] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.336547] pci 0000:00:1a.0: PCI INT A disabled [ 0.336562] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.336585] pci 0000:00:1a.1: PCI INT B disabled [ 0.336601] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.336639] pci 0000:00:1a.7: PCI INT C disabled [ 0.336665] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.336689] pci 0000:00:1d.0: PCI INT A disabled [ 0.336699] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.336723] pci 0000:00:1d.1: PCI INT B disabled [ 0.336732] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.336755] pci 0000:00:1d.2: PCI INT C disabled [ 0.336767] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.336787] pci 0000:00:1d.7: PCI INT A disabled [ 0.336835] PCI: CLS 64 bytes, default 64 [ 0.336843] Simple Boot Flag at 0x79 set to 0x1 [ 0.337239] audit: initializing netlink socket (disabled) [ 0.337249] type=2000 audit(1373738230.332:1): initialized [ 0.363396] highmem bounce pool size: 64 pages [ 0.363404] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.366414] VFS: Disk quotas dquot_6.5.2 [ 0.366495] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.367367] fuse init (API version 7.16) [ 0.367483] msgmni has been set to 1616 [ 0.367887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.367920] io scheduler noop registered [ 0.367923] io scheduler deadline registered [ 0.367940] io scheduler cfq registered (default) [ 0.368122] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.368195] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.368289] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.368352] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.368443] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.368506] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.368598] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.368661] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.368785] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.368815] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.368891] intel_idle: MWAIT substates: 0x22220 [ 0.368893] intel_idle: does not run on family 6 model 15 [ 0.368974] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.369037] ACPI: AC Adapter [AC] (on-line) [ 0.369126] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.369541] ACPI: Lid Switch [LID] [ 0.369594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.369600] ACPI: Power Button [PBTN] [ 0.369655] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.369659] ACPI: Sleep Button [SBTN] [ 0.369696] ACPI: acpi_idle registered with cpuidle [ 0.369863] Monitor-Mwait will be used to enter C-1 state [ 0.369874] Monitor-Mwait will be used to enter C-2 state [ 0.369882] Monitor-Mwait will be used to enter C-3 state [ 0.369887] Marking TSC unstable due to TSC halts in idle [ 0.376233] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.376236] ACPI: Thermal Zone [THM] (40 C) [ 0.376273] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.376325] ERST: Table is not found! [ 0.376429] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.392128] isapnp: Scanning for PnP cards... [ 0.493449] ACPI: Battery Slot [BAT0] (battery present) [ 0.720971] Freeing initrd memory: 19208k freed [ 0.755221] isapnp: No Plug & Play device found [ 0.774022] Linux agpgart interface v0.103 [ 0.774171] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.774267] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.774962] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.775096] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.776692] brd: module loaded [ 0.777434] loop: module loaded [ 0.777656] ata_piix 0000:00:1f.1: version 2.13 [ 0.777671] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.777716] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.778110] scsi0 : ata_piix [ 0.778221] scsi1 : ata_piix [ 0.778633] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.778637] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.778812] ata2: port disabled. ignoring. [ 0.779111] Fixed MDIO Bus: probed [ 0.779141] PPP generic driver version 2.4.2 [ 0.779188] tun: Universal TUN/TAP device driver, 1.6 [ 0.779190] tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com> [ 0.779304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.779323] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.779343] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.779348] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.779388] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.779423] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.783317] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.783336] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.796021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.796163] hub 1-0:1.0: USB hub found [ 0.796168] hub 1-0:1.0: 4 ports detected [ 0.796263] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.796278] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.796283] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.796331] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.796362] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.800257] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.800275] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.816020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.816148] hub 2-0:1.0: USB hub found [ 0.816153] hub 2-0:1.0: 6 ports detected [ 0.816252] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816270] uhci_hcd: USB Universal Host Controller Interface driver [ 0.816296] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.816306] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.816311] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.816355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.816386] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 0.816535] hub 3-0:1.0: USB hub found [ 0.816541] hub 3-0:1.0: 2 ports detected [ 0.816627] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.816637] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.816641] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.816683] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.816729] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 0.816883] hub 4-0:1.0: USB hub found [ 0.816888] hub 4-0:1.0: 2 ports detected [ 