tde-users

users@trinitydesktop.org

8 participants
4293 discussions

External mike not working on Dell laptop
by Patricia J. Hawkins 13 Jul '13

13 Jul '13

Hi, I have a HDA Intel soundcard in a Dell Inspiron 1420. Output sound is currently fine, even Timidity is working seamlessly. However, input sound using the front mike-jack isn't working (there is no built-in mike). This used to work (took some blood, sweat, tears, pulseaudio eradication and alsa-base.conf in the past) I haven't used the external mike for some time (got a smartphone, stopped using Skype) so don't know when it stopped working. I've tested the microphone I'm using on another computer, it's fine. Help? Here are today's running notes, followed by my last dmesg: <2013-07-13 Sat> Sound working beautifully except for mike in; static recorded when I try w/ a mike plugged in, using krec. Fiddling with mixer settings can also record NO static. Goody. Looking at: https://wiki.ubuntu.com/SndHdaIntelSoundProblems lsmod shows snd_hda_intel being used. lspci 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) cat /proc/asound/card*/codec\#*|grep -i codec Codec: SigmaTel STAC9228 Codec: Conexant ID 2c06 ---- The following alsa commands no longer work, and couldn't immediately figure out how to do this as a service, /etc/init.d/alsa-utils stop rmmod snd_hda_intel modprobe snd-hda-intel /etc/init.d/alsa-utils start so I tried stopping sound from MainMenu->System Settings->Sound and got: "ERROR: Module snd_hda_intel is in use" so apparently didn't really stop ALSA. Bottom of /etc/alsa-base.conf had: -- options snd-hda-intel power_save=10 power_save_controller=N options snd-hda-intel model=5stack -- changed to: options snd-hda-intel model=5stack power_save=10 power_save_controller=N and then: options snd-hda-intel model=3stack power_save=10 power_save_controller=N (reasoning that 3stack USED to be the magic incantation, then quit working, then it was 5stack...) output sound kept working just fine, as did the mixer, but didn't fix the mike problem. ++++++++++++++ dmesg ++++++++++++++++++++++++ [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-32-generic-pae (buildd@aatxe) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #51-Ubuntu SMP Thu Mar 21 16:09:48 UTC 2013 (Ubuntu 3.0.0-32.51-generic-pae 3.0.69) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Dell Inc. Inspiron 1420 /0DT492, BIOS A09 07/11/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 0DF800000 mask FFF800000 uncachable [ 0.000000] 5 base 0DF700000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 3576MB, range: 8MB, type UC [ 0.000000] reg 5, base: 3575MB, range: 1MB, type UC [ 0.000000] total RAM covered: 7671M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3575MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3576MB, range: 8MB, type UC [ 0.000000] reg 3, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] e820 update range: 00000000df700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: 35a6c000 - 36d2e000 [ 0.000000] ACPI: RSDP 000fbbf0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT df66f200 00054 (v01 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: FACP df66f09c 000F4 (v04 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: DSDT df66f800 05676 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS df67e000 00040 [ 0.000000] ACPI: HPET df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC df66f400 00068 (v01 DELL M08 27D8070B ASL 00000047) [ 0.000000] ACPI: MCFG df66f3c0 0003E (v16 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: BOOT df66efc0 00028 (v01 DELL M08 27D8070B ASL 00000061) [ 0.000000] ACPI: SSDT df66d9fa 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3716MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1046012 [ 0.000000] free_area_init_node: node 0, pgdat c17ff100, node_mem_map f366c200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7433 pages used for memmap [ 0.000000] HighMem zone: 810342 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f7bd1000 s29952 r0 d23296 u53248 [ 0.000000] pcpu-alloc: s29952 r0 d23296 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1036795 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-32-generic-pae root=UUID=71041dd2-a8b7-4360-a399-c3c719228b29 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 18874112 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00120000) [ 0.000000] Memory: 4098648k/4718592k available (5549k kernel code, 85400k reserved, 2684k data, 724k init, 3271100k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc180b000 - 0xc18c0000 ( 724 kB) [ 0.000000] .data : 0xc156b5fc - 0xc180a600 (2684 kB) [ 0.000000] .text : 0xc1000000 - 0xc156b5fc (5549 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.493 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.98 BogoMIPS (lpj=7181972) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004034] Security Framework initialized [ 0.004052] AppArmor: AppArmor initialized [ 0.004054] Yama: becoming mindful. [ 0.004119] Mount-cache hash table entries: 512 [ 0.004270] Initializing cgroup subsys cpuacct [ 0.004277] Initializing cgroup subsys memory [ 0.004286] Initializing cgroup subsys devices [ 0.004289] Initializing cgroup subsys freezer [ 0.004291] Initializing cgroup subsys net_cls [ 0.004294] Initializing cgroup subsys blkio [ 0.004302] Initializing cgroup subsys perf_event [ 0.004339] CPU: Physical Processor ID: 0 [ 0.004341] CPU: Processor Core ID: 0 [ 0.004345] mce: CPU supports 6 MCE banks [ 0.004356] CPU0: Thermal monitoring enabled (TM2) [ 0.004360] using mwait in idle threads. [ 0.009511] ACPI: Core revision 20110413 [ 0.014934] ftrace: allocating 25262 entries in 50 pages [ 0.016057] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016530] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059692] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.060003] PEBS disabled due to CPU errata. [ 0.060003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] CPU 1 irqstacks, hard=f74ca000 soft=f74cc000 [ 0.060003] Booting Node 0, Processors #1 Ok. [ 0.060003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.148024] Brought up 2 CPUs [ 0.148027] Total of 2 processors activated (7181.96 BogoMIPS). [ 0.149092] devtmpfs: initialized [ 0.150354] print_constraints: dummy: [ 0.150390] Time: 17:57:10 Date: 07/13/13 [ 0.150440] NET: Registered protocol family 16 [ 0.150476] Trying to unpack rootfs image as initramfs... [ 0.152048] EISA bus registered [ 0.152067] ACPI: bus type pci registered [ 0.152142] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.152146] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.152148] PCI: Using MMCONFIG for extended config space [ 0.152151] PCI: Using configuration type 1 for base access [ 0.152159] dmi type 0xB1 record - unknown flag [ 0.153482] bio: create slab <bio-0> at 0 [ 0.155239] ACPI: EC: Look up EC in DSDT [ 0.166672] ACPI: SSDT df66e530 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.167088] ACPI: Dynamic OEM Table Load: [ 0.167093] ACPI: SSDT (null) 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.167260] ACPI: SSDT df66dec6 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.167650] ACPI: Dynamic OEM Table Load: [ 0.167654] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.167943] ACPI: SSDT df66e774 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.168356] ACPI: Dynamic OEM Table Load: [ 0.168360] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.168475] ACPI: SSDT df66e4ab 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.168867] ACPI: Dynamic OEM Table Load: [ 0.168871] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.169122] ACPI: Interpreter enabled [ 0.169131] ACPI: (supports S0 S3 S4 S5) [ 0.169154] ACPI: Using IOAPIC for interrupt routing [ 0.205966] ACPI: No dock devices found. [ 0.205970] HEST: Table not found. [ 0.205977] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.216186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.236519] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.236524] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.236527] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.236531] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.236534] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.236537] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.236541] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.236544] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.236547] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.236550] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.236554] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.236557] pci_root