Dear all,
I have recently set up KMail to fetch a GMail account over IMAP protocol. However, I am
experiencing an issue that does not happen with any of my other IMAP accounts. Very often when I
fetch new email and mark it as read locally, the next time emails are fetched this mail is
locally marked as unread, instead of being marked as read on the server. Is any of you
experiencing similar issues with GMail? Is this just a matter of setting appropriate options in
GMail and, if so, which ones?
Janek
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez pomyłkę
prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or if you have received this message in error,
please notify the sender and delete it from your system.
Was 5760x1024 (3 "HD" displays). New W/S is 5120x1440 on two displays.
LOVE the resolution ... but ... my eyes are old (they saw Armstrong
and Aldrin walk on the Moon on live TV when they were younger, for
instance) ... so how do I, in one step (I hope!) make everything on my
displays bigger? Is that even doable? It is in that Microsoft OS
(you select a percentage above or below 100% and everything gets
scaled).
--
Peter Laws, BS, MRCP / N5UWY
National Weather Center / Network Operations Center
University of Oklahoma Information Technology
plaws(a)ou.edu
New Dell T5810 with above card. Put Centos 7 on it (after finding the
"use a basic video driver" selection under "Troubleshooting"). Got
TDE v.newest installed just fine (after reading all steps in the
directions - sad considering I'd done this before ...).
But how do I adjust the video? The stuff in RandR only seems to want
to give me 1024x768 which seems ... skimpy ... on a pair of P2416Ds
which are 2560x1440 each (I've not connected the 2nd display yet).
What am I missing? Do I need to ditch the Nouveau stuff and go for
some sort of proprietary driver? I'm not opposed to either direction,
but I really have to have better than 1995's idea of hi-res. :-)
Or is there a tool I'm missing?
--
Peter Laws, BS, MRCP / N5UWY
National Weather Center / Network Operations Center
University of Oklahoma Information Technology
plaws(a)ou.edu
Hello,
Since I upgraded my Debian from Jessie to Stretch,
I cannot create a hard disk icon.
Right click on the desktop, "create a new icon", "to a peripheral",
"hard disk" (in /etc/fstab), OK, the icon is created.
When I click on this new icon I receive this text :
[Desktop Entry]
Dev=UUID=f9cafbc8-5b78-4b8a-9e5f-f50697ab33f4
Icon=drive-harddisk-mounted
MountPoint=/media/sdb1
ReadOnly=false
Type=FSDevice
UnmountIcon=drive-harddisk
What happens ?
Thank for a help.
André
Hi all,
I'm trying to add GPG key for preliminary stable builds server but I get a timeout error:
# apt-key adv --keyserver keys.gnupg.net --recv-key A04BE668
Executing:
gpg --ignore-time-conflict --no-options --no-default-keyring --homedir /tmp/tmp.WPQPbWCxI4 --no-auto-check-trustdb --trust-model
always --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg --keyring /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg --keyserver
keys.gnupg.net --recv-key A04BE668
gpg: requesting key A04BE668 from hkp server keys.gnupg.net
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error
Is it the servers fault or did the GPG signature for Trinity servers changed but wasn't updated on
the web page [1]?
Janek
[1] https://wiki.trinitydesktop.org/Preliminary_Stable_Builds#Debian
---
Politechnika Łódzka
Lodz University of Technology
Treść tej wiadomości zawiera informacje przeznaczone tylko dla adresata.
Jeżeli nie jesteście Państwo jej adresatem, bądź otrzymaliście ją przez pomyłkę
prosimy o powiadomienie o tym nadawcy oraz trwałe jej usunięcie.
This email contains information intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or if you have received this message in error,
please notify the sender and delete it from your system.
Hi there.
I checked for updates in Synaptic and saw a slew of preliminary stable
updates.
It didn't occur to me that running a Trinity update inside of Trinity
might be a bad idea.
That is, until my desktop disappeared.
I did a pstree check to see if the update had finished, which it had,
probably because Synaptic was killed.
Now there is no record of the updates in Synaptics history and the
updates are no longer present - did it succeed?
Just a heads up!
P.S. should I do anything to try to recover the update history?
Do I need to be worried?
Regards,
Philip Ashmore
New hardware and new install. Ryzen 1600, ASUS B350 Prime Plus, BIOS
0803, Ubuntu 16.04 with kernel-4.10.0-041000-lowlatency, and of course
TDE R14.0.4 and it does dual boot into Win 10, but I seriously,
_seriously_ hate Win10 after using XP
Aggravating issues, about Trinity but I keep plugging on. I won't file
bug reports , because of all of NEW HARDWARE issues. I'm mainly just
looking for confirmation of these problems.
1. Trinity Control Center / Monitor & Display when Brightness and
Gamma are changed, It does not save the settings beyond the current
session, even when logged in as root. When you log out, the background
on the TDM login screen even shows the settings returned to default.
(System file permissions somewhere?)
2. When I logout, any active Konsole windows that were open are not
saved and all setting are lost. ( again, System file Permissions ?) once
in a while, when saving the desktop on logout, an error message will
popup but closes so fast ya can't read it.
3. System Guard Network sensors are dead (bug 2398) probably brought on
by Systemd changes of hardware naming.( no more eth0, wlan0)
4. Network Icon in system Tray used to show connect speed or wifi signal
strength text, gone. (Could be one my settings)
One odd one, I had to change permissions on /sys to 775 along with sub
directories. I think it had to do with SCP. that was 2 weeks ago. so I'm
not real sure of this one.
There are a few other issues, but I think they belong to AMD, ASUS and
BIOS. (such as Xorg using so much processor power, and not knowing if
this setup is using all of the cores)
Because of the NEW hardware and this being the first time with R14.0.4
version, I don't know if prior versions of Trinity have these problems.
I've been using Trinity since Tim started the project, so I'm not new to
this debug fight process. Does trinity and it's apps have log files to
look at? I can only find a tdm.log
I've loaded Xubuntu on a different partition, but has it's own issues
without Trinity loaded. If I get it to run with fewer lockup issues
(kernel), I'll try an older version of Trinity after I check Xorg
processor usage.
Dave
Hi there.
I started Arduino and got a crash in gtk-qt-engine
(splash.png-gtk-tqt-application).
I just tried to upload a crash report but the upload failed with this
message:
Your crash report failed to upload!
Please check your network settings and try again.
The server responded:
Invalid proof of work
This server requires a SHA1 difficulty of 14 to accept anonymous crash
reports
I'm using the preliminary stable build on Stretch.
Regards,
Philip Ashmore