0.816974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.816984] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.816989] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.817029] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.817059] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 0.817210] hub 5-0:1.0: USB hub found [ 0.817215] hub 5-0:1.0: 2 ports detected [ 0.817299] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.817308] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.817313] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.817363] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.817393] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 0.817541] hub 6-0:1.0: USB hub found [ 0.817546] hub 6-0:1.0: 2 ports detected [ 0.817631] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.817641] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.817645] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.817687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.817717] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.817870] hub 7-0:1.0: USB hub found [ 0.817874] hub 7-0:1.0: 2 ports detected [ 0.818027] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.821191] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.821199] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.821332] mousedev: PS/2 mouse device common for all mice [ 0.821507] rtc_cmos 00:03: RTC can wake from S4 [ 0.821633] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.821681] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.821780] device-mapper: uevent: version 1.0.3 [ 0.821870] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel(a)redhat.com [ 0.821916] EISA: Probing bus 0 at eisa.0 [ 0.821918] EISA: Cannot allocate resource for mainboard [ 0.821921] Cannot allocate resource for EISA slot 1 [ 0.821924] Cannot allocate resource for EISA slot 2 [ 0.821926] Cannot allocate resource for EISA slot 3 [ 0.821929] Cannot allocate resource for EISA slot 4 [ 0.821931] Cannot allocate resource for EISA slot 5 [ 0.821933] Cannot allocate resource for EISA slot 6 [ 0.821936] Cannot allocate resource for EISA slot 7 [ 0.821938] Cannot allocate resource for EISA slot 8 [ 0.821940] EISA: Detected 0 cards. [ 0.821952] cpufreq-nforce2: No nForce2 chipset. [ 0.822030] cpuidle: using governor ladder [ 0.822161] cpuidle: using governor menu [ 0.822164] EFI Variables Facility v0.08 2004-May-17 [ 0.822549] TCP cubic registered [ 0.822726] NET: Registered protocol family 10 [ 0.823515] NET: Registered protocol family 17 [ 0.823533] Registering the dns_resolver key type [ 0.823560] Using IPI No-Shortcut mode [ 0.823656] PM: Hibernation image not present or could not be loaded. [ 0.823671] registered taskstats version 1 [ 0.824810] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.833323] Magic number: 5:229:997 [ 0.833436] rtc_cmos 00:03: setting system clock to 2013-07-13 17:57:11 UTC (1373738231) [ 0.834388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.834390] EDD information not available. [ 0.940514] ata1.00: ATAPI: SONY CD-RW/DVD-ROM CRX880A, KD09, max UDMA/33 [ 0.956391] ata1.00: configured for UDMA/33 [ 0.957921] scsi 0:0:0:0: CD-ROM SONY CDRWDVD CRX880A KD09 PQ: 0 ANSI: 5 [ 0.961072] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.961076] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.961265] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.961332] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.961527] Freeing unused kernel memory: 724k freed [ 0.961880] Write protecting the kernel text: 5552k [ 0.962033] Write protecting the kernel read-only data: 2256k [ 0.962035] NX-protecting the kernel data: 4688k [ 0.984901] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 0.985201] zram: num_devices not specified. Using default: 1 [ 0.985204] zram: Creating 1 devices ... [ 0.989812] udevd[92]: starting version 173 [ 1.059503] tg3.c:v3.119 (May 18, 2011) [ 1.059533] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.059552] tg3 0000:09:00.0: setting latency timer to 64 [ 1.060763] [drm] Initialized drm 1.1.0 20060810 [ 1.111386] Adding 2059288k swap on /dev/zram0. Priority:100 extents:1 across:2059288k SS [ 1.123676] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.123683] i915 0000:00:02.0: setting latency timer to 64 [ 1.140524] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.158121] sdhci: Secure Digital Host Controller Interface driver [ 1.158125] sdhci: Copyright(c) Pierre Ossman [ 1.162863] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1a:a0:fe:24:1e [ 1.162869] tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0]) [ 1.162873] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 1.162877] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.164286] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.164290] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.164767] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 1.164774] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.164776] [drm] Driver supports precise vblank timestamp query. [ 1.164829] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.208240] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 1.208316] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) [ 1.208342] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.209393] mmc0: no vmmc regulator found [ 1.210424] Registered led device: mmc0:: [ 1.211709] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 1.472959] [drm] initialized overlay support [ 1.621840] fbcon: inteldrmfb (fb0) is primary device [ 1.621901] Console: switching to colour frame buffer device 180x56 [ 1.621943] fb0: inteldrmfb frame buffer device [ 1.621945] drm: registered panic notifier [ 1.634217] acpi device:34: registered as cooling_device2 [ 1.634542] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input4 [ 1.634591] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 1.634612] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 1.634652] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.634821] ahci 0000:00:1f.2: version 3.0 [ 1.634838] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.634900] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.634979] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.634984] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.634991] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.644624] scsi2 : ahci [ 1.644759] scsi3 : ahci [ 1.644857] scsi4 : ahci [ 1.645060] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 45 [ 1.645063] ata4: DUMMY [ 1.645067] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 