PNP0A03:00: host bridge window [mem 0xffb00000-0xffefffff] [ 0.236560] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.236585] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.236647] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.236665] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.236676] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.236684] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.236733] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.236748] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] [ 0.236857] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.236922] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.236971] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.237036] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.237104] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.237133] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.237255] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.237262] pci 0000:00:1a.7: PME# disabled [ 0.237296] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.237322] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.237442] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.237448] pci 0000:00:1b.0: PME# disabled [ 0.237481] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.237610] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.237616] pci 0000:00:1c.0: PME# disabled [ 0.237652] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.237779] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.237785] pci 0000:00:1c.1: PME# disabled [ 0.237823] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604 [ 0.237951] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.237957] pci 0000:00:1c.3: PME# disabled [ 0.237999] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604 [ 0.238126] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.238132] pci 0000:00:1c.5: PME# disabled [ 0.238166] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.238231] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.238280] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.238345] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.238394] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.238459] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.238524] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.238552] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.238674] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.238681] pci 0000:00:1d.7: PME# disabled [ 0.238708] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.238820] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.238946] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.238953] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.238959] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.238967] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.239033] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.239052] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.239066] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.239081] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.239095] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.239110] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.239173] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.239205] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.239219] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.239233] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.239247] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.239261] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.239276] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] [ 0.239352] pci 0000:00:1f.2: PME# supported from D3hot [ 0.239358] pci 0000:00:1f.2: PME# disabled [ 0.239383] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.239403] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] [ 0.239451] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.239568] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.239575] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.239582] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.239592] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.239765] pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280 [ 0.239825] pci 0000:0c:00.0: reg 10: [mem 0xfe8ff000-0xfe8fffff] [ 0.240270] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.240285] pci 0000:0c:00.0: PME# disabled [ 0.240359] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.240401] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.240408] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.240414] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.240424] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.240494] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.240500] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.240507] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.240517] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.240663] pci 0000:09:00.0: [14e4:1713] type 0 class 0x000200 [ 0.240737] pci 0000:09:00.0: reg 10: [mem 0xfe5f0000-0xfe5fffff 64bit] [ 0.241181] pci 0000:09:00.0: PME# supported from D3hot D3cold [ 0.241194] pci 0000:09:00.0: PME# disabled [ 0.241338] pci 0000:00:1c.5: PCI bridge to [bus 09-09] [ 0.241344] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) [ 0.241351] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.241360] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.241416] pci 0000:03:01.0: [1180:0832] type 0 class 0x000c00 [ 0.241445] pci 0000:03:01.0: reg 10: [mem 0xfe4ff800-0xfe4fffff] [ 0.241561] pci 0000:03:01.0: supports D1 D2 [ 0.241564] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241570] pci 0000:03:01.0: PME# disabled [ 0.241595] pci 0000:03:01.1: [1180:0822] type 0 class 0x000805 [ 0.241621] pci 0000:03:01.1: reg 10: [mem 0xfe4ff500-0xfe4ff5ff] [ 0.241735] pci 0000:03:01.1: supports D1 D2 [ 0.241737] pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241744] pci 0000:03:01.1: PME# disabled [ 0.241769] pci 0000:03:01.2: [1180:0592] type 0 class 0x000880 [ 0.241795] pci 0000:03:01.2: reg 10: [mem 0xfe4ff600-0xfe4ff6ff] [ 0.241911] pci 0000:03:01.2: supports D1 D2 [ 0.241914] pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.241920] pci 0000:03:01.2: PME# disabled [ 0.241945] pci 0000:03:01.3: [1180:0852] type 0 class 0x000880 [ 0.241970] pci 0000:03:01.3: reg 10: [mem 0xfe4ff700-0xfe4ff7ff] [ 0.242084] pci 0000:03:01.3: supports D1 D2 [ 0.242086] pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.242093] pci 0000:03:01.3: PME# disabled [ 0.242174] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.242181] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.242188] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.242197] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.242201] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.242205] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.242208] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.242212] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.242215] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.242219] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.242222] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.242226] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.242229] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.242233] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.242236] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.242240] pci 0000:00:1e.0: bridge window [mem 0xffb00000-0xffefffff] (subtractive decode) [ 0.242243] pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) [ 0.242281] pci_bus 0000:00: on NUMA node 0 [ 0.242288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.242650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.242798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.242865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.242934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.243002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.243067] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.243072] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.243074] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.256264] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.256355] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.256443] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 0.256531] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 0.256619] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.256711] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.256803] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.256881] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.257037] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.257061] vgaarb: loaded [ 0.257063] vgaarb: bridge control possible 0000:00:02.0 [ 0.257336] SCSI subsystem initialized [ 0.257412] libata version 3.00 loaded. [ 0.257475] usbcore: registered new interface driver usbfs [ 0.257490] usbcore: registered new interface driver hub [ 0.257528] usbcore: registered new device driver usb [ 0.257644] PCI: Using ACPI for IRQ routing [ 0.260445] PCI: pci_cache_line_size set to 64 bytes [ 0.260610] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.260614] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff [ 0.260746] NetLabel: Initializing [ 0.260749] NetLabel: domain hash size = 128 [ 0.260751] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.260764] NetLabel: unlabeled traffic allowed by default [ 0.260814] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.260822] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.260828] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.264187] Switching to clocksource hpet [ 0.267397] Switched to NOHz mode on CPU #0 [ 0.267445] Switched to NOHz mode on CPU #1 [ 0.273656] AppArmor: AppArmor Filesystem Enabled [ 0.273704] pnp: PnP ACPI init [ 0.273726] ACPI: bus type pnp registered [ 0.283929] pnp 00:00: [bus 00-ff] [ 0.283934] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.283937] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.283940] pnp 00:00: [io 0x0d00-0xffff window] [ 0.283944] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.283947] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.283950] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.283953] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.283956] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.283959] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.283963] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.283966] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.283969] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.283972] pnp 00:00: [mem 0xffb00000-0xffefffff window] [ 0.283975] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.284106] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.284142] pnp 00:01: [irq 12] [ 0.284174] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.284195] pnp 00:02: [io 0x0060] [ 0.284198] pnp 00:02: [io 0x0064] [ 0.284200] pnp 00:02: [io 0x0062] [ 0.284203] pnp 00:02: [io 0x0066] [ 0.284210] pnp 00:02: [irq 1] [ 0.284241] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.284261] pnp 00:03: [io 0x0070-0x0071] [ 0.284268] pnp 00:03: [irq 8] [ 0.284270] pnp 00:03: [io 0x0072-0x0077] [ 0.284302] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.284324] pnp 00:04: [io 0x0061] [ 0.284327] pnp 00:04: [io 0x0063] [ 0.284329] pnp 00:04: [io 0x0065] [ 0.284332] pnp 00:04: [io 0x0067] [ 0.284364] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.284383] pnp 00:05: [io 0x0c80-0x0cff] [ 0.284463] system 00:05: [io 0x0c80-0x0cff] could not be reserved [ 0.284468] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.284492] pnp 00:06: [dma 4] [ 0.284495] pnp 00:06: [io 0x0000-0x000f] [ 0.284498] pnp 00:06: [io 0x0080-0x0085] [ 0.284500] pnp 00:06: [io 0x0087-0x008f] [ 0.284503] pnp 00:06: [io 0x00c0-0x00df] [ 0.284506] pnp 00:06: [io 0x0010-0x001f] [ 0.284508] pnp 00:06: [io 0x0090-0x0091] [ 0.284511] pnp 00:06: [io 0x0093-0x009f] [ 0.284545] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.284564] pnp 00:07: [io 0x00f0-0x00ff] [ 0.284571] pnp 00:07: [irq 13] [ 0.284606] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.284655] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.284720] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.284725] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.284913] pnp 00:09: [io 0x0900-0x097f] [ 0.284916] pnp 00:09: [io 0x0092] [ 0.284918] pnp 00:09: [io 0x00b2-0x00b3] [ 0.284921] pnp 00:09: [io 0x0020-0x0021] [ 0.284927] pnp 00:09: [io 0x00a0-0x00a1] [ 0.284929] pnp 00:09: [irq 0 disabled] [ 0.284932] pnp 00:09: [io 0x04d0-0x04d1] [ 0.284935] pnp 00:09: [io 0x1000-0x1005] [ 0.284938] pnp 00:09: [io 0x1008-0x100f] [ 0.284961] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.284966] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285045] system 00:09: [io 0x0900-0x097f] has been reserved [ 0.285049] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.285053] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.285074] pnp 00:0a: [io 0xf400-0xf4fe] [ 0.285077] pnp 00:0a: [io 0x0086] [ 0.285080] pnp 00:0a: [io 0x1006-0x1007] [ 0.285083] pnp 00:0a: [io 0x100a-0x1059] [ 0.285085] pnp 00:0a: [io 0x1060-0x107f] [ 0.285088] pnp 00:0a: [io 0x1080-0x10bf] [ 0.285090] pnp 00:0a: [io 0x10c0-0x10df] [ 0.285093] pnp 00:0a: [io 0x1010-0x102f] [ 0.285096] pnp 00:0a: [io 0x0809] [ 0.285119] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285123] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285127] pnp 00:0a: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285131] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.285207] system 00:0a: [io 0xf400-0xf4fe] has been reserved [ 0.285211] system 00:0a: [io 0x1080-0x10bf] has been reserved [ 0.285215] system 00:0a: [io 0x10c0-0x10df] has been reserved [ 0.285218] system 00:0a: [io 0x0809] has been reserved [ 0.285223] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.297720] pnp 00:0b: [mem 0x00000000-0x0009efff] [ 0.297724] pnp 00:0b: [mem 0x0009f000-0x0009ffff] [ 0.297727] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.297730] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.297733] pnp 00:0b: [mem 0x00100000-0xdf66d7ff] [ 0.297736] pnp 00:0b: [mem 0xdf66d800-0xdf6fffff] [ 0.297738] pnp 00:0b: [mem 0xdf700000-0xdf7fffff] [ 0.297741] pnp 00:0b: [mem 0xdf700000-0xdfefffff] [ 0.297744] pnp 00:0b: [mem 0xfff00000-0xffffffff] [ 0.297747] pnp 00:0b: [mem 0xffa00000-0xffafffff] [ 0.297749] pnp 00:0b: [mem 0xfec00000-0xfec0ffff] [ 0.297752] pnp 00:0b: [mem 0xfee00000-0xfee0ffff] [ 0.297755] pnp 00:0b: [mem 0xfed20000-0xfed8ffff] [ 0.297757] pnp 00:0b: [mem 0xfeda0000-0xfeda3fff] [ 0.297760] pnp 00:0b: [mem 0xfeda4000-0xfeda4fff] [ 0.297763] pnp 00:0b: [mem 0xfeda5000-0xfeda5fff] [ 0.297765] pnp 00:0b: [mem 0xfeda6000-0xfeda6fff] [ 0.297768] pnp 00:0b: [mem 0xfed18000-0xfed1bfff] [ 0.297771] pnp 00:0b: [mem 0xf8000000-0xfbffffff] [ 0.297941] system 00:0b: [mem 0x00000000-0x0009efff] could not be reserved [ 0.297945] system 00:0b: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.297949] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.297953] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.297957] system 00:0b: [mem 0x00100000-0xdf66d7ff] could not be reserved [ 0.297961] system 00:0b: [mem 0xdf66d800-0xdf6fffff] has been reserved [ 0.297965] system 00:0b: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.297968] system 00:0b: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.297972] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved [ 0.297976] system 00:0b: [mem 0xffa00000-0xffafffff] has been reserved [ 0.297980] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.297984] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.297987] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.297991] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.297995] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.297998] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.298002] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.298006] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.298009] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.298014] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.298094] pnp: PnP ACPI: found 12 devices [ 0.298097] ACPI: ACPI