45 [ 1.708240] firewire_core: created device fw0: GUID 384fc0000317bd81, S400 [ 1.968242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.968274] ata5: SATA link down (SStatus 0 SControl 300) [ 1.969349] ata3.00: ATA-8: Hitachi HTS722016K9A300, DCDOC54P, max UDMA/133 [ 1.969356] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 1.970659] ata3.00: configured for UDMA/133 [ 1.970885] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72201 DCDO PQ: 0 ANSI: 5 [ 1.971108] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.971262] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.971450] sd 2:0:0:0: [sda] Write Protect is off [ 1.971454] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.971537] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.010657] sda: sda1 sda2 < sda5 > [ 2.011215] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.874547] Btrfs loaded [ 2.979065] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 41.194763] udevd[381]: starting version 173 [ 41.299354] Adding 6142972k swap on /dev/sda5. Priority:-1 extents:1 across:6142972k [ 41.424715] type=1400 audit(1373738272.090:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=520 comm="apparmor_parser" [ 41.472108] tg3 0000:09:00.0: irq 46 for MSI/MSI-X [ 41.506283] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.711665] device-mapper: multipath: version 1.3.0 loaded [ 41.732124] lp: driver loaded but no devices found [ 41.927558] wmi: Mapper loaded [ 42.059838] usbcore: registered new interface driver usbserial [ 42.059856] USB Serial support registered for generic [ 42.059875] usbcore: registered new interface driver usbserial_generic [ 42.059877] usbserial: USB Serial Driver core [ 42.067875] USB Serial support registered for Handspring Visor / Palm OS [ 42.067892] USB Serial support registered for Sony Clie 3.5 [ 42.067912] USB Serial support registered for Sony Clie 5.0 [ 42.067937] usbcore: registered new interface driver visor [ 42.067939] visor: USB HandSpring Visor / Palm OS driver [ 42.106725] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 42.156483] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 42.447223] cfg80211: Calling CRDA to update world regulatory domain [ 42.454019] cfg80211: World regulatory domain updated: [ 42.454023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 42.454027] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.454031] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.454034] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.454038] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.454041] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.525516] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 42.525651] r592: driver successfully loaded [ 42.582338] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 [ 42.599411] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 42.607160] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 42.607768] r852: driver loaded successfully [ 42.762650] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 42.762655] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 42.762731] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 42.762747] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 42.817236] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 42.817241] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 42.817399] iwl3945 0000:0c:00.0: irq 47 for MSI/MSI-X [ 42.818508] Registered led device: phy0-led [ 42.818604] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 42.912546] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 43.120468] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 43.275822] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 43.275899] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 43.275940] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 43.648314] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 43.648499] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 43.648653] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 43.648803] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 43.648950] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 43.649100] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 43.649256] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 44.218789] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 [ 44.290436] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.212930] input: AT Translated Set 2 keyboard+tsak as /devices/virtual/input/input15 [ 45.489221] ppdev: user-space parallel port driver [ 45.513392] type=1400 audit(1373738276.178:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1199 comm="apparmor_parser" [ 45.514833] type=1400 audit(1373738276.178:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1199 comm="apparmor_parser" [ 45.897119] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [ 46.817947] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [ 163.621380] NET: Registered protocol family 15 [ 173.649153] type=1400 audit(1373738404.311:5): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=2179 comm="apparmor_parser" [ 173.651160] type=1400 audit(1373738404.311:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=2181 comm="apparmor_parser" [ 173.651685] type=1400 audit(1373738404.311:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=2181 comm="apparmor_parser" [ 173.655946] type=1400 audit(1373738404.315:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2182 comm="apparmor_parser" [ 173.656689] type=1400 audit(1373738404.319:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2182 comm="apparmor_parser" [ 173.657118] type=1400 audit(1373738404.319:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=2179 comm="apparmor_parser" [ 173.659962] type=1400 audit(1373738404.319:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=2183 comm="apparmor_parser" [ 173.661650] type=1400 audit(1373738404.323:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=2179 comm="apparmor_parser" [ 173.663299] type=1400 audit(1373738404.323:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=2184 comm="apparmor_parser" [ 174.760724] init: apport pre-start process (2244) terminated with status 1 [ 174.761765] init: alsa-restore main process (2250) terminated with status 99 [ 174.763592] apm: BIOS not found. [ 174.782369] init: apport post-stop process (2272) terminated with status 1 +++++++++++++++++++++++++++++++++++++++++++++ -- Patricia J. Hawkins