bus type pnp unregistered [ 0.298101] PnPBIOS: Disabled by ACPI PNP [ 0.334681] PCI: max bus depth: 1 pci_try_num: 2 [ 0.334770] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.334776] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 0.334782] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.334787] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff] [ 0.334791] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0600000-0xf07fffff] [ 0.334796] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.334801] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.334805] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.334810] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.334818] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf07fffff] [ 0.334824] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.334834] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.334839] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.334846] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.334853] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.334863] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.334867] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.334875] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.334881] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.334891] pci 0000:00:1c.5: PCI bridge to [bus 09-09] [ 0.334895] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 0.334903] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff] [ 0.334910] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.334920] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.334922] pci 0000:00:1e.0: bridge window [io disabled] [ 0.334930] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff] [ 0.334936] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.334968] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.334975] pci 0000:00:1c.0: setting latency timer to 64 [ 0.334992] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.334998] pci 0000:00:1c.1: setting latency timer to 64 [ 0.335011] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.335018] pci 0000:00:1c.3: setting latency timer to 64 [ 0.335027] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.335033] pci 0000:00:1c.5: setting latency timer to 64 [ 0.335044] pci 0000:00:1e.0: setting latency timer to 64 [ 0.335049] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.335053] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.335056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.335059] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.335062] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.335065] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.335068] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.335071] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.335074] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.335077] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.335080] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.335083] pci_bus 0000:00: resource 15 [mem 0xffb00000-0xffefffff] [ 0.335087] pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] [ 0.335090] pci_bus 0000:0b: resource 0 [io 0x4000-0x4fff] [ 0.335093] pci_bus 0000:0b: resource 1 [mem 0xf0600000-0xf07fffff] [ 0.335096] pci_bus 0000:0b: resource 2 [mem 0xf0800000-0xf09fffff 64bit pref] [ 0.335099] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff] [ 0.335103] pci_bus 0000:0c: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.335106] pci_bus 0000:0c: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] [ 0.335109] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] [ 0.335112] pci_bus 0000:0d: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.335116] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.335119] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] [ 0.335122] pci_bus 0000:09: resource 1 [mem 0xfe500000-0xfe5fffff] [ 0.335125] pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] [ 0.335129] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff] [ 0.335132] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.335135] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.335138] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.335141] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.335145] pci_bus 0000:03: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.335148] pci_bus 0000:03: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.335151] pci_bus 0000:03: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.335154] pci_bus 0000:03: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.335157] pci_bus 0000:03: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.335160] pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.335163] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.335166] pci_bus 0000:03: resource 15 [mem 0xffb00000-0xffefffff] [ 0.335169] pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff] [ 0.335222] NET: Registered protocol family 2 [ 0.335311] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.335615] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.336115] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.336334] TCP: Hash tables configured (established 131072 bind 65536) [ 0.336337] TCP reno registered [ 0.336340] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.336351] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.336474] NET: Registered protocol family 1 [ 0.336494] pci 0000:00:02.0: Boot video device [ 0.336523] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.336547] pci 0000:00:1a.0: PCI INT A disabled [ 0.336562] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.336585] pci 0000:00:1a.1: PCI INT B disabled [ 0.336601] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.336639] pci 0000:00:1a.7: PCI INT C disabled [ 0.336665] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.336689] pci 0000:00:1d.0: PCI INT A disabled [ 0.336699] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.336723] pci 0000:00:1d.1: PCI INT B disabled [ 0.336732] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.336755] pci 0000:00:1d.2: PCI INT C disabled [ 0.336767] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.336787] pci 0000:00:1d.7: PCI INT A disabled [ 0.336835] PCI: CLS 64 bytes, default 64 [ 0.336843] Simple Boot Flag at 0x79 set to 0x1 [ 0.337239] audit: initializing netlink socket (disabled) [ 0.337249] type=2000 audit(1373738230.332:1): initialized [ 0.363396] highmem bounce pool size: 64 pages [ 0.363404] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.366414] VFS: Disk quotas dquot_6.5.2 [ 0.366495] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.367367] fuse init (API version 7.16) [ 0.367483] msgmni has been set to 1616 [ 0.367887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.367920] io scheduler noop registered [ 0.367923] io scheduler deadline registered [ 0.367940] io scheduler cfq registered (default) [ 0.368122] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.368195] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.368289] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.368352] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.368443] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.368506] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.368598] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.368661] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.368785] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.368815] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.368891] intel_idle: MWAIT substates: 0x22220 [ 0.368893] intel_idle: does not run on family 6 model 15 [ 0.368974] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.369037] ACPI: AC Adapter [AC] (on-line) [ 0.369126] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.369541] ACPI: Lid Switch [LID] [ 0.369594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.369600] ACPI: Power Button [PBTN] [ 0.369655] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.369659] ACPI: Sleep Button [SBTN] [ 0.369696] ACPI: acpi_idle registered with cpuidle [ 0.369863] Monitor-Mwait will be used to enter C-1 state [ 0.369874] Monitor-Mwait will be used to enter C-2 state [ 0.369882] Monitor-Mwait will be used to enter C-3 state [ 0.369887] Marking TSC unstable due to TSC halts in idle [ 0.376233] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.376236] ACPI: Thermal Zone [THM] (40 C) [ 0.376273] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.376325] ERST: Table is not found! [ 0.376429] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.392128] isapnp: Scanning for PnP cards... [ 0.493449] ACPI: Battery Slot [BAT0] (battery present) [ 0.720971] Freeing initrd memory: 19208k freed [ 0.755221] isapnp: No Plug & Play device found [ 0.774022] Linux agpgart interface v0.103 [ 0.774171] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 0.774267] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.774962] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.775096] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.776692] brd: module loaded [ 0.777434] loop: module loaded [ 0.777656] ata_piix 0000:00:1f.1: version 2.13 [ 0.777671] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.777716] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.778110] scsi0 : ata_piix [ 0.778221] scsi1 : ata_piix [ 0.778633] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.778637] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.778812] ata2: port disabled. ignoring. [ 0.779111] Fixed MDIO Bus: probed [ 0.779141] PPP generic driver version 2.4.2 [ 0.779188] tun: Universal TUN/TAP device driver, 1.6 [ 0.779190] tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com> [ 0.779304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.779323] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.779343] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.779348] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.779388] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.779423] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.783317] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.783336] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.796021] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.796163] hub 1-0:1.0: USB hub found [ 0.796168] hub 1-0:1.0: 4 ports detected [ 0.796263] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.796278] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.796283] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.796331] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.796362] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.800257] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.800275] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 0.816020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.816148] hub 2-0:1.0: USB hub found [ 0.816153] hub 2-0:1.0: 6 ports detected [ 0.816252] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.816270] uhci_hcd: USB Universal Host Controller Interface driver [ 0.816296] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.816306] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.816311] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.816355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.816386] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 0.816535] hub 3-0:1.0: USB hub found [ 0.816541] hub 3-0:1.0: 2 ports detected [ 0.816627] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.816637] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.816641] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.816683] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.816729] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 0.816883] hub 4-0:1.0: USB hub found [ 0.816888] hub 4-0:1.0: 2 ports detected [ 0.816974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.816984] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.816989] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.817029] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.817059] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 0.817210] hub 5-0:1.0: USB hub found [ 0.817215] hub 5-0:1.0: 2 ports detected [ 0.817299] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.817308] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.817313] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.817363] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.817393] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 0.817541] hub 6-0:1.0: USB hub found [ 0.817546] hub 6-0:1.0: 2 ports detected [ 0.817631] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.817641] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.817645] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.817687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.817717] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 0.817870] hub 7-0:1.0: USB hub found [ 0.817874] hub 7-0:1.0: 2 ports detected [ 0.818027] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.821191] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.821199] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.821332] mousedev: PS/2 mouse device common for all mice [ 0.821507] rtc_cmos 00:03: RTC can wake from S4 [ 0.821633] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.821681] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.821780] device-mapper: uevent: version 1.0.3 [ 0.821870] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel(a)redhat.com [ 0.821916] EISA: Probing bus 0 at eisa.0 [ 0.821918] EISA: Cannot allocate resource for mainboard [ 0.821921] Cannot allocate resource for EISA slot 1 [ 0.821924] Cannot allocate resource for EISA slot 2 [ 0.821926] Cannot allocate resource for EISA slot 3 [ 0.821929] Cannot allocate resource for EISA slot 4 [ 0.821931] Cannot allocate resource for EISA slot 5 [ 0.821933] Cannot allocate resource for EISA slot 6 [ 0.821936] Cannot allocate resource for EISA slot 7 [ 0.821938] Cannot allocate resource for EISA slot 8 [ 0.821940] EISA: Detected 0 cards. [ 0.821952] cpufreq-nforce2: No nForce2 chipset. [ 0.822030] cpuidle: using governor ladder [ 0.822161] cpuidle: using governor menu [ 0.822164] EFI Variables Facility v0.08 2004-May-17 [ 0.822549] TCP cubic registered [ 0.822726] NET: Registered protocol family 10 [ 0.823515] NET: Registered protocol family 17 [ 0.823533] Registering the dns_resolver key type [ 0.823560] Using IPI No-Shortcut mode [ 0.823656] PM: Hibernation image not present or could not be loaded. [ 0.823671] registered taskstats version 1 [ 0.824810] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.833323] Magic number: 5:229:997 [ 0.833436] rtc_cmos 00:03: setting system clock to 2013-07-13 17:57:11 UTC (1373738231) [ 0.834388] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.834390] EDD information not available. [ 0.940514] ata1.00: ATAPI: SONY CD-RW/DVD-ROM CRX880A, KD09, max UDMA/33 [ 0.956391] ata1.00: configured for UDMA/33 [ 0.957921] scsi 0:0:0:0: CD-ROM SONY CDRWDVD CRX880A KD09 PQ: 0 ANSI: 5 [ 0.961072] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.961076] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.961265] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.961332] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.961527] Freeing unused kernel memory: 724k freed [ 0.961880] Write protecting the kernel text: 5552k [ 0.962033] Write protecting the kernel read-only data: 2256k [ 0.962035] NX-protecting the kernel data: 4688k [ 0.984901] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 0.985201] zram: num_devices not specified. Using default: 1 [ 0.985204] zram: Creating 1 devices ... [ 0.989812] udevd[92]: starting version 173 [ 1.059503] tg3.c:v3.119 (May 18, 2011) [ 1.059533] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.059552] tg3 0000:09:00.0: setting latency timer to 64 [ 1.060763] [drm] Initialized drm 1.1.0 20060810 [ 1.111386] Adding 2059288k swap on /dev/zram0. Priority:100 extents:1 across:2059288k SS [ 1.123676] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.123683] i915 0000:00:02.0: setting latency timer to 64 [ 1.140524] firewire_ohci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.158121] sdhci: Secure Digital Host Controller Interface driver [ 1.158125] sdhci: Copyright(c) Pierre Ossman [ 1.162863] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1a:a0:fe:24:1e [ 1.162869] tg3 0000:09:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0]) [ 1.162873] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0] [ 1.162877] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.164286] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.164290] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.164767] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 