1 1

Broken installation
by ant 08 Jul '13

08 Jul '13

Help! Following what I thought was a routine upgrade of my Debian Jessie/Sid system, Trinity has broken. Completely. Many programs have disappeared from /opt/trinity/bin (most particularly kmail - I'm writing this on an old backup system). In an attempt to recover this, I have (I believe) downgraded the system to Wheezy with the following /etc/apt/sources.list ------ deb http://ftp.nz.debian.org/debian/ wheezy main non-free contrib deb-src http://ftp.nz.debian.org/debian/ wheezy main non-free contrib deb http://security.debian.org/ wheezy/updates main contrib non-free deb-src http://security.debian.org/ wheezy/updates main contrib non-free ### I tried both this set and the ones below deb http://ppa.quickbuild.pearsoncomputing.net/slavek-banko/axis/ubuntu wheezy main deb-src http://ppa.quickbuild.pearsoncomputing.net/slavek-banko/axis/ubuntu wheezy main ##deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main ##deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main ##deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy main ##deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy main ------- After that, apt-get install desktop-base-trinity appears to work. But apt-get install kde-trinity gives: ----- The following packages have unmet dependencies: kde-trinity : Depends: kde-core-trinity (>= 5:47) but it is not going to be installed Depends: kdeaddons-trinity (>= 4:3.5.5) but it is not going to be installed Depends: kdegraphics-trinity (>= 4:3.5.5) but it is not going to be installed Depends: kdepim-trinity (>= 4:3.5.5) but it is not going to be installed Depends: kdeutils-trinity (>= 4:3.5.5) but it is not going to be installed E: Unable to correct problems, you have held broken packages. ----- Several questions: What have I done wrong?! All suggestions welcome... I tried to follow the instructions at http://www.trinitydesktop.org/wiki/bin/view/Documentation/DebianBinaryInsta… Are they actually correct? Has anyone else succeeded in a new or upgraded installation in the last couple of days? cheers anthony -- Sent from my linux system running Debian 8, desktop trinity-KDE. This email is plain text, not HTML. Any attachments are either .jpeg or .pdf

4 5

generate my own keyboard layout (hebrew)
by Uwe Brauer 06 Jul '13

06 Jul '13

Hello I am using periodically the hebrew-phonetic keyboard, but I would like to change its setting. How can I do that and where can I find documentation? thanks Uwe Brauer

1 0

taskbar icons disappeared
by David N Melik 05 Jul '13

05 Jul '13

I am running TDE R14.0.0. Recently, I configured the panel (I think it was just positioning at the middle, doing transparency--which did not work--and choosing the display style and taskbar grouping,) and my taskbar icons disappeared. I changed around the things I had changed many times, and 'show icons' was selected (except a few times turning it off and on to see if that worked)... but they will not come back. If anyone has a solution, it would be good to CC the message to my e-address, because I do not use Gmane much right now, rather than Usenet.

1 0

BADSIG, 404?
by Peter Laws 03 Jul '13

03 Jul '13

Apologies if this has been answered recently, but I'm getting several errors while trying to update. I was getting BADSIG errors, but those seem to be gone and "apt-get update" completes, but now "apt-get dist-upgrade" fails with 404s: Err http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/ubuntu/ precise/main kubuntu-default-settings-trinity all 4:3.5.13.2-0ubuntu12.04.0+0 404 Not Found etc, etc. If I put that URL into FF, I get to a mirror, so that part seems to be working. Maybe a mirror out of sync? -- Peter Laws / N5UWY National Weather Center / Network Operations Center University of Oklahoma Information Technology plaws(a)ou.edu College of Architecture, Regional and City Planning, MRCP '16 -------------------------------------------------------------------------- Feedback? Contact my director, Matt Younkins, younkinsm(a)ou.edu. Thank you!