1.164774] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.164776] [drm] Driver supports precise vblank timestamp query. [ 1.164829] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.208240] firewire_ohci: Added fw-ohci device 0000:03:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 1.208316] sdhci-pci 0000:03:01.1: SDHCI controller found [1180:0822] (rev 22) [ 1.208342] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 1.209393] mmc0: no vmmc regulator found [ 1.210424] Registered led device: mmc0:: [ 1.211709] mmc0: SDHCI controller on PCI [0000:03:01.1] using DMA [ 1.472959] [drm] initialized overlay support [ 1.621840] fbcon: inteldrmfb (fb0) is primary device [ 1.621901] Console: switching to colour frame buffer device 180x56 [ 1.621943] fb0: inteldrmfb frame buffer device [ 1.621945] drm: registered panic notifier [ 1.634217] acpi device:34: registered as cooling_device2 [ 1.634542] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input4 [ 1.634591] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 1.634612] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 1.634652] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.634821] ahci 0000:00:1f.2: version 3.0 [ 1.634838] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.634900] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.634979] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.634984] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.634991] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.644624] scsi2 : ahci [ 1.644759] scsi3 : ahci [ 1.644857] scsi4 : ahci [ 1.645060] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 45 [ 1.645063] ata4: DUMMY [ 1.645067] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 45 [ 1.708240] firewire_core: created device fw0: GUID 384fc0000317bd81, S400 [ 1.968242] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.968274] ata5: SATA link down (SStatus 0 SControl 300) [ 1.969349] ata3.00: ATA-8: Hitachi HTS722016K9A300, DCDOC54P, max UDMA/133 [ 1.969356] ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 1.970659] ata3.00: configured for UDMA/133 [ 1.970885] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72201 DCDO PQ: 0 ANSI: 5 [ 1.971108] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.971262] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.971450] sd 2:0:0:0: [sda] Write Protect is off [ 1.971454] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.971537] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.010657] sda: sda1 sda2 < sda5 > [ 2.011215] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.874547] Btrfs loaded [ 2.979065] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 41.194763] udevd[381]: starting version 173 [ 41.299354] Adding 6142972k swap on /dev/sda5. Priority:-1 extents:1 across:6142972k [ 41.424715] type=1400 audit(1373738272.090:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=520 comm="apparmor_parser" [ 41.472108] tg3 0000:09:00.0: irq 46 for MSI/MSI-X [ 41.506283] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 41.711665] device-mapper: multipath: version 1.3.0 loaded [ 41.732124] lp: driver loaded but no devices found [ 41.927558] wmi: Mapper loaded [ 42.059838] usbcore: registered new interface driver usbserial [ 42.059856] USB Serial support registered for generic [ 42.059875] usbcore: registered new interface driver usbserial_generic [ 42.059877] usbserial: USB Serial Driver core [ 42.067875] USB Serial support registered for Handspring Visor / Palm OS [ 42.067892] USB Serial support registered for Sony Clie 3.5 [ 42.067912] USB Serial support registered for Sony Clie 5.0 [ 42.067937] usbcore: registered new interface driver visor [ 42.067939] visor: USB HandSpring Visor / Palm OS driver [ 42.106725] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 42.156483] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 42.447223] cfg80211: Calling CRDA to update world regulatory domain [ 42.454019] cfg80211: World regulatory domain updated: [ 42.454023] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 42.454027] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.454031] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.454034] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 42.454038] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.454041] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 42.525516] r592 0000:03:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 42.525651] r592: driver successfully loaded [ 42.582338] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 [ 42.599411] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 42.607160] r852 0000:03:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 42.607768] r852: driver loaded successfully [ 42.762650] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s [ 42.762655] iwl3945: Copyright(c) 2003-2011 Intel Corporation [ 42.762731] iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 42.762747] iwl3945 0000:0c:00.0: setting latency timer to 64 [ 42.817236] iwl3945 0000:0c:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 42.817241] iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 42.817399] iwl3945 0000:0c:00.0: irq 47 for MSI/MSI-X [ 42.818508] Registered led device: phy0-led [ 42.818604] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 42.912546] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 43.120468] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 43.275822] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 43.275899] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 43.275940] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 43.648314] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 43.648499] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 43.648653] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 43.648803] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 43.648950] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 43.649100] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 43.649256] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 44.218789] iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9 [ 44.290436] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.212930] input: AT Translated Set 2 keyboard+tsak as /devices/virtual/input/input15 [ 45.489221] ppdev: user-space parallel port driver [ 45.513392] type=1400 audit(1373738276.178:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1199 comm="apparmor_parser" [ 45.514833] type=1400 audit(1373738276.178:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1199 comm="apparmor_parser" [ 45.897119] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0 [ 46.817947] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0 [ 163.621380] NET: Registered protocol family 15 [ 173.649153] type=1400 audit(1373738404.311:5): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=2179 comm="apparmor_parser" [ 173.651160] type=1400 audit(1373738404.311:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=2181 comm="apparmor_parser" [ 173.651685] type=1400 audit(1373738404.311:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=2181 comm="apparmor_parser" [ 173.655946] type=1400 audit(1373738404.315:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2182 comm="apparmor_parser" [ 173.656689] type=1400 audit(1373738404.319:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2182 comm="apparmor_parser" [ 173.657118] type=1400 audit(1373738404.319:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=2179 comm="apparmor_parser" [ 173.659962] type=1400 audit(1373738404.319:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=2183 comm="apparmor_parser" [ 173.661650] type=1400 audit(1373738404.323:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=2179 comm="apparmor_parser" [ 173.663299] type=1400 audit(1373738404.323:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=2184 comm="apparmor_parser" [ 174.760724] init: apport pre-start process (2244) terminated with status 1 [ 174.761765] init: alsa-restore main process (2250) terminated with status 99 [ 174.763592] apm: BIOS not found. [ 174.782369] init: apport post-stop process (2272) terminated with status 1 +++++++++++++++++++++++++++++++++++++++++++++ -- Patricia J. Hawkins

1 1

Broken installation
by ant 07 Jul '13

07 Jul '13

Help! Following what I thought was a routine upgrade of my Debian Jessie/Sid system, Trinity has broken. Completely. Many programs have disappeared from /opt/trinity/bin (most particularly kmail - I'm writing this on an old backup system). In an attempt to recover this, I have (I believe) downgraded the system to Wheezy with the following /etc/apt/sources.list ------ deb http://ftp.nz.debian.org/debian/ wheezy main non-free contrib deb-src http://ftp.nz.debian.org/debian/ wheezy main non-free contrib deb http://security.debian.org/ wheezy/updates main contrib non-free deb-src http://security.debian.org/ wheezy/updates main contrib non-free ### I tried both this set and the ones below deb http://ppa.quickbuild.pearsoncomputing.net/slavek-banko/axis/ubuntu wheezy main deb-src http://ppa.quickbuild.pearsoncomputing.net/slavek-banko/axis/ubuntu wheezy main ##deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main ##deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/debian wheezy main ##deb http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy main ##deb-src http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-v3.5.1… wheezy main ------- After that, apt-get install desktop-base-trinity appears to work. But apt-get install kde-trinity gives: ----- The following packages have unmet dependencies: kde-trinity : Depends: kde-core-trinity (>= 5:47) but it is not going to be installed Depends: kdeaddons-trinity (>= 4:3.5.5) but it is not going to be installed Depends: kdegraphics-trinity (>= 4:3.5.5) but it is not going to be installed Depends: kdepim-trinity (>= 4:3.5.5) but it is not going to be installed Depends: kdeutils-trinity (>= 4:3.5.5) but it is not going to be installed E: Unable to correct problems, you have held broken packages. ----- Several questions: What have I done wrong?! All suggestions welcome... I tried to follow the instructions at http://www.trinitydesktop.org/wiki/bin/view/Documentation/DebianBinaryInsta… Are they actually correct? Has anyone else succeeded in a new or upgraded installation in the last couple of days? cheers anthony -- Sent from my linux system running Debian 8, desktop trinity-KDE. This email is plain text, not HTML. Any attachments are either .jpeg or .pdf