3 4

Print preview problem
by ant 03 Jul '13

03 Jul '13

We have two machines running TDE, one 64-bit and one 32-bit, both with 3.5.13.2 on Debian Jessie/Sid. On the 32-bit one, print preview fails with "Preview failed: unable to start program Postscript Info" This is on (for example) kmail or kpdf. On the 64-bit one, no problems. Any suggestions? ---------- 32-bit one --------------- cat /etc/apt/sources.list ... deb http://ppa.quickbuild.pearsoncomputing.net/slavek-banko/axis/ubuntu wheezy main ... cat /etc/debian_version jessie/sid cheers anthony -- Sent from my linux system running Debian 8, desktop trinity-KDE. This email is plain text, not HTML. Any attachments are either .jpeg or .pdf

1 0

Wheezy build
by Curt Howland 01 Jul '13

01 Jul '13

Well, happiness, the Wheezy build has made it! One error, however, W: GPG error: http://ppa.quickbuild.pearsoncomputing.net wheezy Release: The following signatures were invalid: BADSIG 43F1DC4F2B8638D0 QuickBuild Trinity Desktop Environment I made sure to follow the add-key instructions, but the key said "no change" when it was updated. Just FYI, Curt-

2 2

R: kmail error pop3
by sacarde＠libero.it 30 Jun '13

30 Jun '13

is there a way to know more about this error? a verbose kmail log? another log in /var/log... ? thanks sacarde >----Messaggio originale---- >Da: sacarde(a)libero.it >Data: 29/06/2013 11.59 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: R: kmail error pop3 > >I add some informations: > >- with account imap kmail works OK > >- may be a dbus problem? > > > > >thanks > >>----Messaggio originale---- >>Da: sacarde(a)libero.it >>Data: 27/06/2013 9.37 >>A: <trinity-users(a)lists.pearsoncomputing.net> >>Ogg: kmail error pop3 >> >>hi, >> I try to migrate kmail from a system with kdemod3 to tde-kmail >>I copy: >>configuration file (to ~/.trinity/share/config/kmailrc) >>application dir (to ~/.trinity/share/apps/kmail) >> >>but when I start tde-kmail I have error: >> >> >>"could not start process pop3" >> >> >>can you help me? >> >> >> >> >> >>sacarde >> > >

1 0

Re: [trinity-users] Can't reach Mageia 3 repos
by Thierry de Coulon 29 Jun '13

29 Jun '13

On Saturday 29 June 2013 19.34:50 François Andriot wrote: > Hello, > the mirrors are still not synchronized. > There is nothing you can do but wait (I do not know how long). > > Francois No problem, I can wait :) Thank you for the confirmation. Thierry

1 0

Can't reach Mageia 3 repos
by Thierry de Coulon 29 Jun '13

29 Jun '13

Hi all, I gave a try to Mageia 3 today, and wanted to install Trinity Desktop, following the instructions given. However it does not work. When setting up the repositories I get: Retrieving failes : curl failed : exited with 22 no metedata found for medium I tried to check the given url but get: You don't have permission to access Does this mean the Mageia 3 repositories are not yet online, or am I doing something wrong? Regards, Thierry

2 1

R: kmail error pop3
by sacarde＠libero.it 29 Jun '13

29 Jun '13

I add some informations: - with account imap kmail works OK - may be a dbus problem? thanks >----Messaggio originale---- >Da: sacarde(a)libero.it >Data: 27/06/2013 9.37 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: kmail error pop3 > >hi, > I try to migrate kmail from a system with kdemod3 to tde-kmail >I copy: >configuration file (to ~/.trinity/share/config/kmailrc) >application dir (to ~/.trinity/share/apps/kmail) > >but when I start tde-kmail I have error: > > >"could not start process pop3" > > >can you help me? > > > > > >sacarde >

1 0

R: icons problem
by sacarde＠libero.it 29 Jun '13

29 Jun '13

I solve installing packages: libpng12 and libpng14 thanks >----Messaggio originale---- >Da: sacarde(a)libero.it >Data: 26/06/2013 11.53 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: icons problem > >hi, > I install tde-3.5.13 on my archlinux64 >with some other kde4 packages >I use kmail from tde-tdepim >but I don view any icons... > >http://digilander.libero.it/sacarde/np/kmail3.png > >can you help me? > > > > >thank you > > > >sacarde >

1 0

kmail error pop3
by sacarde＠libero.it 27 Jun '13

27 Jun '13

hi, I try to migrate kmail from a system with kdemod3 to tde-kmail I copy: configuration file (to ~/.trinity/share/config/kmailrc) application dir (to ~/.trinity/share/apps/kmail) but when I start tde-kmail I have error: "could not start process pop3" can you help me? sacarde

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users