4 5

generate my own keyboard layout (hebrew)
by Uwe Brauer 06 Jul '13

06 Jul '13

Hello I am using periodically the hebrew-phonetic keyboard, but I would like to change its setting. How can I do that and where can I find documentation? thanks Uwe Brauer

1 0

taskbar icons disappeared
by David N Melik 05 Jul '13

05 Jul '13

I am running TDE R14.0.0. Recently, I configured the panel (I think it was just positioning at the middle, doing transparency--which did not work--and choosing the display style and taskbar grouping,) and my taskbar icons disappeared. I changed around the things I had changed many times, and 'show icons' was selected (except a few times turning it off and on to see if that worked)... but they will not come back. If anyone has a solution, it would be good to CC the message to my e-address, because I do not use Gmane much right now, rather than Usenet.

1 0

BADSIG, 404?
by Peter Laws 03 Jul '13

03 Jul '13

Apologies if this has been answered recently, but I'm getting several errors while trying to update. I was getting BADSIG errors, but those seem to be gone and "apt-get update" completes, but now "apt-get dist-upgrade" fails with 404s: Err http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-v3.5.13/ubuntu/ precise/main kubuntu-default-settings-trinity all 4:3.5.13.2-0ubuntu12.04.0+0 404 Not Found etc, etc. If I put that URL into FF, I get to a mirror, so that part seems to be working. Maybe a mirror out of sync? -- Peter Laws / N5UWY National Weather Center / Network Operations Center University of Oklahoma Information Technology plaws(a)ou.edu College of Architecture, Regional and City Planning, MRCP '16 -------------------------------------------------------------------------- Feedback? Contact my director, Matt Younkins, younkinsm(a)ou.edu. Thank you!

3 4

Print preview problem
by ant 02 Jul '13

02 Jul '13

We have two machines running TDE, one 64-bit and one 32-bit, both with 3.5.13.2 on Debian Jessie/Sid. On the 32-bit one, print preview fails with "Preview failed: unable to start program Postscript Info" This is on (for example) kmail or kpdf. On the 64-bit one, no problems. Any suggestions? ---------- 32-bit one --------------- cat /etc/apt/sources.list ... deb http://ppa.quickbuild.pearsoncomputing.net/slavek-banko/axis/ubuntu wheezy main ... cat /etc/debian_version jessie/sid cheers anthony -- Sent from my linux system running Debian 8, desktop trinity-KDE. This email is plain text, not HTML. Any attachments are either .jpeg or .pdf

1 0

Wheezy build
by Curt Howland 01 Jul '13

01 Jul '13

Well, happiness, the Wheezy build has made it! One error, however, W: GPG error: http://ppa.quickbuild.pearsoncomputing.net wheezy Release: The following signatures were invalid: BADSIG 43F1DC4F2B8638D0 QuickBuild Trinity Desktop Environment I made sure to follow the add-key instructions, but the key said "no change" when it was updated. Just FYI, Curt-

2 2

R: kmail error pop3
by sacarde＠libero.it 30 Jun '13

30 Jun '13

is there a way to know more about this error? a verbose kmail log? another log in /var/log... ? thanks sacarde >----Messaggio originale---- >Da: sacarde(a)libero.it >Data: 29/06/2013 11.59 >A: <trinity-users(a)lists.pearsoncomputing.net> >Ogg: R: kmail error pop3 > >I add some informations: > >- with account imap kmail works OK > >- may be a dbus problem? > > > > >thanks > >>----Messaggio originale---- >>Da: sacarde(a)libero.it >>Data: 27/06/2013 9.37 >>A: <trinity-users(a)lists.pearsoncomputing.net> >>Ogg: kmail error pop3 >> >>hi, >> I try to migrate kmail from a system with kdemod3 to tde-kmail >>I copy: >>configuration file (to ~/.trinity/share/config/kmailrc) >>application dir (to ~/.trinity/share/apps/kmail) >> >>but when I start tde-kmail I have error: >> >> >>"could not start process pop3" >> >> >>can you help me? >> >> >> >> >> >>sacarde >> > >

1 0

Re: [trinity-users] Can't reach Mageia 3 repos
by Thierry de Coulon 29 Jun '13

29 Jun '13

On Saturday 29 June 2013 19.34:50 François Andriot wrote: > Hello, > the mirrors are still not synchronized. > There is nothing you can do but wait (I do not know how long). > > Francois No problem, I can wait :) Thank you for the confirmation. Thierry

1 0

Can't reach Mageia 3 repos
by Thierry de Coulon 29 Jun '13

29 Jun '13

Hi all, I gave a try to Mageia 3 today, and wanted to install Trinity Desktop, following the instructions given. However it does not work. When setting up the repositories I get: Retrieving failes : curl failed : exited with 22 no metedata found for medium I tried to check the given url but get: You don't have permission to access Does this mean the Mageia 3 repositories are not yet online, or am I doing something wrong? Regards, Thierry

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

tde-users